uwb: add initial documentation

Documentation (and example utilities) for the UWB (and WUSB) stacks.

Some of the documentation may be out-of-date.
Signed-off-by: David Vrabel <david.vrabel@csr.com>

Documentation/usb/wusb-cbaf

+#! /bin/bash
+#
+
+set -e
+
+progname=$(basename $0)
+function help
+{
+    cat <<EOF
+Usage: $progname COMMAND DEVICEs [ARGS]
+
+Command for manipulating the pairing/authentication credentials of a
+Wireless USB device that supports wired-mode Cable-Based-Association.
+
+Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org.
+
+
+DEVICE
+
+ sysfs path to the device to authenticate; for example, both this
+ guys are the same:
+
+ /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1
+ /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1
+
+COMMAND/ARGS are
+
+ start
+
+   Start a WUSB host controller (by setting up a CHID)
+
+ set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME
+
+   Sets host information in the device; after this you can call the
+   get-cdid to see how does this device report itself to us.
+
+ get-cdid DEVICE
+
+   Get the device ID associated to the HOST-CHDI we sent with
+   'set-chid'. We might not know about it.
+
+ set-cc DEVICE
+
+   If we allow the device to connect, set a random new CDID and CK
+   (connection key). Device saves them for the next time it wants to
+   connect wireless. We save them for that next time also so we can
+   authenticate the device (when we see the CDID he uses to id
+   itself) and the CK to crypto talk to it.
+
+CHID is always 16 hex bytes in 'XX YY ZZ...' form
+BANDGROUP is almost always 0001
+
+Examples:
+
+  You can default most arguments to '' to get a sane value:
+
+  $ $progname set-chid '' '' '' "My host name"
+
+  A full sequence:
+
+  $ $progname set-chid '' '' '' "My host name"
+  $ $progname get-cdid ''
+  $ $progname set-cc ''
+
+EOF
+}
+
+
+# Defaults
+# FIXME: CHID should come from a database :), band group from the host
+host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff"
+host_band_group="0001"
+host_name="Linux-WUSB"
+
+devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)"
+hdevs="$(find /sys -name wusb_chid -printf "%h\n")"
+
+result=0
+case $1 in
+    start)
+        for dev in ${2:-$hdevs}
+          do
+          uwb_rc=$(find $(dirname $(dirname $dev)) -iname uwb_rc:uwb*)
+          if cat $uwb_rc/uwb_rc/beacon | grep -q "channel: -1"
+              then
+              echo 13 0 | cat > $uwb_rc/uwb_rc/beacon
+              echo I: started beaconing on ch 13 in host $(basename $uwb_rc)
+          fi
+          echo $host_CHID | cat > $dev/wusb_chid
+          echo I: started host $(basename $dev)
+        done
+        ;;
+    set-chid)
+        shift
+        for dev in ${2:-$devs}
+          do
+          echo "${2:-$host_CHID}" "${3:-$host_band_group}" "${4:-$host_name}" \
+              | cat > $dev/wusb_host_info
+        done
+        ;;
+    get-cdid)
+        for dev in ${2:-$devs}
+          do
+          cat $dev/wusb_cdid
+        done
+        ;;
+    set-cc)
+        for dev in ${2:-$devs}
+          do
+          shift
+          CDID="$(head --bytes=16 /dev/urandom  | od -tx1 -An)"
+          CK="$(head --bytes=16 /dev/urandom  | od -tx1 -An)"
+          cat > $dev/wusb_cc <<EOF
+CDID:$CDID
+CK:$CK
+EOF
+          cat <<EOF
+I: CC set
+CHID: $host_CHID
+CDID:$CDID
+CK:  $CK
+EOF
+        done
+        ;;
+    help|h|--help|-h)
+        help
+        ;;
+    *)
+        echo "E: Unknown usage" 1>&2
+        help 1>&2
+        result=1
+esac
+exit $result