Skip to content

L
linux
Commit 998c6103 authored by Kumar Gala's avatar Kumar Gala
Browse files
Options

[POWERPC] fsl: Convert dts to v1 syntax 

Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 280bb34b
Hide whitespace changes
Inline Side-by-side
Showing with 372 additions and 357 deletions
arch/powerpc/boot/dts/ep88xc.dts
View file @ 998c6103
......@@ -2,7 +2,7 @@
* EP88xC Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
* Copyright 2007 Freescale Semiconductor, Inc.
* Copyright 2007,2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -10,6 +10,7 @@
* option) any later version.
*/
/dts-v1/;
/ {
model = "EP88xC";
......@@ -23,44 +24,44 @@ cpus {
PowerPC,885@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <d#16>;
i-cache-line-size = <d#16>;
d-cache-size = <d#8192>;
i-cache-size = <d#8192>;
reg = <0x0>;
d-cache-line-size = <16>;
i-cache-line-size = <16>;
d-cache-size = <8192>;
i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <f 2>; // decrementer interrupt
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <0 0>;
reg = <0x0 0x0>;
};
localbus@fa200100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <fa200100 40>;
reg = <0xfa200100 0x40>;
ranges = <
0 0 fc000000 04000000
3 0 fa000000 01000000
0x0 0x0 0xfc000000 0x4000000
0x3 0x0 0xfa000000 0x1000000
>;
flash@0,2000000 {
compatible = "cfi-flash";
reg = <0 2000000 2000000>;
reg = <0x0 0x2000000 0x2000000>;
bank-width = <4>;
device-width = <2>;
};
board-control@3,400000 {
reg = <3 400000 10>;
reg = <0x3 0x400000 0x10>;
compatible = "fsl,ep88xc-bcsr";
};
};
......@@ -70,25 +71,25 @@ soc@fa200000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 fa200000 00004000>;
ranges = <0x0 0xfa200000 0x4000>;
bus-frequency = <0>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <fa200000 4000>;
reg = <0xfa200000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
reg = <e00 188>;
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
reg = <0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
};
......@@ -97,7 +98,7 @@ ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
reg = <e00 188>;
reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
......@@ -109,7 +110,7 @@ ethernet@1e00 {
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
reg = <1e00 188>;
reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
......@@ -120,7 +121,7 @@ ethernet@1e00 {
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 24>;
reg = <0x0 0x24>;
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
};
......@@ -130,29 +131,29 @@ pcmcia@80 {
#size-cells = <2>;
compatible = "fsl,pq-pcmcia";
device_type = "pcmcia";
reg = <80 80>;
reg = <0x80 0x80>;
interrupt-parent = <&PIC>;
interrupts = <d 1>;
interrupts = <13 1>;
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
command-proc = <9c0>;
command-proc = <0x9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
reg = <9c0 40>;
reg = <0x9c0 0x40>;
ranges;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 2000 2000>;
ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 1c00>;
reg = <0x0 0x1c00>;
};
};
......@@ -160,7 +161,7 @@ brg@9f0 {
compatible = "fsl,mpc885-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <9f0 10>;
reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
......@@ -168,7 +169,7 @@ CPM_PIC: interrupt-controller@930 {
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <930 20>;
reg = <0x930 0x20>;
compatible = "fsl,mpc885-cpm-pic",
"fsl,cpm1-pic";
};
......@@ -178,11 +179,11 @@ serial@a80 {
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a80 10 3e80 40>;
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0090>;
fsl,cpm-command = <0x90>;
linux,planetcore-label = "SMC1";
};
......@@ -191,11 +192,11 @@ serial@a20 {
device_type = "serial";
compatible = "fsl,mpc885-scc-uart",
"fsl,cpm1-scc-uart";
reg = <a20 20 3d00 80>;
interrupts = <1d>;
reg = <0xa20 0x20 0x3d00 0x80>;
interrupts = <29>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <0040>;
fsl,cpm-command = <0x40>;
linux,planetcore-label = "SCC2";
};
......@@ -204,9 +205,9 @@ usb@a00 {
#size-cells = <0>;
compatible = "fsl,mpc885-usb",
"fsl,cpm1-usb";
reg = <a00 18 1c00 80>;
reg = <0xa00 0x18 0x1c00 0x80>;
interrupt-parent = <&CPM_PIC>;
interrupts = <1e>;
interrupts = <30>;
fsl,cpm-command = <0000>;
};
};
......
arch/powerpc/boot/dts/kuroboxHD.dts
View file @ 998c6103
......@@ -7,6 +7,7 @@
* Based on sandpoint.dts
*
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
......@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
*/
/dts-v1/;
/ {
model = "KuroboxHD";
compatible = "linkstation";
......@@ -35,19 +38,19 @@ cpus {
PowerPC,603e { /* Really 8241 */
device_type = "cpu";
reg = <0>;
clock-frequency = <bebc200>; /* Fixed by bootloader */
timebase-frequency = <1743000>; /* Fixed by bootloader */
reg = <0x0>;
clock-frequency = <200000000>; /* Fixed by bootloader */
timebase-frequency = <24391680>; /* Fixed by bootloader */
bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
i-cache-size = <4000>;
d-cache-size = <4000>;
i-cache-size = <0x4000>;
d-cache-size = <0x4000>;
};
};
memory {
device_type = "memory";
reg = <00000000 04000000>;
reg = <0x0 0x4000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
......@@ -56,26 +59,26 @@ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
reg = <80000000 00100000>;
ranges = <80000000 80000000 70000000 /* pci mem space */
fc000000 fc000000 00100000 /* EUMB */
fe000000 fe000000 00c00000 /* pci i/o space */
fec00000 fec00000 00300000 /* pci cfg regs */
fef00000 fef00000 00100000>; /* pci iack */
reg = <0x80000000 0x100000>;
ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */
0xfc000000 0xfc000000 0x100000 /* EUMB */
0xfe000000 0xfe000000 0xc00000 /* pci i/o space */
0xfec00000 0xfec00000 0x300000 /* pci cfg regs */
0xfef00000 0xfef00000 0x100000>; /* pci iack */
i2c@80003000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <80003000 1000>;
reg = <0x80003000 0x1000>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
rtc@32 {
device_type = "rtc";
compatible = "ricoh,rs5c372a";
reg = <32>;
reg = <0x32>;
};
};
......@@ -83,9 +86,9 @@ serial0: serial@80004500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <5d08d88>;
current-speed = <2580>;
reg = <0x80004500 0x8>;
clock-frequency = <97553800>;
current-speed = <9600>;
interrupts = <9 0>;
interrupt-parent = <&mpic>;
};
......@@ -94,10 +97,10 @@ serial1: serial@80004600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <5d08d88>;
current-speed = <e100>;
interrupts = <a 0>;
reg = <0x80004600 0x8>;
clock-frequency = <97553800>;
current-speed = <57600>;
interrupts = <10 0>;
interrupt-parent = <&mpic>;
};
......@@ -107,7 +110,7 @@ mpic: interrupt-controller@80040000 {
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <80040000 40000>;
reg = <0x80040000 0x40000>;
};
pci0: pci@fec00000 {
......@@ -116,29 +119,29 @@ pci0: pci@fec00000 {
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
reg = <fec00000 400000>;
ranges = <01000000 0 0 fe000000 0 00c00000
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
reg = <0xfec00000 0x400000>;
ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000
0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
bus-range = <0 255>;
clock-frequency = <133333333>;
interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
5800 0 0 1 &mpic 0 1
5800 0 0 2 &mpic 1 1
5800 0 0 3 &mpic 2 1
5800 0 0 4 &mpic 3 1
0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 12 - IRQ1 IDE0 */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 0 1
0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 14 - IRQ3 USB2.0 */
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 3 1
7000 0 0 3 &mpic 3 1
7000 0 0 4 &mpic 3 1
0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
};
};
......
arch/powerpc/boot/dts/kuroboxHG.dts
View file @ 998c6103
......@@ -7,6 +7,7 @@
* Based on sandpoint.dts
*
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
......@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
*/
/dts-v1/;
/ {
model = "KuroboxHG";
compatible = "linkstation";
......@@ -35,19 +38,19 @@ cpus {
PowerPC,603e { /* Really 8241 */
device_type = "cpu";
reg = <0>;
clock-frequency = <fdad680>; /* Fixed by bootloader */
timebase-frequency = <1F04000>; /* Fixed by bootloader */
reg = <0x0>;
clock-frequency = <266000000>; /* Fixed by bootloader */
timebase-frequency = <32522240>; /* Fixed by bootloader */
bus-frequency = <0>; /* Fixed by bootloader */
/* Following required by dtc but not used */
i-cache-size = <4000>;
d-cache-size = <4000>;
i-cache-size = <0x4000>;
d-cache-size = <0x4000>;
};
};
memory {
device_type = "memory";
reg = <00000000 08000000>;
reg = <0x0 0x8000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
......@@ -56,26 +59,26 @@ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
reg = <80000000 00100000>;
ranges = <80000000 80000000 70000000 /* pci mem space */
fc000000 fc000000 00100000 /* EUMB */
fe000000 fe000000 00c00000 /* pci i/o space */
fec00000 fec00000 00300000 /* pci cfg regs */
fef00000 fef00000 00100000>; /* pci iack */
reg = <0x80000000 0x100000>;
ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */
0xfc000000 0xfc000000 0x100000 /* EUMB */
0xfe000000 0xfe000000 0xc00000 /* pci i/o space */
0xfec00000 0xfec00000 0x300000 /* pci cfg regs */
0xfef00000 0xfef00000 0x100000>; /* pci iack */
i2c@80003000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <80003000 1000>;
reg = <0x80003000 0x1000>;
interrupts = <5 2>;
interrupt-parent = <&mpic>;
rtc@32 {
device_type = "rtc";
compatible = "ricoh,rs5c372a";
reg = <32>;
reg = <0x32>;
};
};
......@@ -83,9 +86,9 @@ serial0: serial@80004500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <7c044a8>;
current-speed = <2580>;
reg = <0x80004500 0x8>;
clock-frequency = <130041000>;
current-speed = <9600>;
interrupts = <9 0>;
interrupt-parent = <&mpic>;
};
......@@ -94,10 +97,10 @@ serial1: serial@80004600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <7c044a8>;
current-speed = <e100>;
interrupts = <a 0>;
reg = <0x80004600 0x8>;
clock-frequency = <130041000>;
current-speed = <57600>;
interrupts = <10 0>;
interrupt-parent = <&mpic>;
};
......@@ -107,7 +110,7 @@ mpic: interrupt-controller@80040000 {
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <80040000 40000>;
reg = <0x80040000 0x40000>;
};
pci0: pci@fec00000 {
......@@ -116,29 +119,29 @@ pci0: pci@fec00000 {
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
reg = <fec00000 400000>;
ranges = <01000000 0 0 fe000000 0 00c00000
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
reg = <0xfec00000 0x400000>;
ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000
0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
bus-range = <0 255>;
clock-frequency = <133333333>;
interrupt-parent = <&mpic>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 11 - IRQ0 ETH */
5800 0 0 1 &mpic 0 1
5800 0 0 2 &mpic 1 1
5800 0 0 3 &mpic 2 1
5800 0 0 4 &mpic 3 1
0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 12 - IRQ1 IDE0 */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 0 1
0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 14 - IRQ3 USB2.0 */
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 3 1
7000 0 0 3 &mpic 3 1
7000 0 0 4 &mpic 3 1
0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
};
};
......
arch/powerpc/boot/dts/mpc7448hpc2.dts
View file @ 998c6103
/*
* MPC7448HPC2 (Taiga) board Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
* Copyright 2006, 2008 Freescale Semiconductor Inc.
* 2006 Roy Zang <Roy Zang at freescale.com>.
*
* This program is free software; you can redistribute it and/or modify it
......@@ -10,6 +10,7 @@
* option) any later version.
*/
/dts-v1/;
/ {
model = "mpc7448hpc2";
......@@ -23,11 +24,11 @@ cpus {
PowerPC,7448@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K bytes
i-cache-size = <8000>; // L1, 32K bytes
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K bytes
i-cache-size = <0x8000>; // L1, 32K bytes
timebase-frequency = <0>; // 33 MHz, from uboot
clock-frequency = <0>; // From U-Boot
bus-frequency = <0>; // From U-Boot
......@@ -36,7 +37,7 @@ PowerPC,7448@0 {
memory {
device_type = "memory";
reg = <00000000 20000000 // DDR2 512M at 0
reg = <0x0 0x20000000 // DDR2 512M at 0
>;
};
......@@ -44,14 +45,14 @@ tsi108@c0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "tsi-bridge";
ranges = <00000000 c0000000 00010000>;
reg = <c0000000 00010000>;
ranges = <0x0 0xc0000000 0x10000>;
reg = <0xc0000000 0x10000>;
bus-frequency = <0>;
i2c@7000 {
interrupt-parent = <&mpic>;
interrupts = <E 0>;
reg = <7000 400>;
interrupts = <14 0>;
reg = <0x7000 0x400>;
device_type = "i2c";
compatible = "tsi108-i2c";
};
......@@ -59,20 +60,20 @@ i2c@7000 {
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi108-mdio";
reg = <6000 50>;
reg = <0x6000 0x50>;
#address-cells = <1>;
#size-cells = <0>;
phy8: ethernet-phy@8 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <8>;
reg = <0x8>;
};
phy9: ethernet-phy@9 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <9>;
reg = <0x9>;
};
};
......@@ -82,9 +83,9 @@ ethernet@6200 {
#size-cells = <0>;
device_type = "network";
compatible = "tsi108-ethernet";
reg = <6000 200>;
reg = <0x6000 0x200>;
address = [ 00 06 D2 00 00 01 ];
interrupts = <10 2>;
interrupts = <16 2>;
interrupt-parent = <&mpic>;
mdio-handle = <&MDIO>;
phy-handle = <&phy8>;
......@@ -96,9 +97,9 @@ ethernet@6600 {
#size-cells = <0>;
device_type = "network";
compatible = "tsi108-ethernet";
reg = <6400 200>;
reg = <0x6400 0x200>;
address = [ 00 06 D2 00 00 02 ];
interrupts = <11 2>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
mdio-handle = <&MDIO>;
phy-handle = <&phy9>;
......@@ -107,18 +108,18 @@ ethernet@6600 {
serial@7808 {
device_type = "serial";
compatible = "ns16550";
reg = <7808 200>;
clock-frequency = <3f6b5a00>;
interrupts = <c 0>;
reg = <0x7808 0x200>;
clock-frequency = <1064000000>;
interrupts = <12 0>;
interrupt-parent = <&mpic>;
};
serial@7c08 {
device_type = "serial";
compatible = "ns16550";
reg = <7c08 200>;
clock-frequency = <3f6b5a00>;
interrupts = <d 0>;
reg = <0x7c08 0x200>;
clock-frequency = <1064000000>;
interrupts = <13 0>;
interrupt-parent = <&mpic>;
};
......@@ -127,7 +128,7 @@ mpic: pic@7400 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <7400 400>;
reg = <0x7400 0x400>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
......@@ -138,39 +139,39 @@ pci@1000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <1000 1000>;
reg = <0x1000 0x1000>;
bus-range = <0 0>;
ranges = <02000000 0 e0000000 e0000000 0 1A000000
01000000 0 00000000 fa000000 0 00010000>;
clock-frequency = <7f28154>;
ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000
0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
clock-frequency = <133333332>;
interrupt-parent = <&mpic>;
interrupts = <17 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupts = <23 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0800 0 0 1 &RT0 24 0
0800 0 0 2 &RT0 25 0
0800 0 0 3 &RT0 26 0
0800 0 0 4 &RT0 27 0
0x800 0x0 0x0 0x1 &RT0 0x24 0x0
0x800 0x0 0x0 0x2 &RT0 0x25 0x0
0x800 0x0 0x0 0x3 &RT0 0x26 0x0
0x800 0x0 0x0 0x4 &RT0 0x27 0x0
/* IDSEL 0x12 */
1000 0 0 1 &RT0 25 0
1000 0 0 2 &RT0 26 0
1000 0 0 3 &RT0 27 0
1000 0 0 4 &RT0 24 0
0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
/* IDSEL 0x13 */
1800 0 0 1 &RT0 26 0
1800 0 0 2 &RT0 27 0
1800 0 0 3 &RT0 24 0
1800 0 0 4 &RT0 25 0
0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
/* IDSEL 0x14 */
2000 0 0 1 &RT0 27 0
2000 0 0 2 &RT0 24 0
2000 0 0 3 &RT0 25 0
2000 0 0 4 &RT0 26 0
0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
......@@ -180,7 +181,7 @@ RT0: router@1180 {
#address-cells = <0>;
#interrupt-cells = <2>;
big-endian;
interrupts = <17 2>;
interrupts = <23 2>;
interrupt-parent = <&mpic>;
};
};
......
arch/powerpc/boot/dts/mpc8272ads.dts
View file @ 998c6103
/*
* MPC8272 ADS Device Tree Source
*
* Copyright 2005 Freescale Semiconductor Inc.
* Copyright 2005,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -9,6 +9,8 @@
* option) any later version.
*/
/dts-v1/;
/ {
model = "MPC8272ADS";
compatible = "fsl,mpc8272ads";
......@@ -21,11 +23,11 @@ cpus {
PowerPC,8272@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <d#32>;
i-cache-line-size = <d#32>;
d-cache-size = <d#16384>;
i-cache-size = <d#16384>;
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
......@@ -34,7 +36,7 @@ PowerPC,8272@0 {
memory {
device_type = "memory";
reg = <0 0>;
reg = <0x0 0x0>;
};
localbus@f0010100 {
......@@ -42,21 +44,21 @@ localbus@f0010100 {
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <f0010100 40>;
reg = <0xf0010100 0x40>;
ranges = <0 0 fe000000 02000000
1 0 f4500000 00008000
3 0 f8200000 00008000>;
ranges = <0x0 0x0 0xfe000000 0x2000000
0x1 0x0 0xf4500000 0x8000
0x3 0x0 0xf8200000 0x8000>;
flash@0,0 {
compatible = "jedec-flash";
reg = <0 0 2000000>;
reg = <0x0 0x0 0x2000000>;
bank-width = <4>;
device-width = <1>;
};
board-control@1,0 {
reg = <1 0 20>;
reg = <0x1 0x0 0x20>;
compatible = "fsl,mpc8272ads-bcsr";
};
......@@ -65,46 +67,46 @@ PCI_PIC: interrupt-controller@3,0 {
"fsl,pq2ads-pci-pic";
#interrupt-cells = <1>;
interrupt-controller;
reg = <3 0 8>;
reg = <0x3 0x0 0x8>;
interrupt-parent = <&PIC>;
interrupts = <14 8>;
interrupts = <20 8>;
};
};
pci@f0010800 {
device_type = "pci";
reg = <f0010800 10c f00101ac 8 f00101c4 8>;
reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
clock-frequency = <d#66666666>;
interrupt-map-mask = <f800 0 0 7>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x16 */
b000 0 0 1 &PCI_PIC 0
b000 0 0 2 &PCI_PIC 1
b000 0 0 3 &PCI_PIC 2
b000 0 0 4 &PCI_PIC 3
0xb000 0x0 0x0 0x1 &PCI_PIC 0
0xb000 0x0 0x0 0x2 &PCI_PIC 1
0xb000 0x0 0x0 0x3 &PCI_PIC 2
0xb000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 0x17 */
b800 0 0 1 &PCI_PIC 4
b800 0 0 2 &PCI_PIC 5
b800 0 0 3 &PCI_PIC 6
b800 0 0 4 &PCI_PIC 7
0xb800 0x0 0x0 0x1 &PCI_PIC 4
0xb800 0x0 0x0 0x2 &PCI_PIC 5
0xb800 0x0 0x0 0x3 &PCI_PIC 6
0xb800 0x0 0x0 0x4 &PCI_PIC 7
/* IDSEL 0x18 */
c000 0 0 1 &PCI_PIC 8
c000 0 0 2 &PCI_PIC 9
c000 0 0 3 &PCI_PIC a
c000 0 0 4 &PCI_PIC b>;
0xc000 0x0 0x0 0x1 &PCI_PIC 8
0xc000 0x0 0x0 0x2 &PCI_PIC 9
0xc000 0x0 0x0 0x3 &PCI_PIC 10
0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
interrupt-parent = <&PIC>;
interrupts = <12 8>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 f6000000 0 02000000>;
interrupts = <18 8>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
};
soc@f0000000 {
......@@ -112,26 +114,26 @@ soc@f0000000 {
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8272", "fsl,pq2-soc";
ranges = <00000000 f0000000 00053000>;
ranges = <0x0 0xf0000000 0x53000>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <f0000000 00053000>;
reg = <0xf0000000 0x53000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
reg = <119c0 30>;
reg = <0x119c0 0x30>;
ranges;
muram@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 10000>;
ranges = <0x0 0x0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 2000 9800 800>;
reg = <0x0 0x2000 0x9800 0x800>;
};
};
......@@ -139,29 +141,29 @@ brg@119f0 {
compatible = "fsl,mpc8272-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <119f0 10 115f0 10>;
reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8272-scc-uart",
"fsl,cpm2-scc-uart";
reg = <11a00 20 8000 100>;
interrupts = <28 8>;
reg = <0x11a00 0x20 0x8000 0x100>;
interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <00800000>;
fsl,cpm-command = <0x800000>;
};
serial@11a60 {
device_type = "serial";
compatible = "fsl,mpc8272-scc-uart",
"fsl,cpm2-scc-uart";
reg = <11a60 20 8300 100>;
interrupts = <2b 8>;
reg = <0x11a60 0x20 0x8300 0x100>;
interrupts = <43 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <4>;
fsl,cpm-command = <0ce00000>;
fsl,cpm-command = <0xce00000>;
};
mdio@10d40 {
......@@ -169,23 +171,23 @@ mdio@10d40 {
compatible = "fsl,mpc8272ads-mdio-bitbang",
"fsl,mpc8272-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
reg = <10d40 14>;
reg = <0x10d40 0x14>;
#address-cells = <1>;
#size-cells = <0>;
fsl,mdio-pin = <12>;
fsl,mdc-pin = <13>;
fsl,mdio-pin = <18>;
fsl,mdc-pin = <19>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
interrupts = <17 8>;
reg = <0>;
interrupts = <23 8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
interrupts = <17 8>;
reg = <3>;
interrupts = <23 8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
......@@ -194,33 +196,33 @@ ethernet@11300 {
device_type = "network";
compatible = "fsl,mpc8272-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11300 20 8400 100 11390 1>;
reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8>;
interrupts = <32 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <12000300>;
fsl,cpm-command = <0x12000300>;
};
ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8272-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11320 20 8500 100 113b0 1>;
reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <21 8>;
interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
fsl,cpm-command = <16200300>;
fsl,cpm-command = <0x16200300>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
reg = <10c00 80>;
reg = <0x10c00 0x80>;
compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
};
......@@ -232,14 +234,14 @@ crypto@30000 {
"fsl,talitos-sec2",
"fsl,talitos",
"talitos";
reg = <30000 10000>;
interrupts = <b 8>;
reg = <0x30000 0x10000>;
interrupts = <11 8>;
interrupt-parent = <&PIC>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
channel-fifo-len = <24>;
exec-units-mask = <0x7e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
descriptor-types-mask = <01010ebf>;
descriptor-types-mask = <0x1010ebf>;
};
};
......
arch/powerpc/boot/dts/mpc866ads.dts
View file @ 998c6103
......@@ -2,6 +2,7 @@
* MPC866 ADS Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -9,6 +10,7 @@
* option) any later version.
*/
/dts-v1/;
/ {
model = "MPC866ADS";
......@@ -22,37 +24,37 @@ cpus {
PowerPC,866@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <10>; // 16 bytes
i-cache-line-size = <10>; // 16 bytes
d-cache-size = <2000>; // L1, 8K
i-cache-size = <4000>; // L1, 16K
reg = <0x0>;
d-cache-line-size = <16>; // 16 bytes
i-cache-line-size = <16>; // 16 bytes
d-cache-size = <0x2000>; // L1, 8K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <f 2>; // decrementer interrupt
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <00000000 800000>;
reg = <0x0 0x800000>;
};
localbus@ff000100 {
compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <ff000100 40>;
reg = <0xff000100 0x40>;
ranges = <
1 0 ff080000 00008000
5 0 ff0a0000 00008000
0x1 0x0 0xff080000 0x8000
0x5 0x0 0xff0a0000 0x8000
>;
board-control@1,0 {
reg = <1 0 20 5 300 4>;
reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
compatible = "fsl,mpc866ads-bcsr";
};
};
......@@ -61,17 +63,17 @@ soc@ff000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 ff000000 00100000>;
reg = <ff000000 00000200>;
ranges = <0x0 0xff000000 0x100000>;
reg = <0xff000000 0x200>;
bus-frequency = <0>;
mdio@e00 {
compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
reg = <e00 188>;
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY: ethernet-phy@f {
reg = <f>;
reg = <0xf>;
device_type = "ethernet-phy";
};
};
......@@ -80,7 +82,7 @@ ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc866-fec-enet",
"fsl,pq1-fec-enet";
reg = <e00 188>;
reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
......@@ -91,7 +93,7 @@ ethernet@e00 {
PIC: pic@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 24>;
reg = <0x0 0x24>;
compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
};
......@@ -100,7 +102,7 @@ cpm@9c0 {
#size-cells = <1>;
compatible = "fsl,mpc866-cpm", "fsl,cpm1";
ranges;
reg = <9c0 40>;
reg = <0x9c0 0x40>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
......@@ -108,11 +110,11 @@ cpm@9c0 {
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 2000 2000>;
ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 1c00>;
reg = <0x0 0x1c00>;
};
};
......@@ -120,7 +122,7 @@ brg@9f0 {
compatible = "fsl,mpc866-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <9f0 10>;
reg = <0x9f0 0x10>;
clock-frequency = <0>;
};
......@@ -130,7 +132,7 @@ CPM_PIC: pic@930 {
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <930 20>;
reg = <0x930 0x20>;
compatible = "fsl,mpc866-cpm-pic",
"fsl,cpm1-pic";
};
......@@ -140,31 +142,31 @@ serial@a80 {
device_type = "serial";
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a80 10 3e80 40>;
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0090>;
fsl,cpm-command = <0x90>;
};
serial@a90 {
device_type = "serial";
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a90 10 3f80 40>;
reg = <0xa90 0x10 0x3f80 0x40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <00d0>;
fsl,cpm-command = <0xd0>;
};
ethernet@a00 {
device_type = "network";
compatible = "fsl,mpc866-scc-enet",
"fsl,cpm1-scc-enet";
reg = <a00 18 3c00 100>;
reg = <0xa00 0x18 0x3c00 0x100>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1e>;
interrupts = <30>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-command = <0000>;
linux,network-index = <1>;
......
arch/powerpc/boot/dts/mpc885ads.dts
View file @ 998c6103
......@@ -2,7 +2,7 @@
* MPC885 ADS Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
* Copyright 2007 Freescale Semiconductor, Inc.
* Copyright 2007,2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -10,6 +10,7 @@
* option) any later version.
*/
/dts-v1/;
/ {
model = "MPC885ADS";
......@@ -23,45 +24,45 @@ cpus {
PowerPC,885@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <d#16>;
i-cache-line-size = <d#16>;
d-cache-size = <d#8192>;
i-cache-size = <d#8192>;
reg = <0x0>;
d-cache-line-size = <16>;
i-cache-line-size = <16>;
d-cache-size = <8192>;
i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <f 2>; // decrementer interrupt
interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
reg = <0 0>;
reg = <0x0 0x0>;
};
localbus@ff000100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <ff000100 40>;
reg = <0xff000100 0x40>;
ranges = <
0 0 fe000000 00800000
1 0 ff080000 00008000
5 0 ff0a0000 00008000
0x0 0x0 0xfe000000 0x800000
0x1 0x0 0xff080000 0x8000
0x5 0x0 0xff0a0000 0x8000
>;
flash@0,0 {
compatible = "jedec-flash";
reg = <0 0 800000>;
reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
board-control@1,0 {
reg = <1 0 20 5 300 4>;
reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
compatible = "fsl,mpc885ads-bcsr";
};
};
......@@ -71,30 +72,30 @@ soc@ff000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 ff000000 00004000>;
ranges = <0x0 0xff000000 0x4000>;
bus-frequency = <0>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <ff000000 4000>;
reg = <0xff000000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
reg = <e00 188>;
reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
reg = <0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
reg = <1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
reg = <2>;
reg = <0x2>;
device_type = "ethernet-phy";
};
};
......@@ -103,7 +104,7 @@ ethernet@e00 {
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
reg = <e00 188>;
reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
......@@ -115,7 +116,7 @@ ethernet@1e00 {
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
reg = <1e00 188>;
reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
......@@ -126,7 +127,7 @@ ethernet@1e00 {
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 24>;
reg = <0x0 0x24>;
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
};
......@@ -136,29 +137,29 @@ pcmcia@80 {
#size-cells = <2>;
compatible = "fsl,pq-pcmcia";
device_type = "pcmcia";
reg = <80 80>;
reg = <0x80 0x80>;
interrupt-parent = <&PIC>;
interrupts = <d 1>;
interrupts = <13 1>;
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
command-proc = <9c0>;
command-proc = <0x9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
reg = <9c0 40>;
reg = <0x9c0 0x40>;
ranges;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 2000 2000>;
ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 1c00>;
reg = <0x0 0x1c00>;
};
};
......@@ -167,7 +168,7 @@ brg@9f0 {
"fsl,cpm1-brg",
"fsl,cpm-brg";
clock-frequency = <0>;
reg = <9f0 10>;
reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
......@@ -175,7 +176,7 @@ CPM_PIC: interrupt-controller@930 {
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
reg = <930 20>;
reg = <0x930 0x20>;
compatible = "fsl,mpc885-cpm-pic",
"fsl,cpm1-pic";
};
......@@ -184,34 +185,34 @@ serial@a80 {
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a80 10 3e80 40>;
reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0090>;
fsl,cpm-command = <0x90>;
};
serial@a90 {
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a90 10 3f80 40>;
reg = <0xa90 0x10 0x3f80 0x40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <00d0>;
fsl,cpm-command = <0xd0>;
};
ethernet@a40 {
device_type = "network";
compatible = "fsl,mpc885-scc-enet",
"fsl,cpm1-scc-enet";
reg = <a40 18 3e00 100>;
reg = <0xa40 0x18 0x3e00 0x100>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1c>;
interrupts = <28>;
interrupt-parent = <&CPM_PIC>;
phy-handle = <&PHY2>;
fsl,cpm-command = <0080>;
fsl,cpm-command = <0x80>;
linux,network-index = <2>;
};
};
......
arch/powerpc/boot/dts/pq2fads.dts
View file @ 998c6103
/*
* Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
*
* Copyright 2007 Freescale Semiconductor Inc.
* Copyright 2007,2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -9,6 +9,8 @@
* option) any later version.
*/
/dts-v1/;
/ {
model = "pq2fads";
compatible = "fsl,pq2fads";
......@@ -21,11 +23,11 @@ cpus {
cpu@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <d#32>;
i-cache-line-size = <d#32>;
d-cache-size = <d#16384>;
i-cache-size = <d#16384>;
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>;
clock-frequency = <0>;
};
......@@ -33,7 +35,7 @@ cpu@0 {
memory {
device_type = "memory";
reg = <0 0>;
reg = <0x0 0x0>;
};
localbus@f0010100 {
......@@ -41,67 +43,67 @@ localbus@f0010100 {
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <f0010100 60>;
reg = <0xf0010100 0x60>;
ranges = <0 0 fe000000 00800000
1 0 f4500000 00008000
8 0 f8200000 00008000>;
ranges = <0x0 0x0 0xfe000000 0x800000
0x1 0x0 0xf4500000 0x8000
0x8 0x0 0xf8200000 0x8000>;
flash@0,0 {
compatible = "jedec-flash";
reg = <0 0 800000>;
reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
bcsr@1,0 {
reg = <1 0 20>;
reg = <0x1 0x0 0x20>;
compatible = "fsl,pq2fads-bcsr";
};
PCI_PIC: pic@8,0 {
#interrupt-cells = <1>;
interrupt-controller;
reg = <8 0 8>;
reg = <0x8 0x0 0x8>;
compatible = "fsl,pq2ads-pci-pic";
interrupt-parent = <&PIC>;
interrupts = <18 8>;
interrupts = <24 8>;
};
};
pci@f0010800 {
device_type = "pci";
reg = <f0010800 10c f00101ac 8 f00101c4 8>;
reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
clock-frequency = <d#66000000>;
interrupt-map-mask = <f800 0 0 7>;
clock-frequency = <66000000>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x16 */
b000 0 0 1 &PCI_PIC 0
b000 0 0 2 &PCI_PIC 1
b000 0 0 3 &PCI_PIC 2
b000 0 0 4 &PCI_PIC 3
0xb000 0x0 0x0 0x1 &PCI_PIC 0
0xb000 0x0 0x0 0x2 &PCI_PIC 1
0xb000 0x0 0x0 0x3 &PCI_PIC 2
0xb000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 0x17 */
b800 0 0 1 &PCI_PIC 4
b800 0 0 2 &PCI_PIC 5
b800 0 0 3 &PCI_PIC 6
b800 0 0 4 &PCI_PIC 7
0xb800 0x0 0x0 0x1 &PCI_PIC 4
0xb800 0x0 0x0 0x2 &PCI_PIC 5
0xb800 0x0 0x0 0x3 &PCI_PIC 6
0xb800 0x0 0x0 0x4 &PCI_PIC 7
/* IDSEL 0x18 */
c000 0 0 1 &PCI_PIC 8
c000 0 0 2 &PCI_PIC 9
c000 0 0 3 &PCI_PIC a
c000 0 0 4 &PCI_PIC b>;
0xc000 0x0 0x0 0x1 &PCI_PIC 8
0xc000 0x0 0x0 0x2 &PCI_PIC 9
0xc000 0x0 0x0 0x3 &PCI_PIC 10
0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
interrupt-parent = <&PIC>;
interrupts = <12 8>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 f6000000 0 02000000>;
interrupts = <18 8>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
};
soc@f0000000 {
......@@ -109,27 +111,27 @@ soc@f0000000 {
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8280", "fsl,pq2-soc";
ranges = <00000000 f0000000 00053000>;
ranges = <0x0 0xf0000000 0x53000>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <f0000000 00053000>;
reg = <0xf0000000 0x53000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
reg = <119c0 30>;
reg = <0x119c0 0x30>;
ranges;
muram@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 10000>;
ranges = <0x0 0x0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 2000 9800 800>;
reg = <0x0 0x2000 0x9800 0x800>;
};
};
......@@ -137,53 +139,53 @@ brg@119f0 {
compatible = "fsl,mpc8280-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <119f0 10 115f0 10>;
reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
reg = <11a00 20 8000 100>;
interrupts = <28 8>;
reg = <0x11a00 0x20 0x8000 0x100>;
interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <00800000>;
fsl,cpm-command = <0x800000>;
};
serial@11a20 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
reg = <11a20 20 8100 100>;
interrupts = <29 8>;
reg = <0x11a20 0x20 0x8100 0x100>;
interrupts = <41 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <04a00000>;
fsl,cpm-command = <0x4a00000>;
};
ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11320 20 8500 100 113b0 1>;
interrupts = <21 8>;
reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <16200300>;
fsl,cpm-command = <0x16200300>;
};
ethernet@11340 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11340 20 8600 100 113d0 1>;
interrupts = <22 8>;
reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
interrupts = <34 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
fsl,cpm-command = <1a400300>;
fsl,cpm-command = <0x1a400300>;
local-mac-address = [00 e0 0c 00 79 01];
};
......@@ -194,21 +196,21 @@ mdio@10d40 {
"fsl,cpm2-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
reg = <10d40 14>;
reg = <0x10d40 0x14>;
fsl,mdio-pin = <9>;
fsl,mdc-pin = <a>;
fsl,mdc-pin = <10>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
interrupts = <19 2>;
reg = <0>;
interrupts = <25 2>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
interrupts = <19 2>;
reg = <3>;
interrupts = <25 2>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
......@@ -218,17 +220,17 @@ usb@11b60 {
#size-cells = <0>;
compatible = "fsl,mpc8280-usb",
"fsl,cpm2-usb";
reg = <11b60 18 8b00 100>;
reg = <0x11b60 0x18 0x8b00 0x100>;
interrupt-parent = <&PIC>;
interrupts = <b 8>;
fsl,cpm-command = <2e600000>;
interrupts = <11 8>;
fsl,cpm-command = <0x2e600000>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
reg = <10c00 80>;
reg = <0x10c00 0x80>;
compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7