Commit 9a618e6f authored by 周琰杰 (Zhou Yanjie)'s avatar 周琰杰 (Zhou Yanjie) Committed by Stephen Boyd

dt-bindings: clock: Add X1830 clock bindings.

Add the clock bindings for the X1830 Soc from Ingenic.
Signed-off-by: default avatar周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200528031549.13846-5-zhouyanjie@wanyeetech.comSigned-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent 9d9cc58a
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides clock numbers for the ingenic,x1830-cgu DT binding.
*
* They are roughly ordered as:
* - external clocks
* - PLLs
* - muxes/dividers in the order they appear in the x1830 programmers manual
* - gates in order of their bit in the CLKGR* registers
*/
#ifndef __DT_BINDINGS_CLOCK_X1830_CGU_H__
#define __DT_BINDINGS_CLOCK_X1830_CGU_H__
#define X1830_CLK_EXCLK 0
#define X1830_CLK_RTCLK 1
#define X1830_CLK_APLL 2
#define X1830_CLK_MPLL 3
#define X1830_CLK_EPLL 4
#define X1830_CLK_VPLL 5
#define X1830_CLK_OTGPHY 6
#define X1830_CLK_SCLKA 7
#define X1830_CLK_CPUMUX 8
#define X1830_CLK_CPU 9
#define X1830_CLK_L2CACHE 10
#define X1830_CLK_AHB0 11
#define X1830_CLK_AHB2PMUX 12
#define X1830_CLK_AHB2 13
#define X1830_CLK_PCLK 14
#define X1830_CLK_DDR 15
#define X1830_CLK_MAC 16
#define X1830_CLK_LCD 17
#define X1830_CLK_MSCMUX 18
#define X1830_CLK_MSC0 19
#define X1830_CLK_MSC1 20
#define X1830_CLK_SSIPLL 21
#define X1830_CLK_SSIPLL_DIV2 22
#define X1830_CLK_SSIMUX 23
#define X1830_CLK_EMC 24
#define X1830_CLK_EFUSE 25
#define X1830_CLK_OTG 26
#define X1830_CLK_SSI0 27
#define X1830_CLK_SMB0 28
#define X1830_CLK_SMB1 29
#define X1830_CLK_SMB2 30
#define X1830_CLK_UART0 31
#define X1830_CLK_UART1 32
#define X1830_CLK_SSI1 33
#define X1830_CLK_SFC 34
#define X1830_CLK_PDMA 35
#define X1830_CLK_TCU 36
#define X1830_CLK_DTRNG 37
#define X1830_CLK_OST 38
#endif /* __DT_BINDINGS_CLOCK_X1830_CGU_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment