Commit 9a63bd6f authored by Tomi Valkeinen's avatar Tomi Valkeinen Committed by Andrzej Hajda

drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value

Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.

This patch changes the configuration as follows:

Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.

DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
parent 4d9d54a7
...@@ -836,12 +836,11 @@ static int tc_main_link_setup(struct tc_data *tc) ...@@ -836,12 +836,11 @@ static int tc_main_link_setup(struct tc_data *tc)
if (!tc->mode) if (!tc->mode)
return -EINVAL; return -EINVAL;
/* from excel file - DP0_SrcCtrl */ tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B | /* SSCG and BW27 on DP1 must be set to the same as on DP0 */
DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 | tc_write(DP1_SRCCTRL,
DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT); (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
/* from excel file - DP1_SrcCtrl */ ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
tc_write(DP1_SRCCTRL, 0x00003083);
rate = clk_get_rate(tc->refclk); rate = clk_get_rate(tc->refclk);
switch (rate) { switch (rate) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment