Commit 9bd0bd26 authored by Chuanhong Guo's avatar Chuanhong Guo Committed by Thomas Bogendoerfer

MIPS: ralink: drop ralink_clk_init for mt7621

ralink_clk_init is only called in arch/mips/ralink/clk.c which isn't
compiled for mt7621. And it doesn't export a proper cpu clock.
Drop this unused function.
Signed-off-by: default avatarChuanhong Guo <gch981213@gmail.com>
Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
parent 38950069
...@@ -20,11 +20,6 @@ ...@@ -20,11 +20,6 @@
#include "common.h" #include "common.h"
#define SYSC_REG_SYSCFG 0x10
#define SYSC_REG_CPLL_CLKCFG0 0x2c
#define SYSC_REG_CUR_CLK_STS 0x44
#define CPU_CLK_SEL (BIT(30) | BIT(31))
#define MT7621_GPIO_MODE_UART1 1 #define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2 #define MT7621_GPIO_MODE_I2C 2
#define MT7621_GPIO_MODE_UART3_MASK 0x3 #define MT7621_GPIO_MODE_UART3_MASK 0x3
...@@ -115,44 +110,6 @@ phys_addr_t mips_cpc_default_phys_base(void) ...@@ -115,44 +110,6 @@ phys_addr_t mips_cpc_default_phys_base(void)
panic("Cannot detect cpc address"); panic("Cannot detect cpc address");
} }
void __init ralink_clk_init(void)
{
int cpu_fdiv = 0;
int cpu_ffrac = 0;
int fbdiv = 0;
u32 clk_sts, syscfg;
u8 clk_sel = 0, xtal_mode;
u32 cpu_clk;
if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
clk_sel = 1;
switch (clk_sel) {
case 0:
clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
cpu_fdiv = ((clk_sts >> 8) & 0x1F);
cpu_ffrac = (clk_sts & 0x1F);
cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
break;
case 1:
fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
xtal_mode = (syscfg >> 6) & 0x7;
if (xtal_mode >= 6) {
/* 25Mhz Xtal */
cpu_clk = 25 * fbdiv * 1000 * 1000;
} else if (xtal_mode >= 3) {
/* 40Mhz Xtal */
cpu_clk = 40 * fbdiv * 1000 * 1000;
} else {
/* 20Mhz Xtal */
cpu_clk = 20 * fbdiv * 1000 * 1000;
}
break;
}
}
void __init ralink_of_remap(void) void __init ralink_of_remap(void)
{ {
rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment