Commit 9ac7b1a3 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Dmitry Torokhov

Input: tl6040-vibra - Device Tree support

Enable DT based probing of the vibra driver.

Example of dts section to load the twl6040-vibra driver:
twl6040: twl6040@4b {
	...
	twl6040_vibra: twl6040@1 {
		compatible = "ti,twl6040-vibra";
		interrupts = <4>;
		vddvibl-supply = <&vbat>;
		vddvibr-supply = <&vbat>;
		vibldrv_res = <8>;
		vibrdrv_res = <3>;
		viblmotor_res = <10>;
		vibrmotor_res = <10>;
	};
};

[Sasha Levin <levinsasha928@gmail.com>: fixed build error]
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 2872a9b5
Vibra driver for the twl6040 family
The vibra driver is a child of the twl6040 MFD dirver.
Documentation/devicetree/bindings/mfd/twl6040.txt
Required properties:
- compatible : Must be "ti,twl6040-vibra";
- interrupts: 4, Vibra overcurrent interrupt
- vddvibl-supply: Regulator supplying the left vibra motor
- vddvibr-supply: Regulator supplying the right vibra motor
- vibldrv_res: Board specific left driver resistance
- vibrdrv_res: Board specific right driver resistance
- viblmotor_res: Board specific left motor resistance
- vibrmotor_res: Board specific right motor resistance
Optional properties:
- vddvibl_uV: If the vddvibl default voltage need to be changed
- vddvibr_uV: If the vddvibr default voltage need to be changed
Example:
/*
* 8-channel high quality low-power audio codec
* http://www.ti.com/lit/ds/symlink/twl6040.pdf
*/
twl6040: twl6040@4b {
...
twl6040_vibra: twl6040@1 {
compatible = "ti,twl6040-vibra";
interrupts = <4>;
vddvibl-supply = <&vbat>;
vddvibr-supply = <&vbat>;
vibldrv_res = <8>;
vibrdrv_res = <3>;
viblmotor_res = <10>;
vibrmotor_res = <10>;
};
};
......@@ -27,6 +27,7 @@
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/workqueue.h>
#include <linux/input.h>
#include <linux/mfd/twl6040.h>
......@@ -258,10 +259,13 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
{
struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
struct device_node *node = pdev->dev.of_node;
struct vibra_info *info;
int vddvibl_uV = 0;
int vddvibr_uV = 0;
int ret;
if (!pdata) {
if (!pdata && !node) {
dev_err(&pdev->dev, "platform_data not available\n");
return -EINVAL;
}
......@@ -273,11 +277,26 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
}
info->dev = &pdev->dev;
info->twl6040 = dev_get_drvdata(pdev->dev.parent);
info->vibldrv_res = pdata->vibldrv_res;
info->vibrdrv_res = pdata->vibrdrv_res;
info->viblmotor_res = pdata->viblmotor_res;
info->vibrmotor_res = pdata->vibrmotor_res;
if (pdata) {
info->vibldrv_res = pdata->vibldrv_res;
info->vibrdrv_res = pdata->vibrdrv_res;
info->viblmotor_res = pdata->viblmotor_res;
info->vibrmotor_res = pdata->vibrmotor_res;
vddvibl_uV = pdata->vddvibl_uV;
vddvibr_uV = pdata->vddvibr_uV;
} else {
of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res);
of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res);
of_property_read_u32(node, "viblmotor_res",
&info->viblmotor_res);
of_property_read_u32(node, "vibrmotor_res",
&info->vibrmotor_res);
of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV);
of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV);
}
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
dev_err(info->dev, "invalid vibra driver/motor resistance\n");
......@@ -339,10 +358,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
goto err_regulator;
}
if (pdata->vddvibl_uV) {
if (vddvibl_uV) {
ret = regulator_set_voltage(info->supplies[0].consumer,
pdata->vddvibl_uV,
pdata->vddvibl_uV);
vddvibl_uV, vddvibl_uV);
if (ret) {
dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
ret);
......@@ -350,10 +368,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
}
}
if (pdata->vddvibr_uV) {
if (vddvibr_uV) {
ret = regulator_set_voltage(info->supplies[1].consumer,
pdata->vddvibr_uV,
pdata->vddvibr_uV);
vddvibr_uV, vddvibr_uV);
if (ret) {
dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
ret);
......@@ -401,6 +418,12 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id twl6040_vibra_of_match[] = {
{.compatible = "ti,twl6040-vibra", },
{ },
};
MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match);
static struct platform_driver twl6040_vibra_driver = {
.probe = twl6040_vibra_probe,
.remove = __devexit_p(twl6040_vibra_remove),
......@@ -408,6 +431,7 @@ static struct platform_driver twl6040_vibra_driver = {
.name = "twl6040-vibra",
.owner = THIS_MODULE,
.pm = &twl6040_vibra_pm_ops,
.of_match_table = twl6040_vibra_of_match,
},
};
module_platform_driver(twl6040_vibra_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment