Commit 9ab2393f authored by Michael Krufky's avatar Michael Krufky Committed by Mauro Carvalho Chehab

[media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5

The D1F5 revision of the WinTV HVR-1900 uses a tda18271c2 tuner
instead of a tda18271c1 tuner as used in revision D1E9. To
account for this, we must hardcode the frontend configuration
to use the same IF frequency configuration for both revisions
of the device.

6MHz DVB-T is unaffected by this issue, as the recommended
IF Frequency configuration for 6MHz DVB-T is the same on both
c1 and c2 revisions of the tda18271 tuner.
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Cc: Mike Isely <isely@pobox.com>
Cc: stable@kernel.org
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 3be5bb71
...@@ -320,7 +320,17 @@ static struct tda829x_config tda829x_no_probe = { ...@@ -320,7 +320,17 @@ static struct tda829x_config tda829x_no_probe = {
.probe_tuner = TDA829X_DONT_PROBE, .probe_tuner = TDA829X_DONT_PROBE,
}; };
static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = {
.dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
.if_lvl = 1, .rfagc_top = 0x37, },
.dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
.if_lvl = 1, .rfagc_top = 0x37, },
.dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
.if_lvl = 1, .rfagc_top = 0x37, },
};
static struct tda18271_config hauppauge_tda18271_dvb_config = { static struct tda18271_config hauppauge_tda18271_dvb_config = {
.std_map = &hauppauge_tda18271_dvbt_std_map,
.gate = TDA18271_GATE_ANALOG, .gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF, .output_opt = TDA18271_OUTPUT_LT_OFF,
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment