scsi: qla2xxx: Add ql2xiniexchg parameter

Previously, the ql2xexchoffld module parameter was used to control the
max number of exchanges to be offload onto host memory.

Module parameter ql_dm_tgt_ex_pct was used to control the percentage of
exchanges allocated to the Target side.

With this patch, module parameter ql_dm_tgt_ex_pct is no longer used to
control exchanges for the driver. New module parameter ql2xiniexchg is
added to control exchanges between target mode and initiator mode.

With the updated module parameters, users can control the exact number
of exchanges for either Initiator or Target. The exchange offload
feature will be automatically enabled when the total number of exchanges
exceeds 2048 limit.
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_def.h

@@ -286,7 +286,7 @@ struct name_list_extended {
 #define RESPONSE_ENTRY_CNT_MQ		128	/* Number of response entries.*/
 #define ATIO_ENTRY_CNT_24XX		4096	/* Number of ATIO entries. */
 #define RESPONSE_ENTRY_CNT_FX00		256     /* Number of response entries.*/
-#define EXTENDED_EXCH_ENTRY_CNT		32768   /* Entries for offload case */
+#define FW_DEF_EXCHANGES_CNT 2048
 
 struct req_que;
 struct qla_tgt_sess;
@@ -3593,6 +3593,10 @@ struct qla_hw_data {
 #define IS_SHADOW_REG_CAPABLE(ha)  (IS_QLA27XX(ha))
 #define IS_DPORT_CAPABLE(ha)  (IS_QLA83XX(ha) || IS_QLA27XX(ha))
 #define IS_FAWWN_CAPABLE(ha)	(IS_QLA83XX(ha) || IS_QLA27XX(ha))
+#define IS_EXCHG_OFFLD_CAPABLE(ha) \
+	(IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha))
+#define IS_EXLOGIN_OFFLD_CAPABLE(ha) \
+	(IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha))
 
 	/* HBA serial number */
 	uint8_t		serial0;

drivers/scsi/qla2xxx/qla_gbl.h

@@ -137,6 +137,7 @@ extern int ql2xmdcapmask;
 extern int ql2xmdenable;
 extern int ql2xexlogins;
 extern int ql2xexchoffld;
+extern int ql2xiniexchg;
 extern int ql2xfwholdabts;
 extern int ql2xmvasynctoatio;
 
@@ -839,7 +840,7 @@ extern int qla_get_exlogin_status(scsi_qla_host_t *, uint16_t *,
 	uint16_t *);
 extern int qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr);
 extern int qla_get_exchoffld_status(scsi_qla_host_t *, uint16_t *, uint16_t *);
-extern int qla_set_exchoffld_mem_cfg(scsi_qla_host_t *, dma_addr_t);
+extern int qla_set_exchoffld_mem_cfg(scsi_qla_host_t *);
 extern void qlt_handle_abts_recv(struct scsi_qla_host *, response_t *);
 
 int qla24xx_async_notify_ack(scsi_qla_host_t *, fc_port_t *,

drivers/scsi/qla2xxx/qla_init.c

@@ -2723,7 +2723,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 			if (ql2xexlogins)
 				ha->flags.exlogins_enabled = 1;
 
-			if (ql2xexchoffld)
+			if (qla_is_exch_offld_enabled(vha))
 				ha->flags.exchoffld_enabled = 1;
 
 			rval = qla2x00_execute_fw(vha, srisc_address);

drivers/scsi/qla2xxx/qla_inline.h

@@ -307,3 +307,19 @@ qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t retry_delay)
 		fcport->retry_delay_timestamp = jiffies +
 		    (retry_delay * HZ / 10);
 }
+
+static inline bool
+qla_is_exch_offld_enabled(struct scsi_qla_host *vha)
+{
+	if (qla_ini_mode_enabled(vha) &&
+	    (ql2xiniexchg > FW_DEF_EXCHANGES_CNT))
+		return true;
+	else if (qla_tgt_mode_enabled(vha) &&
+	    (ql2xexchoffld > FW_DEF_EXCHANGES_CNT))
+		return true;
+	else if (qla_dual_mode_enabled(vha) &&
+	    ((ql2xiniexchg + ql2xexchoffld) > FW_DEF_EXCHANGES_CNT))
+		return true;
+	else
+		return false;
+}

drivers/scsi/qla2xxx/qla_mbx.c

@@ -821,7 +821,7 @@ qla_get_exchoffld_status(scsi_qla_host_t *vha, uint16_t *buf_sz,
  */
 #define CONFIG_XCHOFFLD_MEM	0x3
 int
-qla_set_exchoffld_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr)
+qla_set_exchoffld_mem_cfg(scsi_qla_host_t *vha)
 {
 	int		rval;
 	mbx_cmd_t	mc;
@@ -834,12 +834,12 @@ qla_set_exchoffld_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr)
 	memset(mcp->mb, 0 , sizeof(mcp->mb));
 	mcp->mb[0] = MBC_GET_MEM_OFFLOAD_CNTRL_STAT;
 	mcp->mb[1] = CONFIG_XCHOFFLD_MEM;
-	mcp->mb[2] = MSW(phys_addr);
-	mcp->mb[3] = LSW(phys_addr);
-	mcp->mb[6] = MSW(MSD(phys_addr));
-	mcp->mb[7] = LSW(MSD(phys_addr));
-	mcp->mb[8] = MSW(ha->exlogin_size);
-	mcp->mb[9] = LSW(ha->exlogin_size);
+	mcp->mb[2] = MSW(ha->exchoffld_buf_dma);
+	mcp->mb[3] = LSW(ha->exchoffld_buf_dma);
+	mcp->mb[6] = MSW(MSD(ha->exchoffld_buf_dma));
+	mcp->mb[7] = LSW(MSD(ha->exchoffld_buf_dma));
+	mcp->mb[8] = MSW(ha->exchoffld_size);
+	mcp->mb[9] = LSW(ha->exchoffld_size);
 	mcp->out_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_11|MBX_0;
 	mcp->tov = MBX_TOV_SECONDS;

drivers/scsi/qla2xxx/qla_os.c

@@ -224,11 +224,15 @@ MODULE_PARM_DESC(ql2xexlogins,
 		 "Number of extended Logins. "
 		 "0 (Default)- Disabled.");
 
-int ql2xexchoffld = 0;
-module_param(ql2xexchoffld, uint, S_IRUGO|S_IWUSR);
+int ql2xexchoffld = 1024;
+module_param(ql2xexchoffld, uint, 0644);
 MODULE_PARM_DESC(ql2xexchoffld,
-		 "Number of exchanges to offload. "
-		 "0 (Default)- Disabled.");
+	"Number of target exchanges.");
+
+int ql2xiniexchg = 1024;
+module_param(ql2xiniexchg, uint, 0644);
+MODULE_PARM_DESC(ql2xiniexchg,
+	"Number of initiator exchanges.");
 
 int ql2xfwholdabts = 0;
 module_param(ql2xfwholdabts, int, S_IRUGO);
@@ -3986,6 +3990,9 @@ qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha)
 	if (!ql2xexlogins)
 		return QLA_SUCCESS;
 
+	if (!IS_EXLOGIN_OFFLD_CAPABLE(ha))
+		return QLA_SUCCESS;
+
 	ql_log(ql_log_info, vha, 0xd021, "EXLOGIN count: %d.\n", ql2xexlogins);
 	max_cnt = 0;
 	rval = qla_get_exlogin_status(vha, &size, &max_cnt);
@@ -3996,21 +4003,27 @@ qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha)
 	}
 
 	temp = (ql2xexlogins > max_cnt) ? max_cnt : ql2xexlogins;
-	ha->exlogin_size = (size * temp);
-	ql_log(ql_log_info, vha, 0xd024,
-		"EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n",
-		max_cnt, size, temp);
-
-	ql_log(ql_log_info, vha, 0xd025, "EXLOGIN: requested size=0x%x\n",
-		ha->exlogin_size);
-
-	/* Get consistent memory for extended logins */
-	ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev,
-	    ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL);
-	if (!ha->exlogin_buf) {
-		ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a,
+	temp *= size;
+
+	if (temp != ha->exlogin_size) {
+		qla2x00_free_exlogin_buffer(ha);
+		ha->exlogin_size = temp;
+
+		ql_log(ql_log_info, vha, 0xd024,
+		    "EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n",
+		    max_cnt, size, temp);
+
+		ql_log(ql_log_info, vha, 0xd025,
+		    "EXLOGIN: requested size=0x%x\n", ha->exlogin_size);
+
+		/* Get consistent memory for extended logins */
+		ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev,
+			ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL);
+		if (!ha->exlogin_buf) {
+			ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a,
 		    "Failed to allocate memory for exlogin_buf_dma.\n");
-		return -ENOMEM;
+			return -ENOMEM;
+		}
 	}
 
 	/* Now configure the dma buffer */
@@ -4041,15 +4054,49 @@ qla2x00_free_exlogin_buffer(struct qla_hw_data *ha)
 	}
 }
 
+static void
+qla2x00_number_of_exch(scsi_qla_host_t *vha, u32 *ret_cnt, u16 max_cnt)
+{
+	u32 temp;
+	*ret_cnt = FW_DEF_EXCHANGES_CNT;
+
+	if (qla_ini_mode_enabled(vha)) {
+		if (ql2xiniexchg > max_cnt)
+			ql2xiniexchg = max_cnt;
+
+		if (ql2xiniexchg > FW_DEF_EXCHANGES_CNT)
+			*ret_cnt = ql2xiniexchg;
+	} else if (qla_tgt_mode_enabled(vha)) {
+		if (ql2xexchoffld > max_cnt)
+			ql2xexchoffld = max_cnt;
+
+		if (ql2xexchoffld > FW_DEF_EXCHANGES_CNT)
+			*ret_cnt = ql2xexchoffld;
+	} else if (qla_dual_mode_enabled(vha)) {
+		temp = ql2xiniexchg + ql2xexchoffld;
+		if (temp > max_cnt) {
+			ql2xiniexchg -= (temp - max_cnt)/2;
+			ql2xexchoffld -= (((temp - max_cnt)/2) + 1);
+			temp = max_cnt;
+		}
+
+		if (temp > FW_DEF_EXCHANGES_CNT)
+			*ret_cnt = temp;
+	}
+}
+
 int
 qla2x00_set_exchoffld_buffer(scsi_qla_host_t *vha)
 {
 	int rval;
-	uint16_t	size, max_cnt, temp;
+	u16 size, max_cnt;
+	u32 temp;
 	struct qla_hw_data *ha = vha->hw;
 
-	/* Return if we don't need to alloacate any extended logins */
-	if (!ql2xexchoffld)
+	if (!ha->flags.exchoffld_enabled)
+		return QLA_SUCCESS;
+
+	if (!IS_EXCHG_OFFLD_CAPABLE(ha))
 		return QLA_SUCCESS;
 
 	ql_log(ql_log_info, vha, 0xd014,
@@ -4063,30 +4110,45 @@ qla2x00_set_exchoffld_buffer(scsi_qla_host_t *vha)
 		return rval;
 	}
 
-	temp = (ql2xexchoffld > max_cnt) ? max_cnt : ql2xexchoffld;
-	ha->exchoffld_size = (size * temp);
-	ql_log(ql_log_info, vha, 0xd016,
-		"Exchange offload: max_count=%d, buffers=0x%x, total=%d.\n",
-		max_cnt, size, temp);
+	qla2x00_number_of_exch(vha, &temp, max_cnt);
+	temp *= size;
 
-	ql_log(ql_log_info, vha, 0xd017,
-	    "Exchange Buffers requested size = 0x%x\n", ha->exchoffld_size);
-
-	/* Get consistent memory for extended logins */
-	ha->exchoffld_buf = dma_alloc_coherent(&ha->pdev->dev,
-	    ha->exchoffld_size, &ha->exchoffld_buf_dma, GFP_KERNEL);
-	if (!ha->exchoffld_buf) {
-		ql_log_pci(ql_log_fatal, ha->pdev, 0xd013,
-		    "Failed to allocate memory for exchoffld_buf_dma.\n");
-		return -ENOMEM;
+	if (temp != ha->exchoffld_size) {
+		qla2x00_free_exchoffld_buffer(ha);
+		ha->exchoffld_size = temp;
+
+		ql_log(ql_log_info, vha, 0xd016,
+		    "Exchange offload: max_count=%d, buffers=0x%x, total=%d.\n",
+		    max_cnt, size, temp);
+
+		ql_log(ql_log_info, vha, 0xd017,
+		    "Exchange Buffers requested size = 0x%x\n",
+		    ha->exchoffld_size);
+
+		/* Get consistent memory for extended logins */
+		ha->exchoffld_buf = dma_alloc_coherent(&ha->pdev->dev,
+			ha->exchoffld_size, &ha->exchoffld_buf_dma, GFP_KERNEL);
+		if (!ha->exchoffld_buf) {
+			ql_log_pci(ql_log_fatal, ha->pdev, 0xd013,
+			"Failed to allocate memory for exchoffld_buf_dma.\n");
+			return -ENOMEM;
+		}
 	}
 
 	/* Now configure the dma buffer */
-	rval = qla_set_exchoffld_mem_cfg(vha, ha->exchoffld_buf_dma);
+	rval = qla_set_exchoffld_mem_cfg(vha);
 	if (rval) {
 		ql_log(ql_log_fatal, vha, 0xd02e,
 		    "Setup exchange offload buffer ****FAILED****.\n");
 		qla2x00_free_exchoffld_buffer(ha);
+	} else {
+		/* re-adjust number of target exchange */
+		struct init_cb_81xx *icb = (struct init_cb_81xx *)ha->init_cb;
+
+		if (qla_ini_mode_enabled(vha))
+			icb->exchange_count = 0;
+		else
+			icb->exchange_count = cpu_to_le16(ql2xexchoffld);
 	}
 
 	return rval;

drivers/scsi/qla2xxx/qla_target.c

@@ -59,7 +59,7 @@ MODULE_PARM_DESC(qlini_mode,
 	"when ready "
 	"\"enabled\" (default) - initiator mode will always stay enabled.");
 
-static int ql_dm_tgt_ex_pct = 50;
+static int ql_dm_tgt_ex_pct = 0;
 module_param(ql_dm_tgt_ex_pct, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql_dm_tgt_ex_pct,
 	"For Dual Mode (qlini_mode=dual), this parameter determines "
@@ -6438,8 +6438,9 @@ void
 qlt_24xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_24xx *nv)
 {
 	struct qla_hw_data *ha = vha->hw;
-	u32 tmp;
-	u16 t;
+
+	if (!QLA_TGT_MODE_ENABLED())
+		return;
 
 	if (qla_tgt_mode_enabled(vha) || qla_dual_mode_enabled(vha)) {
 		if (!ha->tgt.saved_set) {
@@ -6454,24 +6455,10 @@ qlt_24xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_24xx *nv)
 			ha->tgt.saved_set = 1;
 		}
 
-		if (qla_tgt_mode_enabled(vha)) {
+		if (qla_tgt_mode_enabled(vha))
 			nv->exchange_count = cpu_to_le16(0xFFFF);
-		} else {			/* dual */
-			if (ql_dm_tgt_ex_pct > 100) {
-				ql_dm_tgt_ex_pct = 50;
-			} else if (ql_dm_tgt_ex_pct == 100) {
-				/* leave some for FW */
-				ql_dm_tgt_ex_pct = 95;
-			}
-
-			tmp = ha->orig_fw_xcb_count * ql_dm_tgt_ex_pct;
-			tmp = tmp/100;
-			if (tmp > 0xffff)
-				tmp = 0xffff;
-
-			t = tmp & 0xffff;
-			nv->exchange_count = cpu_to_le16(t);
-		}
+		else			/* dual */
+			nv->exchange_count = cpu_to_le16(ql2xexchoffld);
 
 		/* Enable target mode */
 		nv->firmware_options_1 |= cpu_to_le32(BIT_4);
@@ -6556,8 +6543,6 @@ void
 qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv)
 {
 	struct qla_hw_data *ha = vha->hw;
-	u32 tmp;
-	u16 t;
 
 	if (!QLA_TGT_MODE_ENABLED())
 		return;
@@ -6575,23 +6560,10 @@ qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv)
 			ha->tgt.saved_set = 1;
 		}
 
-		if (qla_tgt_mode_enabled(vha)) {
+		if (qla_tgt_mode_enabled(vha))
 			nv->exchange_count = cpu_to_le16(0xFFFF);
-		} else {			/* dual */
-			if (ql_dm_tgt_ex_pct > 100) {
-				ql_dm_tgt_ex_pct = 50;
-			} else if (ql_dm_tgt_ex_pct == 100) {
-				/* leave some for FW */
-				ql_dm_tgt_ex_pct = 95;
-			}
-
-			tmp = ha->orig_fw_xcb_count * ql_dm_tgt_ex_pct;
-			tmp = tmp/100;
-			if (tmp > 0xffff)
-				tmp = 0xffff;
-			t = tmp & 0xffff;
-			nv->exchange_count = cpu_to_le16(t);
-		}
+		else			/* dual */
+			nv->exchange_count = cpu_to_le16(ql2xexchoffld);
 
 		/* Enable target mode */
 		nv->firmware_options_1 |= cpu_to_le32(BIT_4);