Commit 9b127573 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'tegra-for-5.8-cpufreq' of...

Merge tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

cpufreq: Changes for v5.8-rc1

This change move Tegra20 and Tegra30 to the generic DT CPU frequency
scaling driver.

* tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)

Link: https://lore.kernel.org/r/20200515145311.1580134-2-thierry.reding@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 84684272 9ce27463
......@@ -295,11 +295,11 @@ config ARM_TANGO_CPUFREQ
default y
config ARM_TEGRA20_CPUFREQ
tristate "Tegra20 CPUFreq support"
depends on ARCH_TEGRA
tristate "Tegra20/30 CPUFreq support"
depends on ARCH_TEGRA && CPUFREQ_DT
default y
help
This adds the CPUFreq driver support for Tegra20 SOCs.
This adds the CPUFreq driver support for Tegra20/30 SOCs.
config ARM_TEGRA124_CPUFREQ
bool "Tegra124 CPUFreq support"
......
......@@ -7,201 +7,96 @@
* Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation
*/
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/bits.h>
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/types.h>
static struct cpufreq_frequency_table freq_table[] = {
{ .frequency = 216000 },
{ .frequency = 312000 },
{ .frequency = 456000 },
{ .frequency = 608000 },
{ .frequency = 760000 },
{ .frequency = 816000 },
{ .frequency = 912000 },
{ .frequency = 1000000 },
{ .frequency = CPUFREQ_TABLE_END },
};
struct tegra20_cpufreq {
struct device *dev;
struct cpufreq_driver driver;
struct clk *cpu_clk;
struct clk *pll_x_clk;
struct clk *pll_p_clk;
bool pll_x_prepared;
};
#include <soc/tegra/common.h>
#include <soc/tegra/fuse.h>
static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
unsigned int index)
static bool cpu0_node_has_opp_v2_prop(void)
{
struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
unsigned int ifreq = clk_get_rate(cpufreq->pll_p_clk) / 1000;
/*
* Don't switch to intermediate freq if:
* - we are already at it, i.e. policy->cur == ifreq
* - index corresponds to ifreq
*/
if (freq_table[index].frequency == ifreq || policy->cur == ifreq)
return 0;
return ifreq;
}
struct device_node *np = of_cpu_device_node_get(0);
bool ret = false;
static int tegra_target_intermediate(struct cpufreq_policy *policy,
unsigned int index)
{
struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
int ret;
/*
* Take an extra reference to the main pll so it doesn't turn
* off when we move the cpu off of it as enabling it again while we
* switch to it from tegra_target() would take additional time.
*
* When target-freq is equal to intermediate freq we don't need to
* switch to an intermediate freq and so this routine isn't called.
* Also, we wouldn't be using pll_x anymore and must not take extra
* reference to it, as it can be disabled now to save some power.
*/
clk_prepare_enable(cpufreq->pll_x_clk);
ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
if (ret)
clk_disable_unprepare(cpufreq->pll_x_clk);
else
cpufreq->pll_x_prepared = true;
if (of_get_property(np, "operating-points-v2", NULL))
ret = true;
of_node_put(np);
return ret;
}
static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
{
struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
unsigned long rate = freq_table[index].frequency;
unsigned int ifreq = clk_get_rate(cpufreq->pll_p_clk) / 1000;
int ret;
/*
* target freq == pll_p, don't need to take extra reference to pll_x_clk
* as it isn't used anymore.
*/
if (rate == ifreq)
return clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
ret = clk_set_rate(cpufreq->pll_x_clk, rate * 1000);
/* Restore to earlier frequency on error, i.e. pll_x */
if (ret)
dev_err(cpufreq->dev, "Failed to change pll_x to %lu\n", rate);
ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_x_clk);
/* This shouldn't fail while changing or restoring */
WARN_ON(ret);
/*
* Drop count to pll_x clock only if we switched to intermediate freq
* earlier while transitioning to a target frequency.
*/
if (cpufreq->pll_x_prepared) {
clk_disable_unprepare(cpufreq->pll_x_clk);
cpufreq->pll_x_prepared = false;
}
return ret;
}
static int tegra_cpu_init(struct cpufreq_policy *policy)
{
struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
clk_prepare_enable(cpufreq->cpu_clk);
/* FIXME: what's the actual transition time? */
cpufreq_generic_init(policy, freq_table, 300 * 1000);
policy->clk = cpufreq->cpu_clk;
policy->suspend_freq = freq_table[0].frequency;
return 0;
}
static int tegra_cpu_exit(struct cpufreq_policy *policy)
{
struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
clk_disable_unprepare(cpufreq->cpu_clk);
return 0;
}
static int tegra20_cpufreq_probe(struct platform_device *pdev)
{
struct tegra20_cpufreq *cpufreq;
struct platform_device *cpufreq_dt;
struct opp_table *opp_table;
struct device *cpu_dev;
u32 versions[2];
int err;
cpufreq = devm_kzalloc(&pdev->dev, sizeof(*cpufreq), GFP_KERNEL);
if (!cpufreq)
return -ENOMEM;
if (!cpu0_node_has_opp_v2_prop()) {
dev_err(&pdev->dev, "operating points not found\n");
dev_err(&pdev->dev, "please update your device tree\n");
return -ENODEV;
}
if (of_machine_is_compatible("nvidia,tegra20")) {
versions[0] = BIT(tegra_sku_info.cpu_process_id);
versions[1] = BIT(tegra_sku_info.soc_speedo_id);
} else {
versions[0] = BIT(tegra_sku_info.cpu_process_id);
versions[1] = BIT(tegra_sku_info.cpu_speedo_id);
}
dev_info(&pdev->dev, "hardware version 0x%x 0x%x\n",
versions[0], versions[1]);
cpufreq->cpu_clk = clk_get_sys(NULL, "cclk");
if (IS_ERR(cpufreq->cpu_clk))
return PTR_ERR(cpufreq->cpu_clk);
cpu_dev = get_cpu_device(0);
if (WARN_ON(!cpu_dev))
return -ENODEV;
cpufreq->pll_x_clk = clk_get_sys(NULL, "pll_x");
if (IS_ERR(cpufreq->pll_x_clk)) {
err = PTR_ERR(cpufreq->pll_x_clk);
goto put_cpu;
opp_table = dev_pm_opp_set_supported_hw(cpu_dev, versions, 2);
err = PTR_ERR_OR_ZERO(opp_table);
if (err) {
dev_err(&pdev->dev, "failed to set supported hw: %d\n", err);
return err;
}
cpufreq->pll_p_clk = clk_get_sys(NULL, "pll_p");
if (IS_ERR(cpufreq->pll_p_clk)) {
err = PTR_ERR(cpufreq->pll_p_clk);
goto put_pll_x;
cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
err = PTR_ERR_OR_ZERO(cpufreq_dt);
if (err) {
dev_err(&pdev->dev,
"failed to create cpufreq-dt device: %d\n", err);
goto err_put_supported_hw;
}
cpufreq->dev = &pdev->dev;
cpufreq->driver.get = cpufreq_generic_get;
cpufreq->driver.attr = cpufreq_generic_attr;
cpufreq->driver.init = tegra_cpu_init;
cpufreq->driver.exit = tegra_cpu_exit;
cpufreq->driver.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK;
cpufreq->driver.verify = cpufreq_generic_frequency_table_verify;
cpufreq->driver.suspend = cpufreq_generic_suspend;
cpufreq->driver.driver_data = cpufreq;
cpufreq->driver.target_index = tegra_target;
cpufreq->driver.get_intermediate = tegra_get_intermediate;
cpufreq->driver.target_intermediate = tegra_target_intermediate;
snprintf(cpufreq->driver.name, CPUFREQ_NAME_LEN, "tegra");
err = cpufreq_register_driver(&cpufreq->driver);
if (err)
goto put_pll_p;
platform_set_drvdata(pdev, cpufreq);
platform_set_drvdata(pdev, cpufreq_dt);
return 0;
put_pll_p:
clk_put(cpufreq->pll_p_clk);
put_pll_x:
clk_put(cpufreq->pll_x_clk);
put_cpu:
clk_put(cpufreq->cpu_clk);
err_put_supported_hw:
dev_pm_opp_put_supported_hw(opp_table);
return err;
}
static int tegra20_cpufreq_remove(struct platform_device *pdev)
{
struct tegra20_cpufreq *cpufreq = platform_get_drvdata(pdev);
struct platform_device *cpufreq_dt;
struct opp_table *opp_table;
cpufreq_unregister_driver(&cpufreq->driver);
cpufreq_dt = platform_get_drvdata(pdev);
platform_device_unregister(cpufreq_dt);
clk_put(cpufreq->pll_p_clk);
clk_put(cpufreq->pll_x_clk);
clk_put(cpufreq->cpu_clk);
opp_table = dev_pm_opp_get_opp_table(get_cpu_device(0));
dev_pm_opp_put_supported_hw(opp_table);
dev_pm_opp_put_opp_table(opp_table);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment