Commit 9bb0a9e0 authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Lee Jones

leds: leds-mt6323: Add support for WLEDs and MT6332

Add basic code to turn on and off WLEDs and wire up MT6332 support
to take advantage of it.
This is a simple approach due to the aforementioned PMIC supporting
only on/off status so, at the time of writing, it is impossible for me
to validate more advanced functionality due to lack of hardware.
Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: default avatarLee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230601110813.2373764-9-angelogioacchino.delregno@collabora.com
parent 9540989c
......@@ -20,6 +20,11 @@
#define RG_DRV_32K_CK_PDN BIT(11)
#define RG_DRV_32K_CK_PDN_MASK BIT(11)
/* 32K/1M/6M clock common for WLED device */
#define RG_VWLED_1M_CK_PDN BIT(0)
#define RG_VWLED_32K_CK_PDN BIT(12)
#define RG_VWLED_6M_CK_PDN BIT(13)
/*
* Register field for TOP_CKPDN2 to enable
* individual clock for LED device.
......@@ -71,7 +76,7 @@ struct mt6323_led {
int id;
struct mt6323_leds *parent;
struct led_classdev cdev;
enum led_brightness current_brightness;
unsigned int current_brightness;
};
/**
......@@ -84,6 +89,7 @@ struct mt6323_led {
* @num_isink_con: Number of ISINKx_CON registers
* @isink_max_regs: Number of ISINK[0..x] registers
* @isink_en_ctrl: Offset to ISINK_EN_CTRL register
* @iwled_en_ctrl: Offset to IWLED_EN_CTRL register
*/
struct mt6323_regs {
const u16 *top_ckpdn;
......@@ -94,18 +100,21 @@ struct mt6323_regs {
u8 num_isink_con;
u8 isink_max_regs;
u16 isink_en_ctrl;
u16 iwled_en_ctrl;
};
/**
* struct mt6323_hwspec - hardware specific parameters
* @max_period: Maximum period for all LEDs
* @max_leds: Maximum number of supported LEDs
* @max_wleds: Maximum number of WLEDs
* @max_brightness: Maximum brightness for all LEDs
* @unit_duty: Steps of duty per period
*/
struct mt6323_hwspec {
u16 max_period;
u8 max_leds;
u8 max_wleds;
u16 max_brightness;
u16 unit_duty;
};
......@@ -377,6 +386,117 @@ static int mt6323_led_set_brightness(struct led_classdev *cdev,
return ret;
}
static int mtk_wled_hw_on(struct led_classdev *cdev)
{
struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
struct mt6323_leds *leds = led->parent;
const struct mt6323_regs *regs = leds->pdata->regs;
struct regmap *regmap = leds->hw->regmap;
int ret;
ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_32K_CK_PDN);
if (ret)
return ret;
ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_6M_CK_PDN);
if (ret)
return ret;
ret = regmap_clear_bits(regmap, regs->top_ckpdn[0], RG_VWLED_1M_CK_PDN);
if (ret)
return ret;
usleep_range(5000, 6000);
/* Enable WLED channel pair */
ret = regmap_set_bits(regmap, regs->iwled_en_ctrl, BIT(led->id));
if (ret)
return ret;
ret = regmap_set_bits(regmap, regs->iwled_en_ctrl, BIT(led->id + 1));
if (ret)
return ret;
return 0;
}
static int mtk_wled_hw_off(struct led_classdev *cdev)
{
struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
struct mt6323_leds *leds = led->parent;
const struct mt6323_regs *regs = leds->pdata->regs;
struct regmap *regmap = leds->hw->regmap;
int ret;
ret = regmap_clear_bits(regmap, regs->iwled_en_ctrl, BIT(led->id + 1));
if (ret)
return ret;
ret = regmap_clear_bits(regmap, regs->iwled_en_ctrl, BIT(led->id));
if (ret)
return ret;
ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_32K_CK_PDN);
if (ret)
return ret;
ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_6M_CK_PDN);
if (ret)
return ret;
ret = regmap_set_bits(regmap, regs->top_ckpdn[0], RG_VWLED_1M_CK_PDN);
if (ret)
return ret;
return 0;
}
static unsigned int mt6323_get_wled_brightness(struct led_classdev *cdev)
{
struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
struct mt6323_leds *leds = led->parent;
const struct mt6323_regs *regs = leds->pdata->regs;
struct regmap *regmap = leds->hw->regmap;
unsigned int status;
int ret;
ret = regmap_read(regmap, regs->iwled_en_ctrl, &status);
if (ret)
return 0;
/* Always two channels per WLED */
status &= BIT(led->id) | BIT(led->id + 1);
return status ? led->current_brightness : 0;
}
static int mt6323_wled_set_brightness(struct led_classdev *cdev,
unsigned int brightness)
{
struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev);
struct mt6323_leds *leds = led->parent;
int ret = 0;
mutex_lock(&leds->lock);
if (brightness) {
if (!led->current_brightness)
ret = mtk_wled_hw_on(cdev);
if (ret)
goto out;
} else {
ret = mtk_wled_hw_off(cdev);
if (ret)
goto out;
}
led->current_brightness = brightness;
out:
mutex_unlock(&leds->lock);
return ret;
}
static int mt6323_led_set_dt_default(struct led_classdev *cdev,
struct device_node *np)
{
......@@ -416,6 +536,7 @@ static int mt6323_led_probe(struct platform_device *pdev)
int ret;
unsigned int status;
u32 reg;
u8 max_leds;
leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
if (!leds)
......@@ -426,6 +547,7 @@ static int mt6323_led_probe(struct platform_device *pdev)
leds->pdata = device_get_match_data(dev);
regs = leds->pdata->regs;
spec = leds->pdata->spec;
max_leds = spec->max_leds + spec->max_wleds;
/*
* leds->hw points to the underlying bus for the register
......@@ -445,6 +567,7 @@ static int mt6323_led_probe(struct platform_device *pdev)
for_each_available_child_of_node(np, child) {
struct led_init_data init_data = {};
bool is_wled;
ret = of_property_read_u32(child, "reg", &reg);
if (ret) {
......@@ -452,7 +575,7 @@ static int mt6323_led_probe(struct platform_device *pdev)
goto put_child_node;
}
if (reg >= spec->max_leds || reg >= MAX_SUPPORTED_LEDS ||
if (reg >= max_leds || reg >= MAX_SUPPORTED_LEDS ||
leds->led[reg]) {
dev_err(dev, "Invalid led reg %u\n", reg);
ret = -EINVAL;
......@@ -465,14 +588,24 @@ static int mt6323_led_probe(struct platform_device *pdev)
goto put_child_node;
}
is_wled = of_property_read_bool(child, "mediatek,is-wled");
leds->led[reg] = led;
leds->led[reg]->id = reg;
leds->led[reg]->cdev.max_brightness = spec->max_brightness;
leds->led[reg]->cdev.brightness_set_blocking =
mt6323_led_set_brightness;
leds->led[reg]->cdev.blink_set = mt6323_led_set_blink;
leds->led[reg]->cdev.brightness_get =
mt6323_get_led_hw_brightness;
if (is_wled) {
leds->led[reg]->cdev.brightness_set_blocking =
mt6323_wled_set_brightness;
leds->led[reg]->cdev.brightness_get =
mt6323_get_wled_brightness;
} else {
leds->led[reg]->cdev.brightness_set_blocking =
mt6323_led_set_brightness;
leds->led[reg]->cdev.blink_set = mt6323_led_set_blink;
leds->led[reg]->cdev.brightness_get =
mt6323_get_led_hw_brightness;
}
leds->led[reg]->parent = leds;
ret = mt6323_led_set_dt_default(&leds->led[reg]->cdev, child);
......@@ -540,6 +673,17 @@ static const struct mt6323_regs mt6331_registers = {
.isink_en_ctrl = 0x43a,
};
static const struct mt6323_regs mt6332_registers = {
.top_ckpdn = (const u16[]){ 0x8094, 0x809a, 0x80a0 },
.num_top_ckpdn = 3,
.top_ckcon = (const u16[]){ 0x80a6, 0x80ac },
.num_top_ckcon = 2,
.isink_con = (const u16[]){ 0x8cd4 },
.num_isink_con = 1,
.isink_max_regs = 12, /* IWLED[0..2, 3..9] */
.iwled_en_ctrl = 0x8cda,
};
static const struct mt6323_hwspec mt6323_spec = {
.max_period = 10000,
.max_leds = 4,
......@@ -547,6 +691,13 @@ static const struct mt6323_hwspec mt6323_spec = {
.unit_duty = 3125,
};
static const struct mt6323_hwspec mt6332_spec = {
/* There are no LEDs in MT6332. Only WLEDs are present. */
.max_leds = 0,
.max_wleds = 1,
.max_brightness = 1024,
};
static const struct mt6323_data mt6323_pdata = {
.regs = &mt6323_registers,
.spec = &mt6323_spec,
......@@ -557,9 +708,15 @@ static const struct mt6323_data mt6331_pdata = {
.spec = &mt6323_spec,
};
static const struct mt6323_data mt6332_pdata = {
.regs = &mt6332_registers,
.spec = &mt6332_spec,
};
static const struct of_device_id mt6323_led_dt_match[] = {
{ .compatible = "mediatek,mt6323-led", .data = &mt6323_pdata},
{ .compatible = "mediatek,mt6331-led", .data = &mt6331_pdata },
{ .compatible = "mediatek,mt6332-led", .data = &mt6332_pdata },
{},
};
MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment