[ARM] Add support for Realview with MPcore tile

Add uniprocessor support for Realview platform fitted with the
MPcore (SMP) tile.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-realview/Kconfig

@@ -8,4 +8,13 @@ config MACH_REALVIEW_EB
 	help
 	  Include support for the ARM(R) RealView Emulation Baseboard platform.
 
+config REALVIEW_MPCORE
+	bool "Support MPcore tile"
+	depends on MACH_REALVIEW_EB
+	help
+	  Enable support for the MPCore tile on the Realview platform.
+	  Since there are device address and interrupt differences, a
+	  kernel built with this option enabled is not compatible with
+	  other tiles.
+
 endmenu

arch/arm/mach-realview/realview_eb.c

@@ -136,6 +136,11 @@ static struct amba_device *amba_devs[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
+#ifdef CONFIG_REALVIEW_MPCORE
+	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
+	writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
+#endif
 	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
 	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
 }

include/asm-arm/arch-realview/platform.h

@@ -203,8 +203,13 @@
 	/* Reserved 0x1001A000 - 0x1001FFFF */
 #define REALVIEW_CLCD_BASE            0x10020000	/* CLCD */
 #define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+#ifndef CONFIG_REALVIEW_MPCORE
 #define REALVIEW_GIC_CPU_BASE         0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_GIC_DIST_BASE        0x10041000	/* Generic interrupt controller distributor */
+#else
+#define REALVIEW_GIC_CPU_BASE		0x10100100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#endif
 #define REALVIEW_SMC_BASE             0x10080000	/* SMC */
 	/* Reserved 0x10090000 - 0x100EFFFF */
 
@@ -265,6 +270,7 @@
  *  Interrupts - bit assignment (primary)
  * ------------------------------------------------------------------------
  */
+#ifndef CONFIG_REALVIEW_MPCORE
 #define INT_WDOGINT			0	/* Watchdog timer */
 #define INT_SOFTINT			1	/* Software interrupt */
 #define INT_COMMRx			2	/* Debug Comm Rx interrupt */
@@ -297,6 +303,55 @@
 #define INT_USB				29	/* USB controller */
 #define INT_TSPENINT			30	/* Touchscreen pen */
 #define INT_TSKPADINT			31	/* Touchscreen keypad */
+#else
+#define INT_LOCALTIMER			29
+#define INT_LOCALWDOG			30
+
+#define INT_AACI			0
+#define INT_TIMERINT0_1			1
+#define INT_TIMERINT2_3			2
+#define INT_USB				3
+#define INT_UARTINT0			4
+#define INT_UARTINT1			5
+#define INT_RTCINT			6
+#define INT_KMI0			7
+#define INT_KMI1			8
+#define INT_ETH				9
+#define INT_EB_IRQ1			10	/* main GIC */
+#define INT_EB_IRQ2			11	/* tile GIC */
+#define INT_EB_FIQ1			12	/* main GIC */
+#define INT_EB_FIQ2			13	/* tile GIC */
+#define INT_MMCI0A			14
+#define INT_MMCI0B			15
+
+#define INT_PMU_CPU0			17
+#define INT_PMU_CPU1			18
+#define INT_PMU_CPU2			19
+#define INT_PMU_CPU3			20
+#define INT_PMU_SCU0			21
+#define INT_PMU_SCU1			22
+#define INT_PMU_SCU2			23
+#define INT_PMU_SCU3			24
+#define INT_PMU_SCU4			25
+#define INT_PMU_SCU5			26
+#define INT_PMU_SCU6			27
+#define INT_PMU_SCU7			28
+
+#define INT_L220_EVENT			29
+#define INT_L220_SLAVE			30
+#define INT_L220_DECODE			31
+
+#define INT_UARTINT2			-1
+#define INT_UARTINT3			-1
+#define INT_CLCDINT			-1
+#define INT_DMAINT			-1
+#define INT_WDOGINT			-1
+#define INT_GPIOINT0			-1
+#define INT_GPIOINT1			-1
+#define INT_GPIOINT2			-1
+#define INT_SCIINT			-1
+#define INT_SSPINT			-1
+#endif
 
 /* 
  *  Interrupt bit positions