arm64: dts: ti: k3-j721e: Add overlay for J721E Infotainment Expansion Board

J721E common processor board can be interfaced with the infotainment
expansion board[0] to enable the following audio/video interfaces in
addition to the peripherals provided by the common processor board:
- Two Audio codecs each with three Stereo Inputs and four Stereo Outputs
- Audio input over FPD Link III
- Digital Audio Interface TX/RX
- HDMI/FPD LINK III Display out
- LI/OV Camera input

Add support for TFP410 HDMI bridge located on the Infotainment Expansion
Board (connected to J46 & J51).
Add a HDMI connector node and connect the endpoints as below:
DSS => TFP410 bridge => HDMI connector
Also add the pinmux data and board muxes for DPI.

Rest of the peripherals are not added as of now.

[0]: <https://www.ti.com/lit/ug/spruit0a/spruit0a.pdf>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[j-choudhary@ti.com: minor cleanup]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240613093706.480700-1-j-choudhary@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/Makefile

@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb
 # Boards with J721e SoC
 k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
@@ -154,6 +155,8 @@ k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-am69-sk-csi2-dual-imx219-dtbs := k3-am69-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
+k3-j721e-common-proc-board-infotainment-dtbs := k3-j721e-common-proc-board.dtb \
+	k3-j721e-common-proc-board-infotainment.dtbo
 k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-evm-pcie0-ep.dtbo
 k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
@@ -185,6 +188,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
 	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
 	k3-am69-sk-csi2-dual-imx219.dtb \
+	k3-j721e-common-proc-board-infotainment.dtb \
 	k3-j721e-evm-pcie0-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
 	k3-j721s2-evm-pcie1-ep.dtb \

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board-infotainment.dtso

+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Infotainment Expansion Board for j721e-evm
+ * User Guide: <https://www.ti.com/lit/ug/spruit0a/spruit0a.pdf>
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&main_i2c1>;
+		digital;
+		/* P12 - HDMI_HPD */
+		hpd-gpios = <&exp6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-bridge {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,tfp410";
+		/* P10 - HDMI_PDn */
+		powerdown-gpios = <&exp6 8 GPIO_ACTIVE_LOW>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint {
+				remote-endpoint = <&dpi_out0>;
+				pclk-sample = <1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint {
+				remote-endpoint =
+					<&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_i2c1_exp6_pins_default: main-i2c1-exp6-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x264, PIN_INPUT, 7) /* (T29) MMC2_DAT2.GPIO1_24 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */
+			J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */
+			J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */
+			J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */
+			J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */
+			J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */
+			J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */
+			J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */
+			J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23)  PRG1_PRU1_GPO8.VOUT0_DATA8 */
+			J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */
+			J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */
+			J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */
+			J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */
+			J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */
+			J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */
+			J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */
+			J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */
+			J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */
+			J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */
+			J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */
+			J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */
+			J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */
+			J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */
+			J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */
+			J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */
+			J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */
+			J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */
+		>;
+	};
+};
+
+&exp1 {
+	p14-hog {
+		/* P14 - VINOUT_MUX_SEL0 */
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "VINOUT_MUX_SEL0";
+	};
+
+	p15-hog {
+		/* P15 - VINOUT_MUX_SEL1 */
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "VINOUT_MUX_SEL1";
+	};
+};
+
+&main_i2c1 {
+	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	exp6: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp6_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		p11-hog {
+			/* P11 - HDMI_DDC_OE */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HDMI_DDC_OE";
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+
+		dpi_out0: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};