ARM: prima2: remove duplicate v7_invalidate_l1

Patch c08e20d2 "arm: Add v7_invalidate_l1 to cache-v7.S" added
a generic version of this function and removed all platform
specific versions, while 4898de3d "ARM: PRIMA2: add new SiRFmarco
SMP SoC infrastructures" added another one, leading to a link
error. I verified that the two are identical, so we can
just remove the one in mach-prima2.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-prima2/headsmp.S

@@ -11,46 +11,6 @@
 
 	__CPUINIT
 
-/*
- * Cold boot and hardware reset show different behaviour,
- * system will be always panic if we warm-reset the board
- * Here we invalidate L1 of CPU1 to make sure there isn't
- * uninitialized data written into memory later
- */
-ENTRY(v7_invalidate_l1)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 2, r0, c0, c0, 0
-	mrc	p15, 1, r0, c0, c0, 0
-
-	ldr	r1, =0x7fff
-	and	r2, r1, r0, lsr #13
-
-	ldr	r1, =0x3ff
-
-	and	r3, r1, r0, lsr #3	@ NumWays - 1
-	add	r2, r2, #1		@ NumSets
-
-	and	r0, r0, #0x7
-	add	r0, r0, #4	@ SetShift
-
-	clz	r1, r3		@ WayShift
-	add	r4, r3, #1	@ NumWays
-1:	sub	r2, r2, #1	@ NumSets--
-	mov	r3, r4		@ Temp = NumWays
-2:	subs	r3, r3, #1	@ Temp--
-	mov	r5, r3, lsl r1
-	mov	r6, r2, lsl r0
-	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-	mcr	p15, 0, r5, c7, c6, 2
-	bgt	2b
-	cmp	r2, #0
-	bgt	1b
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(v7_invalidate_l1)
-
 /*
  * SIRFSOC specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're