Commit 9ac98284 authored by Jesse Brandeburg's avatar Jesse Brandeburg Committed by Jeff Garzik

e1000: add dynamic generic MSI interrupt routine

Add a generic MSI interrupt routine that is IO read-free, speeding up
MSI interrupt handling.
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
parent 04fedbfb
......@@ -157,6 +157,9 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
static irqreturn_t e1000_intr(int irq, void *data);
#ifdef CONFIG_PCI_MSI
static irqreturn_t e1000_intr_msi(int irq, void *data);
#endif
static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring);
#ifdef CONFIG_E1000_NAPI
......@@ -288,7 +291,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
flags = IRQF_SHARED;
#ifdef CONFIG_PCI_MSI
if (adapter->hw.mac_type > e1000_82547_rev_2) {
if (adapter->hw.mac_type >= e1000_82571) {
adapter->have_msi = TRUE;
if ((err = pci_enable_msi(adapter->pdev))) {
DPRINTK(PROBE, ERR,
......@@ -296,8 +299,14 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
adapter->have_msi = FALSE;
}
}
if (adapter->have_msi)
if (adapter->have_msi) {
flags &= ~IRQF_SHARED;
err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
netdev->name, netdev);
if (err)
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
} else
#endif
if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
netdev->name, netdev)))
......@@ -3466,6 +3475,83 @@ e1000_update_stats(struct e1000_adapter *adapter)
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
#ifdef CONFIG_PCI_MSI
/**
* e1000_intr_msi - Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
**/
static
irqreturn_t e1000_intr_msi(int irq, void *data)
{
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
#ifndef CONFIG_E1000_NAPI
int i;
#endif
/* this code avoids the read of ICR but has to get 1000 interrupts
* at every link change event before it will notice the change */
if (++adapter->detect_link >= 1000) {
uint32_t icr = E1000_READ_REG(hw, ICR);
#ifdef CONFIG_E1000_NAPI
/* read ICR disables interrupts using IAM, so keep up with our
* enable/disable accounting */
atomic_inc(&adapter->irq_sem);
#endif
adapter->detect_link = 0;
if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) &&
(icr & E1000_ICR_INT_ASSERTED)) {
hw->get_link_status = 1;
/* 80003ES2LAN workaround--
* For packet buffer work-around on link down event;
* disable receives here in the ISR and
* reset adapter in watchdog
*/
if (netif_carrier_ok(netdev) &&
(adapter->hw.mac_type == e1000_80003es2lan)) {
/* disable receives */
uint32_t rctl = E1000_READ_REG(hw, RCTL);
E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
}
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->watchdog_timer,
jiffies + 1);
}
} else {
E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ |
E1000_ICR_LSC)));
/* bummer we have to flush here, but things break otherwise as
* some event appears to be lost or delayed and throughput
* drops. In almost all tests this flush is un-necessary */
E1000_WRITE_FLUSH(hw);
#ifdef CONFIG_E1000_NAPI
/* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are
* masked. No need for the IMC write, but it does mean we
* should account for it ASAP. */
atomic_inc(&adapter->irq_sem);
#endif
}
#ifdef CONFIG_E1000_NAPI
if (likely(netif_rx_schedule_prep(netdev)))
__netif_rx_schedule(netdev);
else
e1000_irq_enable(adapter);
#else
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
!e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
#endif
return IRQ_HANDLED;
}
#endif
/**
* e1000_intr - Interrupt Handler
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment