Merge tag 'uniphier-dt64-v4.9' of...

Merge tag 'uniphier-dt64-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

Merge "UniPhier ARM64 SoC DT updates for v4.9" from Masahiro Yamada:

* Match DT names other projects and documents
* Use clock/reset drivers
* Add new SoC/board support
* Misc

* tag 'uniphier-dt64-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add LD11 SoC/Board support
  arm64: dts: uniphier: add specific compatible to SoC-Glue node
  arm64: dts: uniphier: use clock/reset controllers
  arm64: dts: uniphier: add pinctrl property to System Bus node
  arm64: dts: uniphier: match DT names to other projects and documents

arch/arm64/boot/dts/socionext/Makefile

-dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld11-ref.dtb \
+	uniphier-ld20-ref.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb

arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts

+/*
+ * Device Tree Source for UniPhier LD11 Reference Board
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld11.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};

arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi

+/*
+ * Device Tree Source for UniPhier LD11 SoC
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
+
+/ {
+	compatible = "socionext,uniphier-ld11";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000000>;
+		};
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 243 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 244 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 245 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
+		};
+
+		mioctrl@5b3e0000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld11-pinctrl";
+			};
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe40000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts → arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts

 /*
- * Device Tree Source for UniPhier PH1-LD20 Reference Board
+ * Device Tree Source for UniPhier LD20 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld20.dtsi"
+/include/ "uniphier-ld20.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD20 Reference Board";
-	compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
 
 	memory {
 		device_type = "memory";

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi → arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

 /*
- * Device Tree Source for UniPhier PH1-LD20 SoC
+ * Device Tree Source for UniPhier LD20 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
 
 / {
-	compatible = "socionext,ph1-ld20";
+	compatible = "socionext,uniphier-ld20";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -113,18 +114,6 @@ refclk: ref {
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <58820000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 
 	timer {
@@ -148,7 +137,7 @@ serial0: serial@54006800 {
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -158,7 +147,7 @@ serial1: serial@54006900 {
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -168,7 +157,7 @@ serial2: serial@54006a00 {
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -178,7 +167,7 @@ serial3: serial@54006b00 {
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 		};
 
 		i2c0: i2c@58780000 {
@@ -190,7 +179,7 @@ i2c0: i2c@58780000 {
 			interrupts = <0 41 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -203,7 +192,7 @@ i2c1: i2c@58781000 {
 			interrupts = <0 42 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -213,7 +202,7 @@ i2c2: i2c@58782000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -226,7 +215,7 @@ i2c3: i2c@58783000 {
 			interrupts = <0 44 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -239,7 +228,7 @@ i2c4: i2c@58784000 {
 			interrupts = <0 45 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -249,7 +238,7 @@ i2c5: i2c@58785000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -259,6 +248,8 @@ system_bus: system-bus@58c00000 {
 			reg = <0x58c00000 0x400>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
 		smpctrl@59800000 {
@@ -266,12 +257,45 @@ smpctrl@59800000 {
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld20-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld20-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 
 			pinctrl: pinctrl {
-				 compatible = "socionext,uniphier-ld20-pinctrl";
+				compatible = "socionext,uniphier-ld20-pinctrl";
 			};
 		};
 
@@ -283,6 +307,22 @@ gic: interrupt-controller@5fe00000 {
 			#interrupt-cells = <3>;
 			interrupts = <1 9 4>;
 		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };