Commit 9ad27643 authored by Dhananjay Phadke's avatar Dhananjay Phadke Committed by Jeff Garzik

netxen: fix promisc mode, mtu setting

For NX3031, multicast filtering, promisc mode, and max frame size
setting is handled by firmware, driver needs to send request to
enable/disable it.

For old chip revisions / firmware, driver still sets it directly.

Added function pointer to set mtu according to chip revision.
Signed-off-by: default avatarDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 83821a07
......@@ -1172,6 +1172,36 @@ typedef struct {
nx_nic_intr_coalesce_data_t irq;
} nx_nic_intr_coalesce_t;
#define NX_HOST_REQUEST 0x13
#define NX_NIC_REQUEST 0x14
#define NX_MAC_EVENT 0x1
enum {
NX_NIC_H2C_OPCODE_START = 0,
NX_NIC_H2C_OPCODE_CONFIG_RSS,
NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL,
NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE,
NX_NIC_H2C_OPCODE_CONFIG_LED,
NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS,
NX_NIC_H2C_OPCODE_CONFIG_L2_MAC,
NX_NIC_H2C_OPCODE_LRO_REQUEST,
NX_NIC_H2C_OPCODE_GET_SNMP_STATS,
NX_NIC_H2C_OPCODE_PROXY_START_REQUEST,
NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST,
NX_NIC_H2C_OPCODE_PROXY_SET_MTU,
NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE,
NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST,
NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST,
NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST,
NX_NIC_H2C_OPCODE_GET_NET_STATS,
NX_NIC_H2C_OPCODE_LAST
};
#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */
#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */
#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
typedef struct {
u64 qhdr;
u64 req_hdr;
......@@ -1290,7 +1320,7 @@ struct netxen_adapter {
int (*disable_phy_interrupts) (struct netxen_adapter *);
int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t);
int (*set_mtu) (struct netxen_adapter *, int);
int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t);
int (*set_promisc) (struct netxen_adapter *, u32);
int (*phy_read) (struct netxen_adapter *, long reg, u32 *);
int (*phy_write) (struct netxen_adapter *, long reg, u32 val);
int (*init_port) (struct netxen_adapter *, int);
......@@ -1467,9 +1497,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter);
u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
void netxen_p2_nic_set_multi(struct net_device *netdev);
void netxen_p3_nic_set_multi(struct net_device *netdev);
int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu);
int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
int netxen_nic_set_mac(struct net_device *netdev, void *p);
......
......@@ -145,8 +145,8 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
return rcode;
}
u32
nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
int
nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu)
{
u32 rcode = NX_RCODE_SUCCESS;
struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0];
......@@ -160,7 +160,10 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu)
0,
NX_CDRP_CMD_SET_MTU);
return rcode;
if (rcode != NX_RCODE_SUCCESS)
return -EIO;
return 0;
}
static int
......
......@@ -285,14 +285,7 @@ static unsigned crb_hub_agt[64] =
#define ADDR_IN_RANGE(addr, low, high) \
(((addr) <= (high)) && ((addr) >= (low)))
#define NETXEN_MAX_MTU 8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE
#define NETXEN_MIN_MTU 64
#define NETXEN_ETH_FCS_SIZE 4
#define NETXEN_ENET_HEADER_SIZE 14
#define NETXEN_WINDOW_ONE 0x2000000 /*CRB Window: bit 25 of CRB address */
#define NETXEN_FIRMWARE_LEN ((16 * 1024) / 4)
#define NETXEN_NIU_HDRSIZE (0x1 << 6)
#define NETXEN_NIU_TLRSIZE (0x1 << 5)
#define NETXEN_NIC_ZERO_PAUSE_ADDR 0ULL
#define NETXEN_NIC_UNIT_PAUSE_ADDR 0x200ULL
......@@ -541,9 +534,6 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
return 0;
}
#define NIC_REQUEST 0x14
#define NETXEN_MAC_EVENT 0x1
static int nx_p3_sre_macaddr_change(struct net_device *dev,
u8 *addr, unsigned op)
{
......@@ -553,8 +543,8 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
int rv;
memset(&req, 0, sizeof(nx_nic_req_t));
req.qhdr |= (NIC_REQUEST << 23);
req.req_hdr |= NETXEN_MAC_EVENT;
req.qhdr |= (NX_NIC_REQUEST << 23);
req.req_hdr |= NX_MAC_EVENT;
req.req_hdr |= ((u64)adapter->portnum << 16);
mac_req.op = op;
memcpy(&mac_req.mac_addr, addr, 6);
......@@ -575,31 +565,35 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
nx_mac_list_t *cur, *next, *del_list, *add_list = NULL;
struct dev_mc_list *mc_ptr;
u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE);
/*
* Programming mac addresses will automaticly enabling L2 filtering.
* HW will replace timestamp with L2 conid when L2 filtering is
* enabled. This causes problem for LSA. Do not enabling L2 filtering
* until that problem is fixed.
*/
if ((netdev->flags & IFF_PROMISC) ||
(netdev->mc_count > adapter->max_mc_count))
return;
u32 mode = VPORT_MISS_MODE_DROP;
del_list = adapter->mac_list;
adapter->mac_list = NULL;
nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list);
nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
if (netdev->flags & IFF_PROMISC) {
mode = VPORT_MISS_MODE_ACCEPT_ALL;
goto send_fw_cmd;
}
if ((netdev->flags & IFF_ALLMULTI) ||
(netdev->mc_count > adapter->max_mc_count)) {
mode = VPORT_MISS_MODE_ACCEPT_MULTI;
goto send_fw_cmd;
}
if (netdev->mc_count > 0) {
nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list);
for (mc_ptr = netdev->mc_list; mc_ptr;
mc_ptr = mc_ptr->next) {
nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr,
&add_list, &del_list);
}
}
send_fw_cmd:
adapter->set_promisc(adapter, mode);
for (cur = del_list; cur;) {
nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL);
next = cur->next;
......@@ -615,6 +609,21 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
}
}
int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
{
nx_nic_req_t req;
memset(&req, 0, sizeof(nx_nic_req_t));
req.qhdr |= (NX_HOST_REQUEST << 23);
req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
req.req_hdr |= ((u64)adapter->portnum << 16);
req.words[0] = cpu_to_le64(mode);
return netxen_send_cmd_descs(adapter,
(struct cmd_desc_type0 *)&req, 1);
}
#define NETXEN_CONFIG_INTR_COALESCE 3
/*
......@@ -627,7 +636,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
memset(&req, 0, sizeof(nx_nic_req_t));
req.qhdr |= (NIC_REQUEST << 23);
req.qhdr |= (NX_NIC_REQUEST << 23);
req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
req.req_hdr |= ((u64)adapter->portnum << 16);
......@@ -653,6 +662,7 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
{
struct netxen_adapter *adapter = netdev_priv(netdev);
int max_mtu;
int rc = 0;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
max_mtu = P3_MAX_MTU;
......@@ -666,16 +676,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu)
}
if (adapter->set_mtu)
adapter->set_mtu(adapter, mtu);
netdev->mtu = mtu;
rc = adapter->set_mtu(adapter, mtu);
mtu += MTU_FUDGE_FACTOR;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
nx_fw_cmd_set_mtu(adapter, mtu);
else if (adapter->set_mtu)
adapter->set_mtu(adapter, mtu);
if (!rc)
netdev->mtu = mtu;
return 0;
return rc;
}
int netxen_is_flash_supported(struct netxen_adapter *adapter)
......@@ -2047,6 +2053,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
{
new_mtu += MTU_FUDGE_FACTOR;
netxen_nic_write_w0(adapter,
NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port),
new_mtu);
......@@ -2055,7 +2062,7 @@ int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu)
int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu)
{
new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE;
new_mtu += MTU_FUDGE_FACTOR;
if (adapter->physical_port == 0)
netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE,
new_mtu);
......
......@@ -419,12 +419,9 @@ typedef enum {
#define netxen_get_niu_enable_ge(config_word) \
_netxen_crb_get_bit(config_word, 1)
/* Promiscous mode options (GbE mode only) */
typedef enum {
NETXEN_NIU_PROMISC_MODE = 0,
NETXEN_NIU_NON_PROMISC_MODE,
NETXEN_NIU_ALLMULTI_MODE
} netxen_niu_prom_mode_t;
#define NETXEN_NIU_NON_PROMISC_MODE 0
#define NETXEN_NIU_PROMISC_MODE 1
#define NETXEN_NIU_ALLMULTI_MODE 2
/*
* NIU GB Drop CRC Register
......@@ -471,9 +468,9 @@ typedef enum {
/* Set promiscuous mode for a GbE interface */
int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
netxen_niu_prom_mode_t mode);
u32 mode);
int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
netxen_niu_prom_mode_t mode);
u32 mode);
/* set the MAC address for a given MAC */
int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
......
......@@ -364,6 +364,11 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
default:
break;
}
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
adapter->set_mtu = nx_fw_cmd_set_mtu;
adapter->set_promisc = netxen_p3_nic_set_promisc;
}
}
/*
......
......@@ -1113,9 +1113,7 @@ static int netxen_nic_open(struct net_device *netdev)
netxen_nic_set_link_parameters(adapter);
netdev->set_multicast_list(netdev);
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
nx_fw_cmd_set_mtu(adapter, netdev->mtu);
else
if (adapter->set_mtu)
adapter->set_mtu(adapter, netdev->mtu);
mod_timer(&adapter->watchdog_timer, jiffies);
......
......@@ -764,7 +764,7 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
/* Set promiscuous mode for a GbE interface */
int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
netxen_niu_prom_mode_t mode)
u32 mode)
{
__u32 reg;
u32 port = adapter->physical_port;
......@@ -906,7 +906,7 @@ int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter,
#endif /* 0 */
int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
netxen_niu_prom_mode_t mode)
u32 mode)
{
__u32 reg;
u32 port = adapter->physical_port;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment