ARM: dts: s5pv210: Correct fuelgauge definition on Aries

Correct the fuelgauge definition because only the fuelgauge on
fascinate4g has interrupt support (and even then it was wrong).

Also, assign the GPIO pinctrl so the interrupt is properly configured
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm/boot/dts/s5pv210-aries.dtsi

@@ -425,10 +425,8 @@ i2c_fuel: i2c-gpio-4 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&fg_i2c_pins>;
 
-		fuelgauge@36 {
+		fg: fuelgauge@36 {
 			compatible = "maxim,max17040";
-			interrupt-parent = <&vic0>;
-			interrupts = <7>;
 			reg = <0x36>;
 		};
 	};

arch/arm/boot/dts/s5pv210-fascinate4g.dts

@@ -37,10 +37,27 @@ vol-up {
 	};
 };
 
+&fg {
+	compatible = "maxim,max77836-battery";
+
+	interrupt-parent = <&gph3>;
+	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&fg_irq>;
+};
+
 &pinctrl0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
+	fg_irq: fg-irq {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	/* Based on vendor kernel v2.6.35.7 */
 	sleep_cfg: sleep-cfg {
 		PIN_SLP(gpa0-0, PREV, NONE);