ARM: PL08x: prefix hex numbers with 0x

A driver which emits both decimal and hex numbers in its printk
creates confusion as to what is what.  Prefix hex numbers with 0x.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/dma/amba-pl08x.c

@@ -199,8 +199,8 @@ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x,
 		;
 
 	dev_vdbg(&pl08x->adev->dev,
-		"WRITE channel %d: csrc=%08x, cdst=%08x, "
-		 "cctl=%08x, clli=%08x, ccfg=%08x\n",
+		"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+		 "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n",
 		ch->id,
 		ch->csrc,
 		ch->cdst,
@@ -731,7 +731,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 		while (remainder) {
 			dev_vdbg(&pl08x->adev->dev,
 				 "%s single byte LLIs for a transfer of "
-				 "less than a bus width (remain %08x)\n",
+				 "less than a bus width (remain 0x%08x)\n",
 				 __func__, remainder);
 			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
 			num_llis =
@@ -747,7 +747,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 		while ((mbus->addr) % (mbus->buswidth)) {
 			dev_vdbg(&pl08x->adev->dev,
 				"%s adjustment lli for less than bus width "
-				 "(remain %08x)\n",
+				 "(remain 0x%08x)\n",
 				 __func__, remainder);
 			cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
 			num_llis = pl08x_fill_lli_for_desc
@@ -865,7 +865,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 				if (target_len != lli_len) {
 					dev_vdbg(&pl08x->adev->dev,
-					"%s can't send what we want. Desired %08x, lli of %08x bytes in txd of %08x\n",
+					"%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n",
 					__func__, target_len, lli_len, txd->len);
 				}
 
@@ -875,7 +875,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 						       tsize);
 
 				dev_vdbg(&pl08x->adev->dev,
-					"%s fill lli with single lli chunk of size %08x (remainder %08x)\n",
+					"%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n",
 					__func__, lli_len, remainder);
 				num_llis = pl08x_fill_lli_for_desc(pl08x, txd,
 						num_llis, lli_len, cctl,
@@ -894,7 +894,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 						&& (remainder); j++) {
 					cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
 					dev_vdbg(&pl08x->adev->dev,
-						"%s align with boundary, single byte (remain %08x)\n",
+						"%s align with boundary, single byte (remain 0x%08x)\n",
 						__func__, remainder);
 					num_llis =
 						pl08x_fill_lli_for_desc(pl08x,
@@ -979,7 +979,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 
 		for (i = 0; i < num_llis; i++) {
 			dev_vdbg(&pl08x->adev->dev,
-				 "lli %d @%p: csrc=%08x, cdst=%08x, cctl=%08x, clli=%08x\n",
+				 "lli %d @%p: csrc=0x%08x, cdst=0x%08x, cctl=0x%08x, clli=0x%08x\n",
 				 i,
 				 &llis_va[i],
 				 llis_va[i].src,
@@ -1289,7 +1289,7 @@ static void dma_set_runtime_config(struct dma_chan *chan,
 
 	dev_dbg(&pl08x->adev->dev,
 		"configured channel %s (%s) for %s, data width %d, "
-		"maxburst %d words, LE, CCTL=%08x, CCFG=%08x\n",
+		"maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n",
 		dma_chan_name(chan), plchan->name,
 		(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
 		addr_width,