ASoC: SOF: Intel: CNL/ICL/APL: set core_get/core_put ops

Set core_get/put ops for CNL/ICL platforms. These platforms
do not support enabling/disabling secondary cores
dynamically. So skip sending the IPC to power off the
cores in the core_put op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211119192621.4096077-6-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sof/intel/apl.c

@@ -104,6 +104,7 @@ const struct snd_sof_dsp_ops sof_apl_ops = {
 	/* dsp core power up/down */
 	.core_power_up = hda_dsp_enable_core,
 	.core_power_down = hda_dsp_core_reset_power_down,
+	.core_get = hda_dsp_core_get,
 
 	/* trace callback */
 	.trace_init = hda_dsp_trace_init,

sound/soc/sof/intel/cnl.c

@@ -306,6 +306,7 @@ const struct snd_sof_dsp_ops sof_cnl_ops = {
 	/* dsp core power up/down */
 	.core_power_up = hda_dsp_enable_core,
 	.core_power_down = hda_dsp_core_reset_power_down,
+	.core_get = hda_dsp_core_get,
 
 	/* firmware run */
 	.run = hda_dsp_cl_boot_firmware,

sound/soc/sof/intel/hda-dsp.c

@@ -962,3 +962,47 @@ void hda_dsp_d0i3_work(struct work_struct *work)
 				    "error: failed to set DSP state %d substate %d\n",
 				    target_state.state, target_state.substate);
 }
+
+int hda_dsp_core_get(struct snd_sof_dev *sdev, int core)
+{
+	struct sof_ipc_pm_core_config pm_core_config = {
+		.hdr = {
+			.cmd = SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CORE_ENABLE,
+			.size = sizeof(pm_core_config),
+		},
+		.enable_mask = sdev->enabled_cores_mask | BIT(core),
+	};
+	int ret, ret1;
+
+	/* power up core */
+	ret = hda_dsp_enable_core(sdev, BIT(core));
+	if (ret < 0) {
+		dev_err(sdev->dev, "failed to power up core %d with err: %d\n",
+			core, ret);
+		return ret;
+	}
+
+	/* No need to send IPC for primary core or if FW boot is not complete */
+	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE || core == SOF_DSP_PRIMARY_CORE)
+		return 0;
+
+	/* Now notify DSP for secondary cores */
+	ret = sof_ipc_tx_message(sdev->ipc, pm_core_config.hdr.cmd,
+				 &pm_core_config, sizeof(pm_core_config),
+				 &pm_core_config, sizeof(pm_core_config));
+	if (ret < 0) {
+		dev_err(sdev->dev, "failed to enable secondary core '%d' failed with %d\n",
+			core, ret);
+		goto power_down;
+	}
+
+	return ret;
+
+power_down:
+	/* power down core if it is host managed and return the original error if this fails too */
+	ret1 = hda_dsp_core_reset_power_down(sdev, BIT(core));
+	if (ret1 < 0)
+		dev_err(sdev->dev, "failed to power down core: %d with err: %d\n", core, ret1);
+
+	return ret;
+}

sound/soc/sof/intel/hda.h

@@ -496,6 +496,7 @@ int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask);
 int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask);
 int hda_dsp_core_reset_power_down(struct snd_sof_dev *sdev,
 				  unsigned int core_mask);
+int hda_dsp_core_get(struct snd_sof_dev *sdev, int core);
 void hda_dsp_ipc_int_enable(struct snd_sof_dev *sdev);
 void hda_dsp_ipc_int_disable(struct snd_sof_dev *sdev);
 

sound/soc/sof/intel/icl.c

@@ -100,6 +100,7 @@ const struct snd_sof_dsp_ops sof_icl_ops = {
 	/* dsp core power up/down */
 	.core_power_up = hda_dsp_enable_core,
 	.core_power_down = hda_dsp_core_reset_power_down,
+	.core_get = hda_dsp_core_get,
 
 	/* firmware run */
 	.run = hda_dsp_cl_boot_firmware_iccmax,