Commit 99d67fb9 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Eduardo Valentin

thermal: exynos: remove identical values from exynos*_tmu_registers structures

There is no need for abstracting configuration for registers that
are identical on all SoC types.

There should be no functional changes caused by this patch.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Tested-by: default avatarAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: default avatarEduardo Valentin <edubezval@gmail.com>
parent 9c7a87f1
......@@ -174,7 +174,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
......@@ -184,7 +184,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
if (!data->temp_error2)
data->temp_error2 =
(pdata->efuse_value >> reg->triminfo_85_shift) &
(pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
rising_threshold = readl(data->base + reg->threshold_th0);
......@@ -274,11 +274,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
con |= (pdata->gain << reg->buf_slope_sel_shift);
con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
......@@ -287,7 +287,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
}
if (on) {
con |= (1 << reg->core_en_shift);
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
......@@ -297,7 +297,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
con &= ~(1 << reg->core_en_shift);
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
......
......@@ -77,20 +77,12 @@ enum soc_type {
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @triminfo_data: register containing 2 pont trimming data
* @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
* @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
* @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
* @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
* @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
register.
* @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
* @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
* @threshold_temp: register containing the base threshold level.
......@@ -119,22 +111,15 @@ enum soc_type {
*/
struct exynos_tmu_registers {
u32 triminfo_data;
u32 triminfo_25_shift;
u32 triminfo_85_shift;
u32 triminfo_ctrl;
u32 triminfo_ctrl1;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
u32 buf_vref_sel_shift;
u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
u32 therm_trip_mode_mask;
u32 therm_trip_en_shift;
u32 buf_slope_sel_shift;
u32 buf_slope_sel_mask;
u32 core_en_shift;
u32 tmu_status;
......
......@@ -27,14 +27,7 @@
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
......@@ -94,18 +87,11 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
......@@ -183,19 +169,12 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
......@@ -286,18 +265,11 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
......@@ -378,17 +350,10 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
......@@ -477,17 +442,10 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment