Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

Documentation/devicetree/bindings/arm/arm-boards

@@ -14,6 +14,9 @@ Required nodes:
 - core-module: the root node to the Integrator platforms must have
   a core-module with regs and the compatible string
   "arm,core-module-integrator"
+- external-bus-interface: the root node to the Integrator platforms
+  must have an external bus interface with regs and the
+  compatible-string "arm,external-bus-interface"
 
   Required properties for the core module:
   - regs: the location and size of the core module registers, one
@@ -48,6 +51,11 @@ Required nodes:
 		reg = <0x10000000 0x200>;
 	};
 
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
 	syscon {
 		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;

Documentation/devicetree/bindings/arm/atmel-aic.txt

@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: Should be "atmel,<chip>-aic"
+  <chip> can be "at91rm9200" or "sama5d3"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -58,7 +58,8 @@ Example:
 	};
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91sam9260-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc",
+			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 - reg: Should contain registers location and length
   For at91sam9263 and at91sam9g45 you must specify 2 entries.

Documentation/devicetree/bindings/arm/moxart.txt

+MOXA ART device tree bindings
+
+Boards with the MOXA ART SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "moxa,moxart";
+
+Boards:
+
+- UC-7112-LX: embedded computer
+  compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"

Documentation/devicetree/bindings/arm/samsung/sysreg.txt

 SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
 
 Properties:
- - name : should be 'sysreg';
  - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
    For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
  - reg : offset and length of the register set.
+
+Example:
+	syscon@10010000 {
+		compatible = "samsung,exynos4-sysreg", "syscon";
+		reg = <0x10010000 0x400>;
+	};

Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt

+* Renesas CPG DIV6 Clock
+
+The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+Generator (CPG). They clock input is divided by a configurable factor from 1
+to 64.
+
+Required Properties:
+
+  - compatible: Must be one of the following
+    - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
+    - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks
+    - "renesas,cpg-div6-clock" for generic DIV6 clocks
+  - reg: Base address and length of the memory resource used by the DIV6 clock
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 0
+  - clock-output-names: The name of the clock as a free-form string
+
+
+Example
+-------
+
+	sd2_clk: sd2_clk@e6150078 {
+		compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+		reg = <0 0xe6150078 0 4>;
+		clocks = <&pll1_div2_clk>;
+		#clock-cells = <0>;
+		clock-output-names = "sd2";
+	};

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

+* Renesas CPG Module Stop (MSTP) Clocks
+
+The CPG can gate SoC device clocks. The gates are organized in groups of up to
+32 gates.
+
+This device tree binding describes a single 32 gate clocks group per node.
+Clocks are referenced by user nodes by the MSTP node phandle and the clock
+index in the group, from 0 to 31.
+
+Required Properties:
+
+  - compatible: Must be one of the following
+    - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
+    - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+    - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
+  - reg: Base address and length of the I/O mapped registers used by the MSTP
+    clocks. The first register is the clock control register and is mandatory.
+    The second register is the clock status register and is optional when not
+    implemented in hardware.
+  - clocks: Reference to the parent clocks, one per output clock. The parents
+    must appear in the same order as the output clocks.
+  - #clock-cells: Must be 1
+  - clock-output-names: The name of the clocks as free-form strings
+  - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+
+The clocks, clock-output-names and renesas,indices properties contain one
+entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
+gate clocks must not be declared.
+
+
+Example
+-------
+
+	#include <dt-bindings/clock/r8a7790-clock.h>
+
+	mstp3_clks: mstp3_clks@e615013c {
+		compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+		reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+		clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
+			 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
+			 <&mmc0_clk>;
+		#clock-cells = <1>;
+		clock-output-names =
+			"tpu0", "mmcif1", "sdhi3", "sdhi2",
+			 "sdhi1", "sdhi0", "mmcif0";
+		renesas,clock-indices = <
+			R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+			R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
+			R8A7790_CLK_MMCIF0
+		>;
+	};

Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt

+* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be one of
+    - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
+    - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "main",
+    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@e6150000 {
+		compatible = "renesas,r8a7790-cpg-clocks",
+			     "renesas,rcar-gen2-cpg-clocks";
+		reg = <0 0xe6150000 0 0x1000>;
+		clocks = <&extal_clk>;
+		#clock-cells = <1>;
+		clock-output-names = "main", "pll0, "pll1", "pll3",
+				     "lb", "qspi", "sdh", "sd0", "sd1", "z";
+	};

Documentation/devicetree/bindings/dma/ste-dma40.txt

@@ -50,6 +50,9 @@ Each dmas request consists of 4 cells:
         0x00000008: Use fixed channel:
                 Use automatic channel selection when unset
                 Use DMA request line number when set
+        0x00000010: Set channel as high priority:
+                Normal priority when unset
+                High priority when set
 
 Example:
 

Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt

@@ -16,6 +16,8 @@ Required Properties:
 	  specific extensions.
 	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
 	  specific extensions.
+	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
+	  specific extensions.
 
 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
   unit (ciu) clock. This property is applicable only for Exynos5 SoC's and

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

@@ -31,38 +31,58 @@ Required properties:
 	7: ..
 	i: Local Timer Interrupt n
 
-Example 1: In this example, the system uses only the first global timer
-	   interrupt generated by MCT and the remaining three global timer
-	   interrupts are unused. Two local timer interrupts have been
-	   specified.
+  For MCT block that uses a per-processor interrupt for local timers, such
+  as ones compatible with "samsung,exynos4412-mct", only one local timer
+  interrupt might be specified, meaning that all local timers use the same
+  per processor interrupt.
+
+Example 1: In this example, the IP contains two local timers, using separate
+	   interrupts, so two local timer interrupts have been specified,
+	   in addition to four global timer interrupts.
 
 	mct@10050000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x10050000 0x800>;
-		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
 			     <0 42 0>, <0 48 0>;
 	};
 
-Example 2: In this example, the MCT global and local timer interrupts are
-	   connected to two separate interrupt controllers. Hence, an
-	   interrupt-map is created to map the interrupts to the respective
-	   interrupt controllers.
+Example 2: In this example, the timer interrupts are connected to two separate
+	   interrupt controllers. Hence, an interrupt-map is created to map
+	   the interrupts to the respective interrupt controllers.
 
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <2>;
 		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
 
 		mct_map: mct-map {
-			#interrupt-cells = <2>;
+			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &gic 0 69 0>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 0 42 0>,
+					<5 &gic 0 48 0>;
 		};
 	};
+
+Example 3: In this example, the IP contains four local timers, but using
+	   a per-processor interrupt to handle them. Either all the local
+	   timer interrupts can be specified, with the same interrupt specifier
+	   value or just the first one.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+
+		/* Both ways are possible in this case. Either: */
+		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+			     <0 42 0>;
+		/* or: */
+		interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+			     <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
+	};

Documentation/devicetree/bindings/usb/keystone-phy.txt

+TI Keystone USB PHY
+
+Required properties:
+ - compatible: should be "ti,keystone-usbphy".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+   with 'reg' property.
+ - reg : Address and length of the usb phy control register set.
+
+The main purpose of this PHY driver is to enable the USB PHY reference clock
+gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
+an NOP PHY driver.  Hence this node is referenced as both the usb2 and usb3
+phy node in the USB Glue layer driver node.
+
+usb_phy: usb_phy@2620738 {
+	compatible = "ti,keystone-usbphy";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x2620738 32>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/usb/keystone-usb.txt

+TI Keystone Soc USB Controller
+
+DWC3 GLUE
+
+Required properties:
+ - compatible: should be "ti,keystone-dwc3".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+   with 'reg' property.
+ - reg : Address and length of the register set for the USB subsystem on
+   the SOC.
+ - interrupts : The irq number of this device that is used to interrupt the
+   MPU.
+ - ranges: allows valid 1:1 translation between child's address space and
+   parent's address space.
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Keystone DWC3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+	usb: usb@2680000 {
+		compatible = "ti,keystone-dwc3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2680000 0x10000>;
+		clocks = <&clkusb>;
+		clock-names = "usb";
+		interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+		ranges;
+		status = "disabled";
+
+		dwc3@2690000 {
+			compatible = "synopsys,dwc3";
+			reg = <0x2690000 0x70000>;
+			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+			usb-phy = <&usb_phy>, <&usb_phy>;
+		};
+	};

arch/arm/boot/dts/Makefile

@@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
 # sam9x5
 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
@@ -41,6 +42,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d36ek.dtb
+
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
@@ -64,10 +67,12 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-origen.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-tiny4412.dtb \
 	exynos4412-trats2.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5420-arndale-octa.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
@@ -91,11 +96,13 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-iomega_ix2_200.dtb \
 	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
+	kirkwood-laplug.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
 	kirkwood-mv88f6281gtw-ge.dtb \
 	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
 	kirkwood-ns2.dtb \
 	kirkwood-ns2lite.dtb \
 	kirkwood-ns2max.dtb \
@@ -110,6 +117,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
+dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
@@ -120,6 +128,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-netgear-rn2120.dtb \
 	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
@@ -261,6 +270,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
 	sun6i-a31-colombus.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \

arch/arm/boot/dts/animeo_ip.dts

@@ -90,34 +90,19 @@ nand0: nand@40000000 {
 			nand-on-flash-bbt;
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x8000>;
-			};
-
-			barebox@8000 {
+			barebox@0 {
 				label = "barebox";
-				reg = <0x8000 0x40000>;
-			};
-
-			bareboxenv@48000 {
-				label = "bareboxenv";
-				reg = <0x48000 0x8000>;
-			};
-
-			user_block@0x50000 {
-				label = "user_block";
-				reg = <0x50000 0xb0000>;
+				reg = <0x0 0x58000>;
 			};
 
-			kernel@100000 {
-				label = "kernel";
-				reg = <0x100000 0x1b0000>;
+			u_boot_env@58000 {
+				label = "u_boot_env";
+				reg = <0x58000 0x8000>;
 			};
 
-			root@2b0000 {
-				label = "root";
-				reg = <0x2b0000 0x1D50000>;
+			ubi@60000 {
+				label = "ubi";
+				reg = <0x60000 0x1FA0000>;
 			};
 		};
 

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -74,13 +74,13 @@ gpio_leds {
 				green_pwr_led {
 					label = "mirabox:green:pwr";
 					gpios = <&gpio1 31 1>;
-					linux,default-trigger = "heartbeat";
+					default-state = "keep";
 				};
 
 				blue_stat_led {
 					label = "mirabox:blue:stat";
 					gpios = <&gpio2 0 1>;
-					linux,default-trigger = "cpu0";
+					default-state = "off";
 				};
 
 				green_stat_led {
@@ -139,6 +139,27 @@ pca9505: pca9505@25 {
 					reg = <0x25>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x400000>;
+				};
+				partition@400000 {
+					label = "Linux";
+					reg = <0x400000 0x400000>;
+				};
+				partition@800000 {
+					label = "Filesystem";
+					reg = <0x800000 0x3f800000>;
+				};
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -62,6 +64,7 @@ power_led_pin: power-led-pin {
 					marvell,pins = "mpp57";
 					marvell,function = "gpio";
 				};
+
 				sata1_led_pin: sata1-led-pin {
 					marvell,pins = "mpp15";
 					marvell,function = "gpio";
@@ -77,6 +80,21 @@ backup_led_pin: backup-led-pin {
 					marvell,function = "gpio";
 				};
 
+				backup_button_pin: backup-button-pin {
+					marvell,pins = "mpp58";
+					marvell,function = "gpio";
+				};
+
+				power_button_pin: power-button-pin {
+					marvell,pins = "mpp62";
+					marvell,function = "gpio";
+				};
+
+				reset_button_pin: reset-button-pin {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
 				poweroff: poweroff {
 					marvell,pins = "mpp8";
 					marvell,function = "gpio";
@@ -84,7 +102,7 @@ poweroff: poweroff {
 			};
 
 			mdio {
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 					reg = <0>;
 				};
 			};
@@ -104,6 +122,11 @@ i2c@11000 {
 				clock-frequency = <100000>;
 				status = "okay";
 
+				isl12057: isl12057@68 {
+					compatible = "isl,isl12057";
+					reg = <0x68>;
+				};
+
 				g762: g762@3e {
 					compatible = "gmt,g762";
 					reg = <0x3e>;
@@ -113,82 +136,116 @@ g762: g762@3e {
 					pwm_polarity = <0>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
+			};
 		};
 	};
 
 	clocks {
-	       #address-cells = <1>;
-	       #size-cells = <0>;
-
-	       g762_clk: fixedclk {
+	       g762_clk: g762-oscillator {
 			 compatible = "fixed-clock";
 			 #clock-cells = <0>;
 			 clock-frequency = <8192>;
 	       };
 	};
 
-	gpio_leds {
+	gpio-leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = < &power_led_pin
-			      &sata1_led_pin
-			      &sata2_led_pin
-			      &backup_led_pin >;
+		pinctrl-0 = <&power_led_pin
+			     &sata1_led_pin
+			     &sata2_led_pin
+			     &backup_led_pin>;
 		pinctrl-names = "default";
 
-		blue_power_led {
+		blue-power-led {
 			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 1>;  /* GPIO 57 Active Low */
-			linux,default-trigger = "heartbeat";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
 		};
 
-		green_sata1_led {
+		green-sata1-led {
 			label = "rn102:green:sata1";
-			gpios = <&gpio0 15 1>;  /* GPIO 15 Active Low */
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		green_sata2_led {
+		green-sata2-led {
 			label = "rn102:green:sata2";
-			gpios = <&gpio0 14 1>;   /* GPIO 14 Active Low */
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		green_backup_led {
+		green-backup-led {
 			label = "rn102:green:backup";
-			gpios = <&gpio1 24 1>;   /* GPIO 56 Active Low */
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
+		pinctrl-0 = <&power_button_pin
+			     &reset_button_pin
+			     &backup_button_pin>;
+		pinctrl-names = "default";
 
-		button@1 {
+		power-button {
 			label = "Power Button";
-			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 0>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@2 {
+		reset-button {
 			label = "Reset Button";
-			linux,code = <0x198>;   /* KEY_RESTART */
-			gpios = <&gpio0 6 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 		};
 
-		button@3 {
+		backup-button {
 			label = "Backup Button";
-			linux,code = <133>;     /* KEY_COPY */
-			gpios = <&gpio1 26 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_poweroff {
+	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&poweroff>;
 		pinctrl-names = "default";
-		gpios = <&gpio0 8 1>;
+		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 	};
-
 };

arch/arm/boot/dts/armada-370-netgear-rn104.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
 / {
@@ -58,12 +60,12 @@ poweroff: poweroff {
 					marvell,function = "gpio";
 				};
 
-				backup_key_pin: backup-key-pin {
+				backup_button_pin: backup-button-pin {
 					marvell,pins = "mpp52";
 					marvell,function = "gpio";
 				};
 
-				power_key_pin: power-key-pin {
+				power_button_pin: power-button-pin {
 					marvell,pins = "mpp62";
 					marvell,function = "gpio";
 				};
@@ -78,18 +80,18 @@ power_led_pin: power-led-pin {
 					marvell,function = "gpio";
 				};
 
-				reset_key_pin: reset-key-pin {
+				reset_button_pin: reset-button-pin {
 					marvell,pins = "mpp65";
 					marvell,function = "gpio";
 				};
 			};
 
 			mdio {
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 					reg = <0>;
 				};
 
-				phy1: ethernet-phy@1 {
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
 					reg = <1>;
 				};
 			};
@@ -115,6 +117,11 @@ i2c@11000 {
 				clock-frequency = <100000>;
 				status = "okay";
 
+				isl12057: isl12057@68 {
+					compatible = "isl,isl12057";
+					reg = <0x68>;
+				};
+
 				g762: g762@3e {
 					compatible = "gmt,g762";
 					reg = <0x3e>;
@@ -123,71 +130,133 @@ g762: g762@3e {
 					fan_startv = <1>;
 					pwm_polarity = <0>;
 				};
+
+				pca9554: pca9554@23 {
+					compatible = "nxp,pca9554";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x23>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
 			};
 		};
 	};
 
 	clocks {
-	       #address-cells = <1>;
-	       #size-cells = <0>;
-
-	       g762_clk: fixedclk {
+	       g762_clk: g762-oscillator {
 			 compatible = "fixed-clock";
 			 #clock-cells = <0>;
 			 clock-frequency = <8192>;
 	       };
 	};
 
-	gpio_leds {
+	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&backup_led_pin &power_led_pin>;
 		pinctrl-names = "default";
 
-		blue_backup_led {
+		blue-backup-led {
 			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 0>;   /* GPIO 63 Active High */
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		blue_power_led {
+		blue-power-led {
 			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 1>;    /* GPIO 64 Active Low */
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "keep";
 		};
+
+		blue-sata1-led {
+			label = "rn104:blue:sata1";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata2-led {
+			label = "rn104:blue:sata2";
+			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata3-led {
+			label = "rn104:blue:sata3";
+			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata4-led {
+			label = "rn104:blue:sata4";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&backup_key_pin
-			     &power_key_pin
-			     &reset_key_pin>;
+		pinctrl-0 = <&backup_button_pin
+			     &power_button_pin
+			     &reset_button_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		backup-button {
 			label = "Backup Button";
-			linux,code = <133>;     /* KEY_COPY */
-			gpios = <&gpio1 20 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		power-button {
 			label = "Power Button";
-			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 0>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@3 {
+		reset-button {
 			label = "Reset Button";
-			linux,code = <0x198>;   /* KEY_RESTART */
-			gpios = <&gpio2 1 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_poweroff {
+	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&poweroff>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 28 1>;
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 	};
 };

arch/arm/boot/dts/armada-370-rd.dts

@@ -104,6 +104,27 @@ button@1 {
 					gpios = <&gpio0 6 1>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
 		};
 	};
  };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -103,22 +103,52 @@ internal-regs {
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
 			};
 
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <30>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
 			};
 
-			coherency-fabric@20200 {
-				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <92>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
 			};
 
 			serial@12000 {
@@ -146,25 +176,41 @@ coredivclk: corediv-clock@18740 {
 				clock-output-names = "nand";
 			};
 
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			};
+
 			timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			sata@a0000 {
-				compatible = "marvell,armada-370-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <55>;
-				clocks = <&gateclk 15>, <&gateclk 30>;
-				clock-names = "0", "1";
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
 				status = "disabled";
 			};
 
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
+			usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
 			};
 
 			eth0: ethernet@70000 {
@@ -175,6 +221,13 @@ eth0: ethernet@70000 {
 				status = "disabled";
 			};
 
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+			};
+
 			eth1: ethernet@74000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x74000 0x4000>;
@@ -183,32 +236,25 @@ eth1: ethernet@74000 {
 				status = "disabled";
 			};
 
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <31>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
+			sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
 				status = "disabled";
 			};
 
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <32>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
+				#size-cells = <1>;
+				interrupts = <113>;
+				clocks = <&coredivclk 0>;
 				status = "disabled";
 			};
 
-			rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <50>;
-			};
-
 			mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
@@ -220,43 +266,6 @@ mvsdio@d4000 {
 				cap-mmc-highspeed;
 				status = "disabled";
 			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			usb@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x500>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 		};
 	};
 

arch/arm/boot/dts/armada-370.dtsi

@@ -91,11 +91,6 @@ pcie@2,0 {
 		};
 
 		internal-regs {
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
 			L2: l2-cache {
 				compatible = "marvell,aurora-outer-cache";
 				reg = <0x08000 0x1000>;
@@ -103,8 +98,17 @@ L2: l2-cache {
 				wt-override;
 			};
 
-			interrupt-controller@20000 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
+			};
+
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
 			};
 
 			pinctrl {
@@ -163,9 +167,11 @@ gpio2: gpio@18180 {
 				interrupts = <91>;
 			};
 
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -174,11 +180,28 @@ coreclk: mvebu-sar@18230 {
 				#clock-cells = <1>;
 			};
 
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-370-gating-clock";
-				reg = <0x18220 0x4>;
+			thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
+
+			interrupt-controller@20000 {
+				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-370-timer";
+				clocks = <&coreclk 2>;
+			};
+
+			usb@50000 {
+				clocks = <&coreclk 0>;
+			};
+
+			usb@51000 {
 				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
 			};
 
 			xor@60800 {
@@ -218,29 +241,6 @@ xor11 {
 					dmacap,memset;
 				};
 			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			thermal@18300 {
-				compatible = "marvell,armada370-thermal";
-				reg = <0x18300 0x4
-					0x18304 0x4>;
-				status = "okay";
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-gp.dts

@@ -175,6 +175,14 @@ spi-flash@0 {
 					spi-max-frequency = <108000000>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to first Marvell 88SE9170 SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to second Marvell 88SE9170 SATA controller */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				poweroff: poweroff {
+					marvell,pins = "mpp42";
+					marvell,function = "gpio";
+				};
+
+				power_button_pin: power-button-pin {
+					marvell,pins = "mpp27";
+					marvell,function = "gpio";
+				};
+
+				reset_button_pin: reset-button-pin {
+					marvell,pins = "mpp41";
+					marvell,function = "gpio";
+				};
+
+				sata1_led_pin: sata1-led-pin {
+					marvell,pins = "mpp31";
+					marvell,function = "gpio";
+				};
+
+				sata2_led_pin: sata2-led-pin {
+					marvell,pins = "mpp40";
+					marvell,function = "gpio";
+				};
+
+				sata3_led_pin: sata3-led-pin {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+
+				sata4_led_pin: sata4-led-pin {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				sata1_power_pin: sata1-power-pin {
+					marvell,pins = "mpp24";
+					marvell,function = "gpio";
+				};
+
+				sata2_power_pin: sata2-power-pin {
+					marvell,pins = "mpp25";
+					marvell,function = "gpio";
+				};
+
+				sata3_power_pin: sata3-power-pin {
+					marvell,pins = "mpp26";
+					marvell,function = "gpio";
+				};
+
+				sata4_power_pin: sata4-power-pin {
+					marvell,pins = "mpp28";
+					marvell,function = "gpio";
+				};
+
+				sata1_pres_pin: sata1-pres-pin {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+
+				sata2_pres_pin: sata2-pres-pin {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				sata3_pres_pin: sata3-pres-pin {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				sata4_pres_pin: sata4-pres-pin {
+					marvell,pins = "mpp35";
+					marvell,function = "gpio";
+				};
+
+				err_led_pin: err-led-pin {
+					marvell,pins = "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				clocks = <&coreclk 0>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				isl12057: isl12057@68 {
+					compatible = "isl,isl12057";
+					reg = <0x68>;
+				};
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red-sata1-led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata2-led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata3-led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata4-led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-err-led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -103,8 +103,7 @@ yellow_led {
 				green_led {
 					label = "green_led";
 					gpios = <&gpio1 21 1>;
-					default-state = "off";
-					linux,default-trigger = "heartbeat";
+					default-state = "keep";
 				};
 			};
 

arch/arm/boot/dts/armada-xp.dtsi

@@ -42,13 +42,14 @@ L2: l2-cache {
 				wt-override;
 			};
 
-			interrupt-controller@20000 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x100>;
 			};
 
-			armada-370-xp-pmsu@22000 {
-				compatible = "marvell,armada-370-xp-pmsu";
-				reg = <0x22100 0x430>, <0x20800 0x20>;
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x100>;
 			};
 
 			serial@12200 {
@@ -68,10 +69,16 @@ serial@12300 {
 				status = "disabled";
 			};
 
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -80,6 +87,13 @@ coreclk: mvebu-sar@18230 {
 				#clock-cells = <1>;
 			};
 
+			thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
+
 			cpuclk: clock-complex@18700 {
 				#clock-cells = <1>;
 				compatible = "marvell,armada-xp-cpu-clock";
@@ -87,16 +101,19 @@ cpuclk: clock-complex@18700 {
 				clocks = <&coreclk 1>;
 			};
 
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-xp-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
+			interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 			};
 
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
+			timer@20300 {
+				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			armada-370-xp-pmsu@22000 {
+				compatible = "marvell,armada-370-xp-pmsu";
+				reg = <0x22100 0x400>, <0x20800 0x20>;
 			};
 
 			eth2: ethernet@30000 {
@@ -107,6 +124,22 @@ eth2: ethernet@30000 {
 				status = "disabled";
 			};
 
+			usb@50000 {
+				clocks = <&gateclk 18>;
+			};
+
+			usb@51000 {
+				clocks = <&gateclk 19>;
+			};
+
+			usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
+
 			xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
@@ -146,39 +179,6 @@ xor01 {
 					dmacap,memset;
 				};
 			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x52000 0x500>;
-				interrupts = <47>;
-				clocks = <&gateclk 20>;
-				status = "disabled";
-			};
-
-			thermal@182b0 {
-				compatible = "marvell,armadaxp-thermal";
-				reg = <0x182b0 0x4
-					0x184d0 0x4>;
-				status = "okay";
-			};
 		};
 	};
 

arch/arm/boot/dts/at91-cosino.dtsi

+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-clock-rate = <1000000>;
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;	/* Enable PMECC */
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "u-boot";
+				reg = <0x40000 0x80000>;
+			};
+
+			ubootenv@c0000 {
+				label = "U-Boot Env";
+				reg = <0xc0000 0x140000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/at91-cosino_mega2560.dts

+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			adc0: adc@f804c000 {
+				atmel,adc-clock-rate = <1000000>;
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+
+			tsadcc: tsadcc@f804c000 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+
+			usart1: serial@f8020000 {
+				status = "okay";
+			};
+
+			usart2: serial@f8024000 {
+				status = "okay";
+			};
+
+			usb2: gadget@f803c000 {
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc1: mmc@f000c000 {
+				pinctrl-0 = <
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					non-removable;
+				};
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+					   &pioD 19 GPIO_ACTIVE_LOW
+					   &pioD 20 GPIO_ACTIVE_LOW
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/at91rm9200.dtsi

@@ -191,12 +191,12 @@ pinctrl_uart0: uart0-0 {
 							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA18 periph A */
 					};
 
-					pinctrl_uart0_rts: uart0_rts-0 {
+					pinctrl_uart0_cts: uart0_cts-0 {
 						atmel,pins =
 							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
 					};
 
-					pinctrl_uart0_cts: uart0_cts-0 {
+					pinctrl_uart0_rts: uart0_rts-0 {
 						atmel,pins =
 							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
 					};

arch/arm/boot/dts/at91rm9200ek.dts

@@ -29,10 +29,22 @@ main_clock: clock@0 {
 
 	ahb {
 		apb {
-			dbgu: serial@fffff200 {
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy {
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+
 			usart1: serial@fffc4000 {
 				pinctrl-0 =
 						<&pinctrl_uart1
@@ -44,16 +56,6 @@ &pinctrl_uart1_dcd
 				status = "okay";
 			};
 
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffb0000 {
-				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
@@ -63,12 +65,45 @@ mtd_dataflash@0 {
 					reg = <0>;
 				};
 			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
+
+		nor_flash@10000000 {
+			compatible = "cfi-flash";
+			reg = <0x10000000 0x800000>;
+			linux,mtd-name = "physmap-flash.0";
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			barebox@0 {
+				label = "barebox";
+				reg = <0x00000 0x40000>;
+			};
+
+			bareboxenv@40000 {
+				label = "bareboxenv";
+				reg = <0x40000 0x10000>;
+			};
+
+			kernel@50000 {
+				label = "kernel";
+				reg = <0x50000 0x300000>;
+			};
+
+			root@350000  {
+				label = "root";
+				reg = <0x350000 0x4B0000>;
+			};
+		};
 	};
 
 	leds {

arch/arm/boot/dts/at91sam9263.dtsi

@@ -30,6 +30,7 @@ aliases {
 		i2c0 = &i2c0;
 		ssc0 = &ssc0;
 		ssc1 = &ssc1;
+		pwm0 = &pwm0;
 	};
 	cpus {
 		#address-cells = <0>;
@@ -366,6 +367,34 @@ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 					};
 				};
 
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
+							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
+							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -547,6 +576,23 @@ spi1: spi@fffa8000 {
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
 			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@0x00700000 {
+			compatible = "atmel,at91sam9263-lcdc";
+			reg = <0x00700000 0x1000>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			status = "disabled";
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9263ek.dts

@@ -95,6 +95,36 @@ watchdog@fffffd40 {
 			};
 		};
 
+		fb0: fb@0x00700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -37,6 +37,7 @@ aliases {
 		i2c1 = &i2c1;
 		ssc0 = &ssc0;
 		ssc1 = &ssc1;
+		pwm0 = &pwm0;
 	};
 	cpus {
 		#address-cells = <0>;
@@ -143,6 +144,22 @@ pinctrl_dbgu: dbgu-0 {
 					};
 				};
 
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -425,6 +442,42 @@ pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 					};
 				};
 
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -542,6 +595,8 @@ i2c0: i2c@fff84000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff84000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -551,6 +606,8 @@ i2c1: i2c@fff88000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff88000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -614,10 +671,19 @@ trigger@3 {
 				};
 			};
 
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			mmc0: mmc@fff80000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -629,6 +695,7 @@ mmc1: mmc@fffd0000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -727,6 +794,15 @@ ep6 {
 			};
 		};
 
+		fb0: fb@0x00500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			status = "disabled";
+		};
+
 		nand0: nand@40000000 {
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -105,6 +105,14 @@ pinctrl_board_mmc1: mmc1-board {
 							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
 					};
 				};
+
+				pwm0 {
+					pinctrl_pwm_leds: pwm-led {
+						atmel,pins =
+							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
+							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
+					};
+				};
 			};
 
 			spi0: spi@fffa4000{
@@ -121,6 +129,42 @@ usb2: gadget@fff78000 {
 				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
+
+			pwm0: pwm@fffb8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm_leds>;
+			};
+		};
+
+		fb0: fb@0x00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -165,16 +209,22 @@ d8 {
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
 
 		d6 {
 			label = "d6";
-			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+			pwms = <&pwm0 3 5000 0>;
+			max-brightness = <255>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d7 {
 			label = "d7";
-			gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
+			pwms = <&pwm0 1 5000 0>;
+			max-brightness = <255>;
 			linux,default-trigger = "mmc0";
 		};
 	};

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -33,6 +33,7 @@ aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		ssc0 = &ssc0;
+		pwm0 = &pwm0;
 	};
 	cpus {
 		#address-cells = <0>;
@@ -542,6 +543,14 @@ watchdog@fffffe40 {
 				reg = <0xfffffe40 0x10>;
 				status = "disabled";
 			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -35,6 +35,7 @@ aliases {
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		ssc0 = &ssc0;
+		pwm0 = &pwm0;
 	};
 	cpus {
 		#address-cells = <0>;
@@ -762,6 +763,14 @@ rtc@fffffeb0 {
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				status = "disabled";
 			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/atlas6.dtsi

@@ -27,6 +27,15 @@ cpu@0 {
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				600000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
 		};
 	};
 
@@ -69,6 +78,7 @@ rsc-controller@88020000 {
 			cphifbg@88030000 {
 				compatible = "sirf,prima2-cphifbg";
 				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
 			};
 		};
 
@@ -546,6 +556,12 @@ usp1 {
                                                 sirf,function = "usp1";
                                         };
                                 };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
+                                                sirf,function = "usp1_uart_nostreamctrl";
+                                        };
+                                };
                                 usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
                                         usb0_upli_drvbus {
                                                 sirf,pins = "usb0_upli_drvbusgrp";
@@ -636,6 +652,7 @@ sd1: sdhci@56100000 {
 					reg = <0x56100000 0x100000>;
 					interrupts = <38>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 36>;
 				};
 
@@ -645,6 +662,7 @@ sd2: sdhci@56200000 {
 					reg = <0x56200000 0x100000>;
 					interrupts = <23>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 37>;
 				};
 
@@ -654,6 +672,7 @@ sd3: sdhci@56300000 {
 					reg = <0x56300000 0x100000>;
 					interrupts = <23>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 37>;
 				};
 
@@ -663,6 +682,7 @@ sd5: sdhci@56500000 {
 					reg = <0x56500000 0x100000>;
 					interrupts = <39>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 38>;
 				};
 
@@ -697,6 +717,12 @@ sysrtc@2000 {
 				interrupts = <52 53 54>;
 			};
 
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
 			pwrc@3000 {
 				compatible = "sirf,prima2-pwrc";
 				reg = <0x3000 0x1000>;

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -23,10 +23,15 @@ act {
 
 &gpio {
 	pinctrl-names = "default";
-	pinctrl-0 = <&alt0 &alt3>;
+	pinctrl-0 = <&gpioout &alt0 &alt3>;
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <1>; /* GPIO out */
+	};
 
 	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>;
+		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
 		brcm,function = <4>; /* alt0 */
 	};
 

arch/arm/boot/dts/bcm2835.dtsi

@@ -107,6 +107,12 @@ sdhci: sdhci {
 			clocks = <&clk_mmc>;
 			status = "disabled";
 		};
+
+		usb {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+		};
 	};
 
 	clocks {

arch/arm/boot/dts/da850-evm.dts

@@ -101,6 +101,9 @@ eth0: ethernet@1e20000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mii_pins>;
 		};
+		gpio: gpio@1e26000 {
+			status = "okay";
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";

arch/arm/boot/dts/da850.dtsi

@@ -8,6 +8,7 @@
  * option) any later version.
  */
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	arm {
@@ -256,6 +257,19 @@ eth0: ethernet@1e20000 {
 					36
 					>;
 		};
+		gpio: gpio@1e26000 {
+			compatible = "ti,dm6441-gpio";
+			gpio-controller;
+			reg = <0x226000 0x1000>;
+			interrupts = <42 IRQ_TYPE_EDGE_BOTH
+				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
+				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
+				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
+				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+			ti,ngpio = <144>;
+			ti,davinci-gpio-unbanked = <0>;
+			status = "disabled";
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";

arch/arm/boot/dts/dove-cubox.dts

@@ -23,7 +23,7 @@ leds {
 		power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
-			linux,default-trigger = "default-on";
+			default-state = "keep";
 		};
 	};
 

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -9,7 +9,10 @@
  */
 /dts-v1/;
 
-/include/ "emev2.dtsi"
+#include "emev2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "EMEV2 KZM9D Board";
@@ -47,11 +50,46 @@ lan9220@20000000 {
 		reg = <0x20000000 0x10000>;
 		phy-mode = "mii";
 		interrupt-parent = <&gpio0>;
-		interrupts = <1 1>;	/* active high */
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
 		reg-io-width = <4>;
 		smsc,irq-active-high;
 		smsc,irq-push-pull;
 		vddvario-supply = <&reg_1p8v>;
 		vdd33a-supply = <&reg_3p3v>;
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-1";
+			linux,code = <KEY_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-2";
+			linux,code = <KEY_2>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-3";
+			linux,code = <KEY_3>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-4";
+			linux,code = <KEY_4>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
 };

arch/arm/boot/dts/emev2.dtsi

@@ -8,7 +8,8 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "renesas,emev2";
@@ -48,44 +49,129 @@ gic: interrupt-controller@e0020000 {
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smu@e0110000 {
+		compatible = "renesas,emev2-smu";
+		reg = <0xe0110000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		c32ki: c32ki {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+		pll3_fo: pll3_fo {
+			compatible = "fixed-factor-clock";
+			clocks = <&c32ki>;
+			clock-div = <1>;
+			clock-mult = <7000>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclkdiv: usia_u0_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x610 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclkdiv: usib_u1_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclkdiv: usib_u2_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclkdiv: usib_u3_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x660 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclk: usia_u0_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4a0 1>;
+			clocks = <&usia_u0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclk: usib_u1_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4b8 1>;
+			clocks = <&usib_u1_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclk: usib_u2_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4bc 1>;
+			clocks = <&usib_u2_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclk: usib_u3_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4c0 1>;
+			clocks = <&usib_u3_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		sti_sclk: sti_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x528 1>;
+			clocks = <&c32ki>;
+			#clock-cells = <0>;
+		};
 	};
 
 	sti@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
-		interrupts = <0 125 0>;
+		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sti_sclk>;
+		clock-names = "sclk";
 	};
 
 	uart@e1020000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1020000 0x38>;
-		interrupts = <0 8 0>;
+		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usia_u0_sclk>;
+		clock-names = "sclk";
 	};
 
 	uart@e1030000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1030000 0x38>;
-		interrupts = <0 9 0>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u1_sclk>;
+		clock-names = "sclk";
 	};
 
 	uart@e1040000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1040000 0x38>;
-		interrupts = <0 10 0>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u2_sclk>;
+		clock-names = "sclk";
 	};
 
 	uart@e1050000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1050000 0x38>;
-		interrupts = <0 11 0>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u3_sclk>;
+		clock-names = "sclk";
 	};
 
 	gpio0: gpio@e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <0 67 0>, <0 68 0>;
+		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpios = <32>;
@@ -95,7 +181,8 @@ gpio0: gpio@e0050000 {
 	gpio1: gpio@e0050080 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <0 69 0>, <0 70 0>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpios = <32>;
@@ -105,7 +192,8 @@ gpio1: gpio@e0050080 {
 	gpio2: gpio@e0050100 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <0 71 0>, <0 72 0>;
+		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpios = <32>;
@@ -115,7 +203,8 @@ gpio2: gpio@e0050100 {
 	gpio3: gpio@e0050180 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <0 73 0>, <0 74 0>;
+		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpios = <32>;
@@ -125,7 +214,8 @@ gpio3: gpio@e0050180 {
 	gpio4: gpio@e0050200 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <0 75 0>, <0 76 0>;
+		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpios = <31>;

arch/arm/boot/dts/exynos4.dtsi

@@ -85,21 +85,21 @@ pd_gps: gps-power-domain@10023CE0 {
 		reg = <0x10023CE0 0x20>;
 	};
 
-	gic:interrupt-controller@10490000 {
+	gic: interrupt-controller@10490000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};
 
-	combiner:interrupt-controller@10440000 {
+	combiner: interrupt-controller@10440000 {
 		compatible = "samsung,exynos4210-combiner";
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0x10440000 0x1000>;
 	};
 
-	sys_reg: sysreg {
+	sys_reg: syscon@10010000 {
 		compatible = "samsung,exynos4-sysreg", "syscon";
 		reg = <0x10010000 0x400>;
 	};

arch/arm/boot/dts/exynos4210.dtsi

@@ -36,11 +36,11 @@ pd_lcd1: lcd1-power-domain@10023CA0 {
 		reg = <0x10023CA0 0x20>;
 	};
 
-	gic:interrupt-controller@10490000 {
+	gic: interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
 
-	combiner:interrupt-controller@10440000 {
+	combiner: interrupt-controller@10440000 {
 		samsung,combiner-nr = <16>;
 		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
 			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
@@ -51,24 +51,21 @@ combiner:interrupt-controller@10440000 {
 	mct@10050000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x10050000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <2>;
 		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
 		clocks = <&clock 3>, <&clock 344>;
 		clock-names = "fin_pll", "mct";
 
 		mct_map: mct-map {
-			#interrupt-cells = <2>;
+			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = <0x0 0 &gic 0 57 0>,
-					<0x1 0 &gic 0 69 0>,
-					<0x2 0 &combiner 12 6>,
-					<0x3 0 &combiner 12 7>,
-					<0x4 0 &gic 0 42 0>,
-					<0x5 0 &gic 0 48 0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &gic 0 69 0>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 0 42 0>,
+					<5 &gic 0 48 0>;
 		};
 	};
 

arch/arm/boot/dts/exynos4212.dtsi

@@ -22,7 +22,7 @@
 / {
 	compatible = "samsung,exynos4212";
 
-	gic:interrupt-controller@10490000 {
+	gic: interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
 
@@ -34,26 +34,4 @@ interrupt-controller@10440000 {
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
 			     <0 107 0>, <0 108 0>;
 	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4412-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-
-		mct_map: mct-map {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &gic 0 57 0>,
-					<0x1 0 &combiner 12 5>,
-					<0x2 0 &combiner 12 6>,
-					<0x3 0 &combiner 12 7>,
-					<0x4 0 &gic 1 12 0>,
-					<0x5 0 &gic 1 12 0>;
-		};
-	};
 };

arch/arm/boot/dts/exynos4412-tiny4412.dts

+/*
+ * FriendlyARM's Exynos4412 based TINY4412 board device tree source
+ *
+ * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
+ *
+ * Device tree source file for FriendlyARM's TINY4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "FriendlyARM TINY4412 board based on Exynos4412";
+	compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpm4 0 1>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpm4 1 1>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpm4 2 1>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpm4 3 1>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};

arch/arm/boot/dts/exynos4412.dtsi

@@ -22,7 +22,7 @@
 / {
 	compatible = "samsung,exynos4412";
 
-	gic:interrupt-controller@10490000 {
+	gic: interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
 
@@ -35,30 +35,4 @@ interrupt-controller@10440000 {
 			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
 	};
 
-	mct@10050000 {
-		compatible = "samsung,exynos4412-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>, <6 0>, <7 0>;
-		clocks = <&clock 3>, <&clock 344>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &gic 0 57 0>,
-					<0x1 0 &combiner 12 5>,
-					<0x2 0 &combiner 12 6>,
-					<0x3 0 &combiner 12 7>,
-					<0x4 0 &gic 1 12 0>,
-					<0x5 0 &gic 1 12 0>,
-					<0x6 0 &gic 1 12 0>,
-					<0x7 0 &gic 1 12 0>;
-		};
-	};
-
 };

arch/arm/boot/dts/exynos4x12.dtsi

@@ -42,6 +42,26 @@ clock: clock-controller@10030000 {
 		#clock-cells = <1>;
 	};
 
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &combiner 12 5>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 1 12 0>;
+		};
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;

arch/arm/boot/dts/exynos5.dtsi

@@ -23,7 +23,7 @@ chipid@10000000 {
 		reg = <0x10000000 0x100>;
 	};
 
-	combiner:interrupt-controller@10440000 {
+	combiner: interrupt-controller@10440000 {
 		compatible = "samsung,exynos4210-combiner";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -39,7 +39,7 @@ combiner:interrupt-controller@10440000 {
 				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};
 
-	gic:interrupt-controller@10481000 {
+	gic: interrupt-controller@10481000 {
 		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -50,27 +50,6 @@ gic:interrupt-controller@10481000 {
 		interrupts = <1 9 0xf04>;
 	};
 
-	dwmmc_0: dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc_1: dwmmc1@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc_2: dwmmc2@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -34,6 +34,7 @@ i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
 		samsung,i2c-slave-addr = <0x66>;
+		status = "okay";
 
 		s5m8767_pmic@66 {
 			compatible = "samsung,s5m8767-pmic";
@@ -266,7 +267,7 @@ buck1_reg: BUCK1 {
 
 				buck2_reg: BUCK2 {
 					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <925000>;
+					regulator-min-microvolt = <912500>;
 					regulator-max-microvolt = <1300000>;
 					regulator-always-on;
 					regulator-boot-on;
@@ -321,11 +322,9 @@ buck9_reg: BUCK9 {
 		};
 	};
 
-	i2c@12C70000 {
-		status = "disabled";
-	};
-
 	i2c@12C80000 {
+		status = "okay";
+
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 		samsung,i2c-slave-addr = <0x50>;
@@ -337,7 +336,10 @@ hdmiddc@50 {
 	};
 
 	i2c@12C90000 {
+		status = "okay";
+
 		wm1811a@1a {
+
 			compatible = "wlf,wm1811";
 			reg = <0x1a>;
 
@@ -355,23 +357,9 @@ wm1811a@1a {
 		};
 	};
 
-	i2c@12CA0000 {
-		status = "disabled";
-	};
-
-	i2c@12CB0000 {
-		status = "disabled";
-	};
-
-	i2c@12CC0000 {
-		status = "disabled";
-	};
-
-	i2c@12CD0000 {
-		status = "disabled";
-	};
-
 	i2c@12CE0000 {
+		status = "okay";
+
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 		samsung,i2c-slave-addr = <0x38>;
@@ -382,15 +370,11 @@ hdmiphy@38 {
 		};
 	};
 
-	i2c@121D0000 {
-		status = "disabled";
-	};
-
-	dwmmc_0: dwmmc0@12200000 {
+	mmc_0: mmc@12200000 {
+		status = "okay";
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -405,14 +389,10 @@ slot@0 {
 		};
 	};
 
-	dwmmc_1: dwmmc1@12210000 {
-		status = "disabled";
-	};
-
-	dwmmc_2: dwmmc2@12220000 {
+	mmc_2: mmc@12220000 {
+		status = "okay";
 		num-slots = <1>;
 		supports-highspeed;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -428,26 +408,10 @@ slot@0 {
 		};
 	};
 
-	dwmmc_3: dwmmc3@12230000 {
-		status = "disabled";
-	};
-
 	i2s0: i2s@03830000 {
 		status = "okay";
 	};
 
-	spi_0: spi@12d20000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@12d30000 {
-		status = "disabled";
-	};
-
-	spi_2: spi@12d40000 {
-		status = "disabled";
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 

arch/arm/boot/dts/cros5250-common.dtsi → arch/arm/boot/dts/exynos5250-cros-common.dtsi

@@ -37,6 +37,7 @@ max77686_irq: max77686-irq {
 	};
 
 	i2c@12C60000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
 
@@ -185,6 +186,7 @@ buck8_reg: BUCK8 {
 	};
 
 	i2c@12C70000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
 
@@ -198,6 +200,7 @@ trackpad {
 	};
 
 	i2c@12C80000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 
@@ -208,30 +211,31 @@ hdmiddc@50 {
 	};
 
 	i2c@12C90000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 	};
 
 	i2c@12CA0000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 	};
 
 	i2c@12CB0000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 	};
 
-	i2c@12CC0000 {
-		status = "disabled";
-	};
-
 	i2c@12CD0000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
 	};
 
 	i2c@12CE0000 {
+		status = "okay";
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <378000>;
 
@@ -241,11 +245,10 @@ hdmiphy@38 {
 		};
 	};
 
-	dwmmc0@12200000 {
+	mmc@12200000 {
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -259,14 +262,9 @@ slot@0 {
 		};
 	};
 
-	dwmmc1@12210000 {
-		status = "disabled";
-	};
-
-	dwmmc2@12220000 {
+	mmc@12220000 {
 		num-slots = <1>;
 		supports-highspeed;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -281,11 +279,10 @@ slot@0 {
 		};
 	};
 
-	dwmmc3@12230000 {
+	mmc@12230000 {
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -298,19 +295,12 @@ slot@0 {
 		};
 	};
 
-	spi_0: spi@12d20000 {
-		status = "disabled";
-	};
-
 	spi_1: spi@12d30000 {
+		status = "okay";
 		samsung,spi-src-clk = <0>;
 		num-cs = <1>;
 	};
 
-	spi_2: spi@12d40000 {
-		status = "disabled";
-	};
-
 	hdmi {
 		hpd-gpio = <&gpx3 7 0>;
 	};

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -30,6 +30,7 @@ chosen {
 	i2c@12C60000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
+		status = "okay";
 
 		eeprom@50 {
 			compatible = "samsung,s524ad0xd1";
@@ -37,7 +38,7 @@ eeprom@50 {
 		};
 	};
 
-	vdd:fixed-regulator@0 {
+	vdd: fixed-regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-supply";
 		regulator-min-microvolt = <1800000>;
@@ -45,7 +46,7 @@ vdd:fixed-regulator@0 {
 		regulator-always-on;
 	};
 
-	dbvdd:fixed-regulator@1 {
+	dbvdd: fixed-regulator@1 {
 		compatible = "regulator-fixed";
 		regulator-name = "dbvdd-supply";
 		regulator-min-microvolt = <3300000>;
@@ -53,7 +54,7 @@ dbvdd:fixed-regulator@1 {
 		regulator-always-on;
 	};
 
-	spkvdd:fixed-regulator@2 {
+	spkvdd: fixed-regulator@2 {
 		compatible = "regulator-fixed";
 		regulator-name = "spkvdd-supply";
 		regulator-min-microvolt = <5000000>;
@@ -64,6 +65,7 @@ spkvdd:fixed-regulator@2 {
 	i2c@12C70000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
+		status = "okay";
 
 		eeprom@51 {
 			compatible = "samsung,s524ad0xd1";
@@ -77,6 +79,9 @@ wm8994: wm8994@1a {
 			gpio-controller;
 			#gpio-cells = <2>;
 
+			clocks = <&codec_mclk>;
+			clock-names = "MCLK1";
+
 			AVDD2-supply = <&vdd>;
 			CPVDD-supply = <&vdd>;
 			DBVDD-supply = <&dbvdd>;
@@ -89,6 +94,7 @@ i2c@121D0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <40000>;
 		samsung,i2c-slave-addr = <0x38>;
+		status = "okay";
 
 		sata-phy {
 			compatible = "samsung,sata-phy";
@@ -103,6 +109,7 @@ sata@122F0000 {
 	i2c@12C80000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
 
 		hdmiddc@50 {
 			compatible = "samsung,exynos4210-hdmiddc";
@@ -110,29 +117,10 @@ hdmiddc@50 {
 		};
 	};
 
-	i2c@12C90000 {
-		status = "disabled";
-	};
-
-	i2c@12CA0000 {
-		status = "disabled";
-	};
-
-	i2c@12CB0000 {
-		status = "disabled";
-	};
-
-	i2c@12CC0000 {
-		status = "disabled";
-	};
-
-	i2c@12CD0000 {
-		status = "disabled";
-	};
-
 	i2c@12CE0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
 
 		hdmiphy@38 {
 			compatible = "samsung,exynos4212-hdmiphy";
@@ -140,11 +128,11 @@ hdmiphy@38 {
 		};
 	};
 
-	dwmmc0@12200000 {
+	mmc@12200000 {
+		status = "okay";
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -158,14 +146,10 @@ slot@0 {
 		};
 	};
 
-	dwmmc1@12210000 {
-		status = "disabled";
-	};
-
-	dwmmc2@12220000 {
+	mmc@12220000 {
+		status = "okay";
 		num-slots = <1>;
 		supports-highspeed;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -180,15 +164,13 @@ slot@0 {
 		};
 	};
 
-	dwmmc3@12230000 {
-		status = "disabled";
-	};
-
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
 
 	spi_1: spi@12d30000 {
+		status = "okay";
+
 		w25q80bw@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -214,10 +196,6 @@ partition@40000 {
 		};
 	};
 
-	spi_2: spi@12d40000 {
-		status = "disabled";
-	};
-
 	hdmi {
 		hpd-gpio = <&gpx3 7 0>;
 	};
@@ -279,5 +257,11 @@ xxti {
 			compatible = "samsung,clock-xxti";
 			clock-frequency = <24000000>;
 		};
+
+		codec_mclk: codec-mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <16934000>;
+		};
 	};
 };

arch/arm/boot/dts/exynos5250-snow.dts

@@ -10,7 +10,7 @@
 
 /dts-v1/;
 #include "exynos5250.dtsi"
-#include "cros5250-common.dtsi"
+#include "exynos5250-cros-common.dtsi"
 
 / {
 	model = "Google Snow";
@@ -172,11 +172,20 @@ keyboard-controller {
 		};
 	};
 
+	mmc@12200000 {
+		status = "okay";
+	};
+
+	mmc@12220000 {
+		status = "okay";
+	};
+
 	/*
 	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
 	 * reduce EMI.
 	 */
-	dwmmc3@12230000 {
+	mmc@12230000 {
+		status = "okay";
 		slot@0 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;

arch/arm/boot/dts/exynos5250.dtsi

@@ -33,10 +33,10 @@ aliases {
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
-		mshc0 = &dwmmc_0;
-		mshc1 = &dwmmc_1;
-		mshc2 = &dwmmc_2;
-		mshc3 = &dwmmc_3;
+		mshc0 = &mmc_0;
+		mshc1 = &mmc_1;
+		mshc2 = &mmc_2;
+		mshc3 = &mmc_3;
 		i2c0 = &i2c_0;
 		i2c1 = &i2c_1;
 		i2c2 = &i2c_2;
@@ -244,6 +244,7 @@ i2c_0: i2c@12C60000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
+		status = "disabled";
 	};
 
 	i2c_1: i2c@12C70000 {
@@ -256,6 +257,7 @@ i2c_1: i2c@12C70000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
+		status = "disabled";
 	};
 
 	i2c_2: i2c@12C80000 {
@@ -268,6 +270,7 @@ i2c_2: i2c@12C80000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_bus>;
+		status = "disabled";
 	};
 
 	i2c_3: i2c@12C90000 {
@@ -280,6 +283,7 @@ i2c_3: i2c@12C90000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_bus>;
+		status = "disabled";
 	};
 
 	i2c_4: i2c@12CA0000 {
@@ -292,6 +296,7 @@ i2c_4: i2c@12CA0000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_bus>;
+		status = "disabled";
 	};
 
 	i2c_5: i2c@12CB0000 {
@@ -304,6 +309,7 @@ i2c_5: i2c@12CB0000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_bus>;
+		status = "disabled";
 	};
 
 	i2c_6: i2c@12CC0000 {
@@ -316,6 +322,7 @@ i2c_6: i2c@12CC0000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_bus>;
+		status = "disabled";
 	};
 
 	i2c_7: i2c@12CD0000 {
@@ -328,6 +335,7 @@ i2c_7: i2c@12CD0000 {
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_bus>;
+		status = "disabled";
 	};
 
 	i2c_8: i2c@12CE0000 {
@@ -338,6 +346,7 @@ i2c_8: i2c@12CE0000 {
 		#size-cells = <0>;
 		clocks = <&clock 302>;
 		clock-names = "i2c";
+		status = "disabled";
 	};
 
 	i2c@121D0000 {
@@ -347,10 +356,12 @@ i2c@121D0000 {
                 #size-cells = <0>;
 		clocks = <&clock 288>;
 		clock-names = "i2c";
+		status = "disabled";
 	};
 
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
+		status = "disabled";
 		reg = <0x12d20000 0x100>;
 		interrupts = <0 66 0>;
 		dmas = <&pdma0 5
@@ -366,6 +377,7 @@ spi_0: spi@12d20000 {
 
 	spi_1: spi@12d30000 {
 		compatible = "samsung,exynos4210-spi";
+		status = "disabled";
 		reg = <0x12d30000 0x100>;
 		interrupts = <0 67 0>;
 		dmas = <&pdma1 5
@@ -381,6 +393,7 @@ spi_1: spi@12d30000 {
 
 	spi_2: spi@12d40000 {
 		compatible = "samsung,exynos4210-spi";
+		status = "disabled";
 		reg = <0x12d40000 0x100>;
 		interrupts = <0 68 0>;
 		dmas = <&pdma0 7
@@ -394,25 +407,43 @@ spi_2: spi@12d40000 {
 		pinctrl-0 = <&spi2_bus>;
 	};
 
-	dwmmc_0: dwmmc0@12200000 {
+	mmc_0: mmc@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x12200000 0x1000>;
 		clocks = <&clock 280>, <&clock 139>;
 		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
 	};
 
-	dwmmc_1: dwmmc1@12210000 {
+	mmc_1: mmc@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x12210000 0x1000>;
 		clocks = <&clock 281>, <&clock 140>;
 		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
 	};
 
-	dwmmc_2: dwmmc2@12220000 {
+	mmc_2: mmc@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x12220000 0x1000>;
 		clocks = <&clock 282>, <&clock 141>;
 		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
 	};
 
-	dwmmc_3: dwmmc3@12230000 {
+	mmc_3: mmc@12230000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12230000 0x1000>;
 		interrupts = <0 78 0>;
@@ -420,6 +451,8 @@ dwmmc_3: dwmmc3@12230000 {
 		#size-cells = <0>;
 		clocks = <&clock 283>, <&clock 142>;
 		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
 	};
 
 	i2s0: i2s@03830000 {
@@ -528,6 +561,15 @@ usbphy-sys {
 		};
 	};
 
+	pwm: pwm@12dd0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12dd0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+		clocks = <&clock 311>;
+		clock-names = "timers";
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/exynos5420-arndale-octa.dts

+/*
+ * Samsung's Exynos5420 based Arndale Octa board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+	compatible = "insignal,arndale-octa", "samsung,exynos5420";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC3,115200";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	mmc@12200000 {
+		status = "okay";
+		broken-cd;
+		supports-highspeed;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <0 4>;
+		samsung,dw-mshc-ddr-timing = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	mmc@12220000 {
+		status = "okay";
+		supports-highspeed;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+		};
+	};
+};

arch/arm/boot/dts/exynos5420-smdk5420.dts

@@ -31,6 +31,39 @@ oscclk {
 		};
 	};
 
+	mmc@12200000 {
+		status = "okay";
+		broken-cd;
+		supports-highspeed;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <0 4>;
+		samsung,dw-mshc-ddr-timing = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	mmc@12220000 {
+		status = "okay";
+		supports-highspeed;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+		};
+	};
+
 	dp-controller@145B0000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&dp_hpd>;

arch/arm/boot/dts/exynos5420.dtsi

@@ -22,6 +22,9 @@ / {
 	compatible = "samsung,exynos5420";
 
 	aliases {
+		mshc0 = &mmc_0;
+		mshc1 = &mmc_1;
+		mshc2 = &mmc_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -31,6 +34,18 @@ aliases {
 		i2c1 = &i2c_1;
 		i2c2 = &i2c_2;
 		i2c3 = &i2c_3;
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		i2c8 = &hsi2c_8;
+		i2c9 = &hsi2c_9;
+		i2c10 = &hsi2c_10;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
 	};
 
 	cpus {
@@ -64,6 +79,34 @@ cpu3: cpu@3 {
 			reg = <0x3>;
 			clock-frequency = <1800000000>;
 		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+		};
 	};
 
 	clock: clock-controller@10010000 {
@@ -88,13 +131,50 @@ codec@11000000 {
 		clock-names = "mfc";
 	};
 
+	mmc_0: mmc@12200000 {
+		compatible = "samsung,exynos5420-dw-mshc-smu";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12200000 0x2000>;
+		clocks = <&clock 351>, <&clock 132>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mmc_1: mmc@12210000 {
+		compatible = "samsung,exynos5420-dw-mshc-smu";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12210000 0x2000>;
+		clocks = <&clock 352>, <&clock 133>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mmc_2: mmc@12220000 {
+		compatible = "samsung,exynos5420-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12220000 0x1000>;
+		clocks = <&clock 353>, <&clock 134>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
 		interrupt-controller;
 		#interrups-cells = <1>;
 		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+				<8>, <9>, <10>, <11>;
 		clocks = <&clock 1>, <&clock 315>;
 		clock-names = "fin_pll", "mct";
 
@@ -109,7 +189,11 @@ mct_map: mct-map {
 					<4 &gic 0 120 0>,
 					<5 &gic 0 121 0>,
 					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>;
+					<7 &gic 0 123 0>,
+					<8 &gic 0 128 0>,
+					<9 &gic 0 129 0>,
+					<10 &gic 0 130 0>,
+					<11 &gic 0 131 0>;
 		};
 	};
 
@@ -190,6 +274,106 @@ rtc@101E0000 {
 		status = "okay";
 	};
 
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@121A0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <0 34 0>;
+			clocks = <&clock 362>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121B0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <0 35 0>;
+			clocks = <&clock 363>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <0 33 0>;
+			clocks = <&clock 473>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11C10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <0 124 0>;
+			clocks = <&clock 442>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+	};
+
+	spi_0: spi@12d20000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x12d20000 0x100>;
+		interrupts = <0 66 0>;
+		dmas = <&pdma0 5
+			&pdma0 4>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
+		clocks = <&clock 271>, <&clock 135>;
+		clock-names = "spi", "spi_busclk0";
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x12d30000 0x100>;
+		interrupts = <0 67 0>;
+		dmas = <&pdma1 5
+			&pdma1 4>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+		clocks = <&clock 272>, <&clock 136>;
+		clock-names = "spi", "spi_busclk0";
+		status = "disabled";
+	};
+
+	spi_2: spi@12d40000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x12d40000 0x100>;
+		interrupts = <0 68 0>;
+		dmas = <&pdma0 7
+			&pdma0 6>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
+		clocks = <&clock 273>, <&clock 137>;
+		clock-names = "spi", "spi_busclk0";
+		status = "disabled";
+	};
+
 	serial@12C00000 {
 		clocks = <&clock 257>, <&clock 128>;
 		clock-names = "uart", "clk_uart_baud0";
@@ -210,6 +394,15 @@ serial@12C30000 {
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
+	pwm: pwm@12dd0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12dd0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+		clocks = <&clock 279>;
+		clock-names = "timers";
+	};
+
 	dp_phy: video-phy@10040728 {
 		compatible = "samsung,exynos5250-dp-video-phy";
 		reg = <0x10040728 4>;
@@ -292,6 +485,97 @@ i2c_3: i2c@12C90000 {
 		status = "disabled";
 	};
 
+	hsi2c_4: i2c@12CA0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CA0000 0x1000>;
+		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_hs_bus>;
+		clocks = <&clock 265>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_5: i2c@12CB0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CB0000 0x1000>;
+		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_hs_bus>;
+		clocks = <&clock 266>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_6: i2c@12CC0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CC0000 0x1000>;
+		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_hs_bus>;
+		clocks = <&clock 267>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_7: i2c@12CD0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CD0000 0x1000>;
+		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_hs_bus>;
+		clocks = <&clock 268>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_8: i2c@12E00000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E00000 0x1000>;
+		interrupts = <0 87 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_hs_bus>;
+		clocks = <&clock 281>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_9: i2c@12E10000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E10000 0x1000>;
+		interrupts = <0 88 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c9_hs_bus>;
+		clocks = <&clock 282>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_10: i2c@12E20000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E20000 0x1000>;
+		interrupts = <0 203 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c10_hs_bus>;
+		clocks = <&clock 283>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
 	hdmi@14530000 {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
@@ -310,4 +594,62 @@ mixer@14450000 {
 		clocks = <&clock 431>, <&clock 143>;
 		clock-names = "mixer", "sclk_hdmi";
 	};
+
+	gsc_0: video-scaler@13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+		clocks = <&clock 465>;
+		clock-names = "gscl";
+		samsung,power-domain = <&gsc_pd>;
+	};
+
+	gsc_1: video-scaler@13e10000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e10000 0x1000>;
+		interrupts = <0 86 0>;
+		clocks = <&clock 466>;
+		clock-names = "gscl";
+		samsung,power-domain = <&gsc_pd>;
+	};
+
+	tmu_cpu0: tmu@10060000 {
+		compatible = "samsung,exynos5420-tmu";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 65 0>;
+		clocks = <&clock 318>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmu_cpu1: tmu@10064000 {
+		compatible = "samsung,exynos5420-tmu";
+		reg = <0x10064000 0x100>;
+		interrupts = <0 183 0>;
+		clocks = <&clock 318>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmu_cpu2: tmu@10068000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+		interrupts = <0 184 0>;
+		clocks = <&clock 318>, <&clock 318>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+	tmu_cpu3: tmu@1006c000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+		interrupts = <0 185 0>;
+		clocks = <&clock 318>, <&clock 319>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+	tmu_gpu: tmu@100a0000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+		interrupts = <0 215 0>;
+		clocks = <&clock 319>, <&clock 318>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -29,7 +29,7 @@ clock: clock-controller@160000 {
 		#clock-cells = <1>;
 	};
 
-	gic:interrupt-controller@2E0000 {
+	gic: interrupt-controller@2E0000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;

arch/arm/boot/dts/integrator.dtsi

@@ -10,6 +10,11 @@ core-module@10000000 {
 		reg = <0x10000000 0x200>;
 	};
 
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
 	timer@13000000 {
 		reg = <0x13000000 0x100>;
 		interrupt-parent = <&pic>;

arch/arm/boot/dts/k2hk-evm.dts

+/*
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+
+/ {
+	compatible =  "ti,keystone-evm";
+
+	soc {
+		clock {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkarm: refclkarm {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <125000000>;
+				clock-output-names = "refclk-arm";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+
+			refclkddr3b: refclkddr3b {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3b";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};

arch/arm/boot/dts/keystone-clocks.dtsi

@@ -13,17 +13,10 @@ clocks {
 	#size-cells = <1>;
 	ranges;
 
-	refclkmain: refclkmain {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <122880000>;
-		clock-output-names = "refclk-main";
-	};
-
 	mainpllclk: mainpllclk@2310110 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclksys>;
 		reg = <0x02620350 4>, <0x02310110 4>;
 		reg-names = "control", "multiplier";
 		fixed-postdiv = <2>;
@@ -32,47 +25,43 @@ mainpllclk: mainpllclk@2310110 {
 	papllclk: papllclk@2620358 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclkpass>;
 		clock-output-names = "pa-pll-clk";
 		reg = <0x02620358 4>;
 		reg-names = "control";
-		fixed-postdiv = <6>;
 	};
 
-	ddr3allclk: ddr3apllclk@2620360 {
+	ddr3apllclk: ddr3apllclk@2620360 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclkddr3a>;
 		clock-output-names = "ddr-3a-pll-clk";
 		reg = <0x02620360 4>;
 		reg-names = "control";
-		fixed-postdiv = <6>;
 	};
 
-	ddr3bllclk: ddr3bpllclk@2620368 {
+	ddr3bpllclk: ddr3bpllclk@2620368 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclkddr3b>;
 		clock-output-names = "ddr-3b-pll-clk";
 		reg = <0x02620368 4>;
 		reg-names = "control";
-		fixed-postdiv = <6>;
 	};
 
 	armpllclk: armpllclk@2620370 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclkarm>;
 		clock-output-names = "arm-pll-clk";
 		reg = <0x02620370 4>;
 		reg-names = "control";
-		fixed-postdiv = <6>;
 	};
 
 	mainmuxclk: mainmuxclk@2310108 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-mux-clock";
-		clocks = <&mainpllclk>, <&refclkmain>;
+		clocks = <&mainpllclk>, <&refclksys>;
 		reg = <0x02310108 4>;
 		bit-shift = <23>;
 		bit-mask = <1>;
@@ -135,6 +124,15 @@ chipclk13: chipclk13 {
 		clock-output-names = "chipclk13";
 	};
 
+	paclk13: paclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&papllclk>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "paclk13";
+	};
+
 	chipclk14: chipclk14 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";

arch/arm/boot/dts/keystone.dts → arch/arm/boot/dts/keystone.dtsi

@@ -6,14 +6,12 @@
  * published by the Free Software Foundation.
  */
 
-/dts-v1/;
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include "skeleton.dtsi"
 
 / {
 	model = "Texas Instruments Keystone 2 SoC";
-	compatible =  "ti,keystone-evm";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -64,7 +62,11 @@ gic: interrupt-controller {
 		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x02561000 0x0 0x1000>,
-		      <0x0 0x02562000 0x0 0x2000>;
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x1000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	timer {
@@ -179,5 +181,32 @@ spi2: spi@21000800 {
 			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clkspi>;
 		};
+
+		usb_phy: usb_phy@2620738 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620738 32>;
+			status = "disabled";
+		};
+
+		usb: usb@2680000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2680000 0x10000>;
+			clocks = <&clkusb>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			status = "disabled";
+
+			dwc3@2690000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x2690000 0x70000>;
+				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb_phy>, <&usb_phy>;
+			};
+		};
 	};
 };

arch/arm/boot/dts/kirkwood-6281.dtsi

@@ -89,6 +89,8 @@ sata@80000 {
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
 			status = "disabled";
 		};
 
@@ -97,6 +99,8 @@ mvsdio@90000 {
 			reg = <0x90000 0x200>;
 			interrupts = <28>;
 			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
 			bus-width = <4>;
 			cap-sdio-irq;
 			cap-sd-highspeed;

arch/arm/boot/dts/kirkwood-cloudbox.dts

@@ -66,8 +66,8 @@ gpio_keys {
 
 		button@1 {
 			label = "Power push button";
-			linux,code = <116>;
-			gpios = <&gpio0 16 1>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -76,17 +76,17 @@ gpio-leds {
 
 		red-fail {
 			label = "cloudbox:red:fail";
-			gpios = <&gpio0 14 0>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
 		blue-sata {
 			label = "cloudbox:blue:sata";
-			gpios = <&gpio0 15 0>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
-		gpios = <&gpio0 17 0>;
+		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 	};
 };
 

arch/arm/boot/dts/kirkwood-db.dtsi

@@ -51,8 +51,8 @@ ehci@50000 {
 		mvsdio@90000 {
 			pinctrl-0 = <&pmx_sdio_gpios>;
 			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 0>;
-			cd-gpios = <&gpio1 6 0>;
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			status = "okay";
 		};
 	};