Merge tag 'gpio-v5.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "I don't really like to send so many fixes at the very last minute, but
  the bug-sport activity is unpredictable.

  Four fixes, three are -stable material that will go everywhere, one is
  for the current cycle:

   - An ACPI DSDT error fixup of the type we always see and Hans
     invariably gets to fix.

   - A OF quirk fix for the current release (v5.3)

   - Some consistency checks on the userspace ABI.

   - A memory leak"

* tag 'gpio-v5.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist
  gpiolib: of: fix fallback quirks handling
  gpio: fix line flag validation in lineevent_create
  gpio: fix line flag validation in linehandle_create
  gpio: mockup: add missing single_release()

drivers/gpio/gpio-mockup.c

@@ -309,6 +309,7 @@ static const struct file_operations gpio_mockup_debugfs_ops = {
 	.read = gpio_mockup_debugfs_read,
 	.write = gpio_mockup_debugfs_write,
 	.llseek = no_llseek,
+	.release = single_release,
 };
 
 static void gpio_mockup_debugfs_setup(struct device *dev,

drivers/gpio/gpiolib-acpi.c

@@ -7,6 +7,7 @@
  *          Mika Westerberg <mika.westerberg@linux.intel.com>
  */
 
+#include <linux/dmi.h>
 #include <linux/errno.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/driver.h>
@@ -19,6 +20,11 @@
 
 #include "gpiolib.h"
 
+static int run_edge_events_on_boot = -1;
+module_param(run_edge_events_on_boot, int, 0444);
+MODULE_PARM_DESC(run_edge_events_on_boot,
+		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
+
 /**
  * struct acpi_gpio_event - ACPI GPIO event handler data
  *
@@ -170,10 +176,13 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio,
 	event->irq_requested = true;
 
 	/* Make sure we trigger the initial state of edge-triggered IRQs */
-	value = gpiod_get_raw_value_cansleep(event->desc);
-	if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
-	    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
-		event->handler(event->irq, event);
+	if (run_edge_events_on_boot &&
+	    (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) {
+		value = gpiod_get_raw_value_cansleep(event->desc);
+		if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
+		    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
+			event->handler(event->irq, event);
+	}
 }
 
 static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
@@ -1283,3 +1292,28 @@ static int acpi_gpio_handle_deferred_request_irqs(void)
 }
 /* We must use _sync so that this runs after the first deferred_probe run */
 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
+
+static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+		}
+	},
+	{} /* Terminating entry */
+};
+
+static int acpi_gpio_setup_params(void)
+{
+	if (run_edge_events_on_boot < 0) {
+		if (dmi_check_system(run_edge_events_on_boot_blacklist))
+			run_edge_events_on_boot = 0;
+		else
+			run_edge_events_on_boot = 1;
+	}
+
+	return 0;
+}
+
+/* Directly after dmi_setup() which runs as core_initcall() */
+postcore_initcall(acpi_gpio_setup_params);

drivers/gpio/gpiolib-of.c

@@ -343,36 +343,27 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
 
 		desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx,
 						&of_flags);
-		/*
-		 * -EPROBE_DEFER in our case means that we found a
-		 * valid GPIO property, but no controller has been
-		 * registered so far.
-		 *
-		 * This means we don't need to look any further for
-		 * alternate name conventions, and we should really
-		 * preserve the return code for our user to be able to
-		 * retry probing later.
-		 */
-		if (IS_ERR(desc) && PTR_ERR(desc) == -EPROBE_DEFER)
-			return desc;
 
-		if (!IS_ERR(desc) || (PTR_ERR(desc) != -ENOENT))
+		if (!IS_ERR(desc) || PTR_ERR(desc) != -ENOENT)
 			break;
 	}
 
-	/* Special handling for SPI GPIOs if used */
-	if (IS_ERR(desc))
+	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+		/* Special handling for SPI GPIOs if used */
 		desc = of_find_spi_gpio(dev, con_id, &of_flags);
-	if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER) {
+	}
+
+	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
 		/* This quirk looks up flags and all */
 		desc = of_find_spi_cs_gpio(dev, con_id, idx, flags);
 		if (!IS_ERR(desc))
 			return desc;
 	}
 
-	/* Special handling for regulator GPIOs if used */
-	if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER)
+	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+		/* Special handling for regulator GPIOs if used */
 		desc = of_find_regulator_gpio(dev, con_id, &of_flags);
+	}
 
 	if (IS_ERR(desc))
 		return desc;

drivers/gpio/gpiolib.c

@@ -535,6 +535,14 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 	if (lflags & ~GPIOHANDLE_REQUEST_VALID_FLAGS)
 		return -EINVAL;
 
+	/*
+	 * Do not allow both INPUT & OUTPUT flags to be set as they are
+	 * contradictory.
+	 */
+	if ((lflags & GPIOHANDLE_REQUEST_INPUT) &&
+	    (lflags & GPIOHANDLE_REQUEST_OUTPUT))
+		return -EINVAL;
+
 	/*
 	 * Do not allow OPEN_SOURCE & OPEN_DRAIN flags in a single request. If
 	 * the hardware actually supports enabling both at the same time the
@@ -926,7 +934,9 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	}
 
 	/* This is just wrong: we don't look for events on output lines */
-	if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+	if ((lflags & GPIOHANDLE_REQUEST_OUTPUT) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)) {
 		ret = -EINVAL;
 		goto out_free_label;
 	}
@@ -940,10 +950,6 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 
 	if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
-	if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
-		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
-	if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
-		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 
 	ret = gpiod_direction_input(desc);
 	if (ret)