Merge branch 'acpica'

Merge ACPICA updates for 5.16-rc1:

 - Fix system-wide resume issue caused by evaluating control methods
   too early in the resume path (Rafael Wysocki).

 - Add support for Windows 2020 _OSI string (Mario Limonciello).

 - Add Generic Port Affinity type for SRAT (Alison Schofield).

 - Add disassembly support for the NHLT ACPI table (Bob Moore).

* acpica:
  ACPICA: Update version to 20210930
  ACPICA: iASL table disassembler: Added disassembly support for the NHLT ACPI table
  ACPICA: ACPI 6.4 SRAT: add Generic Port Affinity type
  ACPICA: Add support for Windows 2020 _OSI string
  ACPICA: Avoid evaluating methods too early during system resume

drivers/acpi/acpica/acglobal.h

@@ -226,6 +226,8 @@ extern struct acpi_bit_register_info
     acpi_gbl_bit_register_info[ACPI_NUM_BITREG];
 ACPI_GLOBAL(u8, acpi_gbl_sleep_type_a);
 ACPI_GLOBAL(u8, acpi_gbl_sleep_type_b);
+ACPI_GLOBAL(u8, acpi_gbl_sleep_type_a_s0);
+ACPI_GLOBAL(u8, acpi_gbl_sleep_type_b_s0);
 
 /*****************************************************************************
  *

drivers/acpi/acpica/hwesleep.c

@@ -147,17 +147,13 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
 
 acpi_status acpi_hw_extended_wake_prep(u8 sleep_state)
 {
-	acpi_status status;
 	u8 sleep_type_value;
 
 	ACPI_FUNCTION_TRACE(hw_extended_wake_prep);
 
-	status = acpi_get_sleep_type_data(ACPI_STATE_S0,
-					  &acpi_gbl_sleep_type_a,
-					  &acpi_gbl_sleep_type_b);
-	if (ACPI_SUCCESS(status)) {
+	if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) {
 		sleep_type_value =
-		    ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
+		    ((acpi_gbl_sleep_type_a_s0 << ACPI_X_SLEEP_TYPE_POSITION) &
 		     ACPI_X_SLEEP_TYPE_MASK);
 
 		(void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),

drivers/acpi/acpica/hwsleep.c

@@ -179,7 +179,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
 
 acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
 {
-	acpi_status status;
+	acpi_status status = AE_OK;
 	struct acpi_bit_register_info *sleep_type_reg_info;
 	struct acpi_bit_register_info *sleep_enable_reg_info;
 	u32 pm1a_control;
@@ -192,10 +192,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
 	 * This is unclear from the ACPI Spec, but it is required
 	 * by some machines.
 	 */
-	status = acpi_get_sleep_type_data(ACPI_STATE_S0,
-					  &acpi_gbl_sleep_type_a,
-					  &acpi_gbl_sleep_type_b);
-	if (ACPI_SUCCESS(status)) {
+	if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) {
 		sleep_type_reg_info =
 		    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
 		sleep_enable_reg_info =
@@ -216,9 +213,9 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
 
 			/* Insert the SLP_TYP bits */
 
-			pm1a_control |= (acpi_gbl_sleep_type_a <<
+			pm1a_control |= (acpi_gbl_sleep_type_a_s0 <<
 					 sleep_type_reg_info->bit_position);
-			pm1b_control |= (acpi_gbl_sleep_type_b <<
+			pm1b_control |= (acpi_gbl_sleep_type_b_s0 <<
 					 sleep_type_reg_info->bit_position);
 
 			/* Write the control registers and ignore any errors */

drivers/acpi/acpica/hwxfsleep.c

@@ -217,6 +217,13 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
 		return_ACPI_STATUS(status);
 	}
 
+	status = acpi_get_sleep_type_data(ACPI_STATE_S0,
+					  &acpi_gbl_sleep_type_a_s0,
+					  &acpi_gbl_sleep_type_b_s0);
+	if (ACPI_FAILURE(status)) {
+		acpi_gbl_sleep_type_a_s0 = ACPI_SLEEP_TYPE_INVALID;
+	}
+
 	/* Execute the _PTS method (Prepare To Sleep) */
 
 	arg_list.count = 1;

drivers/acpi/acpica/utosi.c

@@ -73,6 +73,7 @@ static struct acpi_interface_info acpi_default_supported_interfaces[] = {
 	{"Windows 2018", NULL, 0, ACPI_OSI_WIN_10_RS4},	/* Windows 10 version 1803 - Added 11/2018 */
 	{"Windows 2018.2", NULL, 0, ACPI_OSI_WIN_10_RS5},	/* Windows 10 version 1809 - Added 11/2018 */
 	{"Windows 2019", NULL, 0, ACPI_OSI_WIN_10_19H1},	/* Windows 10 version 1903 - Added 08/2019 */
+	{"Windows 2020", NULL, 0, ACPI_OSI_WIN_10_20H1},	/* Windows 10 version 2004 - Added 08/2021 */
 
 	/* Feature Group Strings */
 

include/acpi/acpixf.h

@@ -12,7 +12,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20210730
+#define ACPI_CA_VERSION                 0x20210930
 
 #include <acpi/acconfig.h>
 #include <acpi/actypes.h>

include/acpi/actbl2.h

@@ -35,6 +35,7 @@
 #define ACPI_SIG_MSCT           "MSCT"	/* Maximum System Characteristics Table */
 #define ACPI_SIG_MSDM           "MSDM"	/* Microsoft Data Management Table */
 #define ACPI_SIG_NFIT           "NFIT"	/* NVDIMM Firmware Interface Table */
+#define ACPI_SIG_NHLT           "NHLT"	/* Non HD Audio Link Table */
 #define ACPI_SIG_PCCT           "PCCT"	/* Platform Communications Channel Table */
 #define ACPI_SIG_PDTT           "PDTT"	/* Platform Debug Trigger Table */
 #define ACPI_SIG_PHAT           "PHAT"	/* Platform Health Assessment Table */
@@ -46,7 +47,6 @@
 #define ACPI_SIG_SBST           "SBST"	/* Smart Battery Specification Table */
 #define ACPI_SIG_SDEI           "SDEI"	/* Software Delegated Exception Interface Table */
 #define ACPI_SIG_SDEV           "SDEV"	/* Secure Devices table */
-#define ACPI_SIG_NHLT           "NHLT"	/* Non-HDAudio Link Table */
 #define ACPI_SIG_SVKL           "SVKL"	/* Storage Volume Key Location Table */
 
 /*
@@ -1409,6 +1409,254 @@ struct nfit_device_handle {
 #define ACPI_NFIT_GET_NODE_ID(handle) \
 	(((handle) & ACPI_NFIT_NODE_ID_MASK)        >> ACPI_NFIT_NODE_ID_OFFSET)
 
+/*******************************************************************************
+ *
+ * NHLT - Non HD Audio Link Table
+ *
+ * Conforms to: Intel Smart Sound Technology NHLT Specification
+ * Version 0.8.1, January 2020.
+ *
+ ******************************************************************************/
+
+/* Main table */
+
+struct acpi_table_nhlt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 endpoint_count;
+};
+
+struct acpi_nhlt_endpoint {
+	u32 descriptor_length;
+	u8 link_type;
+	u8 instance_id;
+	u16 vendor_id;
+	u16 device_id;
+	u16 revision_id;
+	u32 subsystem_id;
+	u8 device_type;
+	u8 direction;
+	u8 virtual_bus_id;
+};
+
+/* Types for link_type field above */
+
+#define ACPI_NHLT_RESERVED_HD_AUDIO         0
+#define ACPI_NHLT_RESERVED_DSP              1
+#define ACPI_NHLT_PDM                       2
+#define ACPI_NHLT_SSP                       3
+#define ACPI_NHLT_RESERVED_SLIMBUS          4
+#define ACPI_NHLT_RESERVED_SOUNDWIRE        5
+#define ACPI_NHLT_TYPE_RESERVED             6	/* 6 and above are reserved */
+
+/* All other values above are reserved */
+
+/* Values for device_id field above */
+
+#define ACPI_NHLT_PDM_DMIC                  0xAE20
+#define ACPI_NHLT_BT_SIDEBAND               0xAE30
+#define ACPI_NHLT_I2S_TDM_CODECS            0xAE23
+
+/* Values for device_type field above */
+
+/* SSP Link */
+
+#define ACPI_NHLT_LINK_BT_SIDEBAND          0
+#define ACPI_NHLT_LINK_FM                   1
+#define ACPI_NHLT_LINK_MODEM                2
+/* 3 is reserved */
+#define ACPI_NHLT_LINK_SSP_ANALOG_CODEC     4
+
+/* PDM Link */
+
+#define ACPI_NHLT_PDM_ON_CAVS_1P8           0
+#define ACPI_NHLT_PDM_ON_CAVS_1P5           1
+
+/* Values for Direction field above */
+
+#define ACPI_NHLT_DIR_RENDER                0
+#define ACPI_NHLT_DIR_CAPTURE               1
+#define ACPI_NHLT_DIR_RENDER_LOOPBACK       2
+#define ACPI_NHLT_DIR_RENDER_FEEDBACK       3
+#define ACPI_NHLT_DIR_RESERVED              4	/* 4 and above are reserved */
+
+struct acpi_nhlt_device_specific_config {
+	u32 capabilities_size;
+	u8 virtual_slot;
+	u8 config_type;
+};
+
+struct acpi_nhlt_device_specific_config_a {
+	u32 capabilities_size;
+	u8 virtual_slot;
+	u8 config_type;
+	u8 array_type;
+};
+
+/* Values for Config Type above */
+
+#define ACPI_NHLT_TYPE_MIC_ARRAY            0x01
+#define ACPI_NHLT_TYPE_GENERIC              0x00
+
+/* Mask for Extension field of array_type */
+
+#define ACPI_NHLT_ARRAY_TYPE_MASK           0x10
+
+struct acpi_nhlt_device_specific_config_b {
+	u32 capabilities_size;
+};
+
+struct acpi_nhlt_device_specific_config_c {
+	u32 capabilities_size;
+	u8 virtual_slot;
+};
+
+struct acpi_nhlt_wave_extensible {
+	u16 format_tag;
+	u16 channel_count;
+	u32 samples_per_sec;
+	u32 avg_bytes_per_sec;
+	u16 block_align;
+	u16 bits_per_sample;
+	u16 extra_format_size;
+	u16 valid_bits_per_sample;
+	u32 channel_mask;
+	u8 sub_format_guid[16];
+};
+
+/* Values for channel_mask above */
+
+#define ACPI_NHLT_SPKR_FRONT_LEFT             0x1
+#define ACPI_NHLT_SPKR_FRONT_RIGHT            0x2
+#define ACPI_NHLT_SPKR_FRONT_CENTER           0x4
+#define ACPI_NHLT_SPKR_LOW_FREQ               0x8
+#define ACPI_NHLT_SPKR_BACK_LEFT              0x10
+#define ACPI_NHLT_SPKR_BACK_RIGHT             0x20
+#define ACPI_NHLT_SPKR_FRONT_LEFT_OF_CENTER   0x40
+#define ACPI_NHLT_SPKR_FRONT_RIGHT_OF_CENTER  0x80
+#define ACPI_NHLT_SPKR_BACK_CENTER            0x100
+#define ACPI_NHLT_SPKR_SIDE_LEFT              0x200
+#define ACPI_NHLT_SPKR_SIDE_RIGHT             0x400
+#define ACPI_NHLT_SPKR_TOP_CENTER             0x800
+#define ACPI_NHLT_SPKR_TOP_FRONT_LEFT         0x1000
+#define ACPI_NHLT_SPKR_TOP_FRONT_CENTER       0x2000
+#define ACPI_NHLT_SPKR_TOP_FRONT_RIGHT        0x4000
+#define ACPI_NHLT_SPKR_TOP_BACK_LEFT          0x8000
+#define ACPI_NHLT_SPKR_TOP_BACK_CENTER        0x10000
+#define ACPI_NHLT_SPKR_TOP_BACK_RIGHT         0x20000
+
+struct acpi_nhlt_format_config {
+	struct acpi_nhlt_wave_extensible format;
+	u32 capability_size;
+	u8 capabilities[];
+};
+
+struct acpi_nhlt_formats_config {
+	u8 formats_count;
+};
+
+struct acpi_nhlt_device_specific_hdr {
+	u8 virtual_slot;
+	u8 config_type;
+};
+
+/* Types for config_type above */
+
+#define ACPI_NHLT_GENERIC                   0
+#define ACPI_NHLT_MIC                       1
+#define ACPI_NHLT_RENDER                    3
+
+struct acpi_nhlt_mic_device_specific_config {
+	struct acpi_nhlt_device_specific_hdr device_config;
+	u8 array_type_ext;
+};
+
+/* Values for array_type_ext above */
+
+#define SMALL_LINEAR_2ELEMENT               0x0A
+#define BIG_LINEAR_2ELEMENT                 0x0B
+#define FIRST_GEOMETRY_LINEAR_4ELEMENT      0x0C
+#define PLANAR_LSHAPED_4ELEMENT             0x0D
+#define SECOND_GEOMETRY_LINEAR_4ELEMENT     0x0E
+#define VENDOR_DEFINED                      0x0F
+#define ARRAY_TYPE_MASK                     0x0F
+#define ARRAY_TYPE_EXT_MASK                 0x10
+
+#define NO_EXTENSION                        0x0
+#define MIC_SNR_SENSITIVITY_EXT             0x1
+
+struct acpi_nhlt_vendor_mic_config {
+	u8 type;
+	u8 panel;
+	u16 speaker_position_distance;	// mm
+	u16 horizontal_offset;	// mm
+	u16 vertical_offset;	// mm
+	u8 frequency_low_band;	// 5*hz
+	u8 frequency_high_band;	// 500*hz
+	u16 direction_angle;	// -180 - + 180
+	u16 elevation_angle;	// -180 - + 180
+	u16 work_vertical_angle_begin;	// -180 - + 180 with 2 deg step
+	u16 work_vertical_angle_end;	// -180 - + 180 with 2 deg step
+	u16 work_horizontal_angle_begin;	// -180 - + 180 with 2 deg step
+	u16 work_horizontal_angle_end;	// -180 - + 180 with 2 deg step
+};
+
+/* Values for Type field above */
+
+#define MIC_OMNIDIRECTIONAL                 0
+#define MIC_SUBCARDIOID                     1
+#define MIC_CARDIOID                        2
+#define MIC_SUPER_CARDIOID                  3
+#define MIC_HYPER_CARDIOID                  4
+#define MIC_8_SHAPED                        5
+#define MIC_VENDOR_DEFINED                  7
+
+/* Values for Panel field above */
+
+#define MIC_TOP                             0
+#define MIC_BOTTOM                          1
+#define MIC_LEFT                            2
+#define MIC_RIGHT                           3
+#define MIC_FRONT                           4
+#define MIC_REAR                            5
+
+struct acpi_nhlt_vendor_mic_device_specific_config {
+	struct acpi_nhlt_mic_device_specific_config mic_array_device_config;
+	u8 number_of_microphones;
+	struct acpi_nhlt_vendor_mic_config mic_config[];	// indexed by number_of_microphones
+};
+
+/* Microphone SNR and Sensitivity extension */
+
+struct acpi_nhlt_mic_snr_sensitivity_extension {
+	u32 SNR;
+	u32 sensitivity;
+};
+
+struct acpi_nhlt_render_feedback_device_specific_config {
+	struct acpi_nhlt_device_specific_config device_config;
+	u8 feedback_virtual_slot;	// render slot in case of capture
+	u16 feedback_channels;	// informative only
+	u16 feedback_valid_bits_per_sample;
+};
+
+/* Linux-specific structures */
+
+struct acpi_nhlt_linux_specific_count {
+	u8 structure_count;
+};
+
+struct acpi_nhlt_linux_specific_data {
+	u8 device_id[16];
+	u8 device_instance_id;
+	u8 device_port_id;
+	u8 filler[18];
+};
+
+struct acpi_nhlt_table_terminator {
+	u32 terminator_value;
+	u32 terminator_signature;
+};
+
 /*******************************************************************************
  *
  * PCCT - Platform Communications Channel Table (ACPI 5.0)

include/acpi/actbl3.h

@@ -191,7 +191,8 @@ enum acpi_srat_type {
 	ACPI_SRAT_TYPE_GICC_AFFINITY = 3,
 	ACPI_SRAT_TYPE_GIC_ITS_AFFINITY = 4,	/* ACPI 6.2 */
 	ACPI_SRAT_TYPE_GENERIC_AFFINITY = 5,	/* ACPI 6.3 */
-	ACPI_SRAT_TYPE_RESERVED = 6	/* 5 and greater are reserved */
+	ACPI_SRAT_TYPE_GENERIC_PORT_AFFINITY = 6,	/* ACPI 6.4 */
+	ACPI_SRAT_TYPE_RESERVED = 7	/* 7 and greater are reserved */
 };
 
 /*
@@ -272,7 +273,11 @@ struct acpi_srat_gic_its_affinity {
 	u32 its_id;
 };
 
-/* 5: Generic Initiator Affinity Structure (ACPI 6.3) */
+/*
+ * Common structure for SRAT subtable types:
+ * 5: ACPI_SRAT_TYPE_GENERIC_AFFINITY
+ * 6: ACPI_SRAT_TYPE_GENERIC_PORT_AFFINITY
+ */
 
 struct acpi_srat_generic_affinity {
 	struct acpi_subtable_header header;

include/acpi/actypes.h

@@ -1281,6 +1281,7 @@ typedef enum {
 #define ACPI_OSI_WIN_10_RS4             0x12
 #define ACPI_OSI_WIN_10_RS5             0x13
 #define ACPI_OSI_WIN_10_19H1            0x14
+#define ACPI_OSI_WIN_10_20H1            0x15
 
 /* Definitions of getopt */