Commit 9aea151f authored by Linus Walleij's avatar Linus Walleij Committed by Olof Johansson

ARM: dts: add the AB8500 clocks to the device tree

This adds the AB8500 clocks to the device tree using the new
bindings from the clk subsystem, making audio work again.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 4495c08e
......@@ -14,6 +14,7 @@
#include <dt-bindings/mfd/dbx500-prcmu.h>
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ste-ab8500.h>
#include "skeleton.dtsi"
/ {
......@@ -603,6 +604,11 @@ ab8500 {
interrupt-controller;
#interrupt-cells = <2>;
ab8500_clock: clock-controller {
compatible = "stericsson,ab8500-clk";
#clock-cells = <1>;
};
ab8500_gpio: ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
gpio-controller;
......@@ -686,6 +692,8 @@ ab8500-sysctrl {
ab8500-pwm {
compatible = "stericsson,ab8500-pwm";
clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
clock-names = "intclk";
};
ab8500-debugfs {
......@@ -700,6 +708,9 @@ codec: ab8500-codec {
V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
clock-names = "audioclk";
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
......@@ -1095,6 +1106,14 @@ sdi5_per3@80008000 {
status = "disabled";
};
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
clock-names = "sysclk", "ulpclk", "intclk";
};
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
......
......@@ -186,15 +186,6 @@ sdi4_per2@80114000 {
status = "okay";
};
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
clocks = <&prcmu_clk PRCMU_SYSCLK>;
clock-names = "sysclk";
};
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
......
......@@ -159,15 +159,6 @@ gpio@8011e080 {
"", "", "", "", "", "", "", "";
};
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
clocks = <&prcmu_clk PRCMU_SYSCLK>;
clock-names = "sysclk";
};
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment