Commit 9cfd2753 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

media: cec/v4l2: move V4L2 specific CEC functions to V4L2

Several CEC functions are actually specific for use with receivers,
i.e. they should be part of the V4L2 subsystem, not CEC.

These functions deal with validating and modifying EDIDs for (HDMI)
receivers, and they do not actually have anything to do with the CEC
subsystem and whether or not CEC is enabled. The problem was that if
the CEC_CORE config option was not set, then these functions would
become stubs, but that's not right: they should always be valid.

So replace the cec_ prefix by v4l2_ and move them to v4l2-dv-timings.c.
Update all drivers that call these accordingly.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Reported-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>      # for v4.17 and up
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent e81bff39
......@@ -22,74 +22,3 @@ u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
return (edid[loc] << 8) | edid[loc + 1];
}
EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
void cec_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr)
{
unsigned int loc = cec_get_edid_spa_location(edid, size);
u8 sum = 0;
unsigned int i;
if (loc == 0)
return;
edid[loc] = phys_addr >> 8;
edid[loc + 1] = phys_addr & 0xff;
loc &= ~0x7f;
/* update the checksum */
for (i = loc; i < loc + 127; i++)
sum += edid[i];
edid[i] = 256 - sum;
}
EXPORT_SYMBOL_GPL(cec_set_edid_phys_addr);
u16 cec_phys_addr_for_input(u16 phys_addr, u8 input)
{
/* Check if input is sane */
if (WARN_ON(input == 0 || input > 0xf))
return CEC_PHYS_ADDR_INVALID;
if (phys_addr == 0)
return input << 12;
if ((phys_addr & 0x0fff) == 0)
return phys_addr | (input << 8);
if ((phys_addr & 0x00ff) == 0)
return phys_addr | (input << 4);
if ((phys_addr & 0x000f) == 0)
return phys_addr | input;
/*
* All nibbles are used so no valid physical addresses can be assigned
* to the input.
*/
return CEC_PHYS_ADDR_INVALID;
}
EXPORT_SYMBOL_GPL(cec_phys_addr_for_input);
int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
{
int i;
if (parent)
*parent = phys_addr;
if (port)
*port = 0;
if (phys_addr == CEC_PHYS_ADDR_INVALID)
return 0;
for (i = 0; i < 16; i += 4)
if (phys_addr & (0xf << i))
break;
if (i == 16)
return 0;
if (parent)
*parent = phys_addr & (0xfff0 << i);
if (port)
*port = (phys_addr >> i) & 0xf;
for (i += 4; i < 16; i += 4)
if ((phys_addr & (0xf << i)) == 0)
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(cec_phys_addr_validate);
......@@ -2295,8 +2295,8 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
edid->blocks = 2;
return -E2BIG;
}
pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
err = cec_phys_addr_validate(pa, &pa, NULL);
pa = v4l2_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
err = v4l2_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
......
......@@ -789,8 +789,8 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
if (!state->hdmi_edid.present)
return 0;
pa = cec_get_edid_phys_addr(edid, 256, &spa_loc);
err = cec_phys_addr_validate(pa, &pa, NULL);
pa = v4l2_get_edid_phys_addr(edid, 256, &spa_loc);
err = v4l2_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
......
......@@ -1789,7 +1789,7 @@ static int tc358743_s_edid(struct v4l2_subdev *sd,
return -E2BIG;
}
pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
err = cec_phys_addr_validate(pa, &pa, NULL);
err = v4l2_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
......
......@@ -1722,7 +1722,7 @@ int vidioc_s_edid(struct file *file, void *_fh,
return -E2BIG;
}
phys_addr = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
ret = cec_phys_addr_validate(phys_addr, &phys_addr, NULL);
ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
if (ret)
return ret;
......@@ -1738,7 +1738,7 @@ int vidioc_s_edid(struct file *file, void *_fh,
for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
cec_s_phys_addr(dev->cec_tx_adap[i],
cec_phys_addr_for_input(phys_addr, i + 1),
v4l2_phys_addr_for_input(phys_addr, i + 1),
false);
return 0;
}
......
......@@ -863,7 +863,7 @@ int vidioc_g_edid(struct file *file, void *_fh,
if (edid->blocks > dev->edid_blocks - edid->start_block)
edid->blocks = dev->edid_blocks - edid->start_block;
if (adap)
cec_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
v4l2_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
memcpy(edid->edid, dev->edid + edid->start_block * 128, edid->blocks * 128);
return 0;
}
......@@ -15,6 +15,7 @@
#include <media/v4l2-dv-timings.h>
#include <linux/math64.h>
#include <linux/hdmi.h>
#include <media/cec.h>
MODULE_AUTHOR("Hans Verkuil");
MODULE_DESCRIPTION("V4L2 DV Timings Helper Functions");
......@@ -981,3 +982,153 @@ v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
return c;
}
EXPORT_SYMBOL_GPL(v4l2_hdmi_rx_colorimetry);
/**
* v4l2_get_edid_phys_addr() - find and return the physical address
*
* @edid: pointer to the EDID data
* @size: size in bytes of the EDID data
* @offset: If not %NULL then the location of the physical address
* bytes in the EDID will be returned here. This is set to 0
* if there is no physical address found.
*
* Return: the physical address or CEC_PHYS_ADDR_INVALID if there is none.
*/
u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset)
{
unsigned int loc = cec_get_edid_spa_location(edid, size);
if (offset)
*offset = loc;
if (loc == 0)
return CEC_PHYS_ADDR_INVALID;
return (edid[loc] << 8) | edid[loc + 1];
}
EXPORT_SYMBOL_GPL(v4l2_get_edid_phys_addr);
/**
* v4l2_set_edid_phys_addr() - find and set the physical address
*
* @edid: pointer to the EDID data
* @size: size in bytes of the EDID data
* @phys_addr: the new physical address
*
* This function finds the location of the physical address in the EDID
* and fills in the given physical address and updates the checksum
* at the end of the EDID block. It does nothing if the EDID doesn't
* contain a physical address.
*/
void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr)
{
unsigned int loc = cec_get_edid_spa_location(edid, size);
u8 sum = 0;
unsigned int i;
if (loc == 0)
return;
edid[loc] = phys_addr >> 8;
edid[loc + 1] = phys_addr & 0xff;
loc &= ~0x7f;
/* update the checksum */
for (i = loc; i < loc + 127; i++)
sum += edid[i];
edid[i] = 256 - sum;
}
EXPORT_SYMBOL_GPL(v4l2_set_edid_phys_addr);
/**
* v4l2_phys_addr_for_input() - calculate the PA for an input
*
* @phys_addr: the physical address of the parent
* @input: the number of the input port, must be between 1 and 15
*
* This function calculates a new physical address based on the input
* port number. For example:
*
* PA = 0.0.0.0 and input = 2 becomes 2.0.0.0
*
* PA = 3.0.0.0 and input = 1 becomes 3.1.0.0
*
* PA = 3.2.1.0 and input = 5 becomes 3.2.1.5
*
* PA = 3.2.1.3 and input = 5 becomes f.f.f.f since it maxed out the depth.
*
* Return: the new physical address or CEC_PHYS_ADDR_INVALID.
*/
u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input)
{
/* Check if input is sane */
if (WARN_ON(input == 0 || input > 0xf))
return CEC_PHYS_ADDR_INVALID;
if (phys_addr == 0)
return input << 12;
if ((phys_addr & 0x0fff) == 0)
return phys_addr | (input << 8);
if ((phys_addr & 0x00ff) == 0)
return phys_addr | (input << 4);
if ((phys_addr & 0x000f) == 0)
return phys_addr | input;
/*
* All nibbles are used so no valid physical addresses can be assigned
* to the input.
*/
return CEC_PHYS_ADDR_INVALID;
}
EXPORT_SYMBOL_GPL(v4l2_phys_addr_for_input);
/**
* v4l2_phys_addr_validate() - validate a physical address from an EDID
*
* @phys_addr: the physical address to validate
* @parent: if not %NULL, then this is filled with the parents PA.
* @port: if not %NULL, then this is filled with the input port.
*
* This validates a physical address as read from an EDID. If the
* PA is invalid (such as 1.0.1.0 since '0' is only allowed at the end),
* then it will return -EINVAL.
*
* The parent PA is passed into %parent and the input port is passed into
* %port. For example:
*
* PA = 0.0.0.0: has parent 0.0.0.0 and input port 0.
*
* PA = 1.0.0.0: has parent 0.0.0.0 and input port 1.
*
* PA = 3.2.0.0: has parent 3.0.0.0 and input port 2.
*
* PA = f.f.f.f: has parent f.f.f.f and input port 0.
*
* Return: 0 if the PA is valid, -EINVAL if not.
*/
int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
{
int i;
if (parent)
*parent = phys_addr;
if (port)
*port = 0;
if (phys_addr == CEC_PHYS_ADDR_INVALID)
return 0;
for (i = 0; i < 16; i += 4)
if (phys_addr & (0xf << i))
break;
if (i == 16)
return 0;
if (parent)
*parent = phys_addr & (0xfff0 << i);
if (port)
*port = (phys_addr >> i) & 0xf;
for (i += 4; i < 16; i += 4)
if ((phys_addr & (0xf << i)) == 0)
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(v4l2_phys_addr_validate);
......@@ -332,67 +332,6 @@ void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts);
u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset);
/**
* cec_set_edid_phys_addr() - find and set the physical address
*
* @edid: pointer to the EDID data
* @size: size in bytes of the EDID data
* @phys_addr: the new physical address
*
* This function finds the location of the physical address in the EDID
* and fills in the given physical address and updates the checksum
* at the end of the EDID block. It does nothing if the EDID doesn't
* contain a physical address.
*/
void cec_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
/**
* cec_phys_addr_for_input() - calculate the PA for an input
*
* @phys_addr: the physical address of the parent
* @input: the number of the input port, must be between 1 and 15
*
* This function calculates a new physical address based on the input
* port number. For example:
*
* PA = 0.0.0.0 and input = 2 becomes 2.0.0.0
*
* PA = 3.0.0.0 and input = 1 becomes 3.1.0.0
*
* PA = 3.2.1.0 and input = 5 becomes 3.2.1.5
*
* PA = 3.2.1.3 and input = 5 becomes f.f.f.f since it maxed out the depth.
*
* Return: the new physical address or CEC_PHYS_ADDR_INVALID.
*/
u16 cec_phys_addr_for_input(u16 phys_addr, u8 input);
/**
* cec_phys_addr_validate() - validate a physical address from an EDID
*
* @phys_addr: the physical address to validate
* @parent: if not %NULL, then this is filled with the parents PA.
* @port: if not %NULL, then this is filled with the input port.
*
* This validates a physical address as read from an EDID. If the
* PA is invalid (such as 1.0.1.0 since '0' is only allowed at the end),
* then it will return -EINVAL.
*
* The parent PA is passed into %parent and the input port is passed into
* %port. For example:
*
* PA = 0.0.0.0: has parent 0.0.0.0 and input port 0.
*
* PA = 1.0.0.0: has parent 0.0.0.0 and input port 1.
*
* PA = 3.2.0.0: has parent 3.0.0.0 and input port 2.
*
* PA = f.f.f.f: has parent f.f.f.f and input port 0.
*
* Return: 0 if the PA is valid, -EINVAL if not.
*/
int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
#else
static inline int cec_register_adapter(struct cec_adapter *adap,
......@@ -427,25 +366,6 @@ static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
return CEC_PHYS_ADDR_INVALID;
}
static inline void cec_set_edid_phys_addr(u8 *edid, unsigned int size,
u16 phys_addr)
{
}
static inline u16 cec_phys_addr_for_input(u16 phys_addr, u8 input)
{
return CEC_PHYS_ADDR_INVALID;
}
static inline int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
{
if (parent)
*parent = phys_addr;
if (port)
*port = 0;
return 0;
}
#endif
/**
......
......@@ -245,4 +245,10 @@ v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
const struct hdmi_vendor_infoframe *hdmi,
unsigned int height);
u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset);
void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input);
int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment