Merge tag 'mlx5-fixes-2021-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-07-27

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/dev.c

@@ -500,10 +500,7 @@ static int next_phys_dev(struct device *dev, const void *data)
 	return 1;
 }
 
-/* This function is called with two flows:
- * 1. During initialization of mlx5_core_dev and we don't need to lock it.
- * 2. During LAG configure stage and caller holds &mlx5_intf_mutex.
- */
+/* Must be called with intf_mutex held */
 struct mlx5_core_dev *mlx5_get_next_phys_dev(struct mlx5_core_dev *dev)
 {
 	struct auxiliary_device *adev;

drivers/net/ethernet/mellanox/mlx5/core/en/params.c

@@ -471,6 +471,15 @@ static void mlx5e_build_rx_cq_param(struct mlx5_core_dev *mdev,
 	param->cq_period_mode = params->rx_cq_moderation.cq_period_mode;
 }
 
+static u8 rq_end_pad_mode(struct mlx5_core_dev *mdev, struct mlx5e_params *params)
+{
+	bool ro = pcie_relaxed_ordering_enabled(mdev->pdev) &&
+		MLX5_CAP_GEN(mdev, relaxed_ordering_write);
+
+	return ro && params->lro_en ?
+		MLX5_WQ_END_PAD_MODE_NONE : MLX5_WQ_END_PAD_MODE_ALIGN;
+}
+
 int mlx5e_build_rq_param(struct mlx5_core_dev *mdev,
 			 struct mlx5e_params *params,
 			 struct mlx5e_xsk_param *xsk,
@@ -508,7 +517,7 @@ int mlx5e_build_rq_param(struct mlx5_core_dev *mdev,
 	}
 
 	MLX5_SET(wq, wq, wq_type,          params->rq_wq_type);
-	MLX5_SET(wq, wq, end_padding_mode, MLX5_WQ_END_PAD_MODE_ALIGN);
+	MLX5_SET(wq, wq, end_padding_mode, rq_end_pad_mode(mdev, params));
 	MLX5_SET(wq, wq, log_wq_stride,
 		 mlx5e_get_rqwq_log_stride(params->rq_wq_type, ndsegs));
 	MLX5_SET(wq, wq, pd,               mdev->mlx5e_res.hw_objs.pdn);

drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c

@@ -482,8 +482,11 @@ static void mlx5e_ptp_build_params(struct mlx5e_ptp *c,
 		params->log_sq_size = orig->log_sq_size;
 		mlx5e_ptp_build_sq_param(c->mdev, params, &cparams->txq_sq_param);
 	}
-	if (test_bit(MLX5E_PTP_STATE_RX, c->state))
+	/* RQ */
+	if (test_bit(MLX5E_PTP_STATE_RX, c->state)) {
+		params->vlan_strip_disable = orig->vlan_strip_disable;
 		mlx5e_ptp_build_rq_param(c->mdev, c->netdev, c->priv->q_counter, cparams);
+	}
 }
 
 static int mlx5e_init_ptp_rq(struct mlx5e_ptp *c, struct mlx5e_params *params,
@@ -494,7 +497,7 @@ static int mlx5e_init_ptp_rq(struct mlx5e_ptp *c, struct mlx5e_params *params,
 	int err;
 
 	rq->wq_type      = params->rq_wq_type;
-	rq->pdev         = mdev->device;
+	rq->pdev         = c->pdev;
 	rq->netdev       = priv->netdev;
 	rq->priv         = priv;
 	rq->clock        = &mdev->clock;

drivers/net/ethernet/mellanox/mlx5/core/en/trap.c

@@ -37,7 +37,7 @@ static void mlx5e_init_trap_rq(struct mlx5e_trap *t, struct mlx5e_params *params
 	struct mlx5e_priv *priv = t->priv;
 
 	rq->wq_type      = params->rq_wq_type;
-	rq->pdev         = mdev->device;
+	rq->pdev         = t->pdev;
 	rq->netdev       = priv->netdev;
 	rq->priv         = priv;
 	rq->clock        = &mdev->clock;

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -3384,7 +3384,7 @@ static int mlx5e_modify_channels_scatter_fcs(struct mlx5e_channels *chs, bool en
 
 static int mlx5e_modify_channels_vsd(struct mlx5e_channels *chs, bool vsd)
 {
-	int err = 0;
+	int err;
 	int i;
 
 	for (i = 0; i < chs->num; i++) {
@@ -3392,6 +3392,8 @@ static int mlx5e_modify_channels_vsd(struct mlx5e_channels *chs, bool vsd)
 		if (err)
 			return err;
 	}
+	if (chs->ptp && test_bit(MLX5E_PTP_STATE_RX, chs->ptp->state))
+		return mlx5e_modify_rq_vsd(&chs->ptp->rq, vsd);
 
 	return 0;
 }
@@ -3829,6 +3831,24 @@ int mlx5e_set_features(struct net_device *netdev, netdev_features_t features)
 	return 0;
 }
 
+static netdev_features_t mlx5e_fix_uplink_rep_features(struct net_device *netdev,
+						       netdev_features_t features)
+{
+	features &= ~NETIF_F_HW_TLS_RX;
+	if (netdev->features & NETIF_F_HW_TLS_RX)
+		netdev_warn(netdev, "Disabling hw_tls_rx, not supported in switchdev mode\n");
+
+	features &= ~NETIF_F_HW_TLS_TX;
+	if (netdev->features & NETIF_F_HW_TLS_TX)
+		netdev_warn(netdev, "Disabling hw_tls_tx, not supported in switchdev mode\n");
+
+	features &= ~NETIF_F_NTUPLE;
+	if (netdev->features & NETIF_F_NTUPLE)
+		netdev_warn(netdev, "Disabling ntuple, not supported in switchdev mode\n");
+
+	return features;
+}
+
 static netdev_features_t mlx5e_fix_features(struct net_device *netdev,
 					    netdev_features_t features)
 {
@@ -3860,15 +3880,8 @@ static netdev_features_t mlx5e_fix_features(struct net_device *netdev,
 			netdev_warn(netdev, "Disabling rxhash, not supported when CQE compress is active\n");
 	}
 
-	if (mlx5e_is_uplink_rep(priv)) {
-		features &= ~NETIF_F_HW_TLS_RX;
-		if (netdev->features & NETIF_F_HW_TLS_RX)
-			netdev_warn(netdev, "Disabling hw_tls_rx, not supported in switchdev mode\n");
-
-		features &= ~NETIF_F_HW_TLS_TX;
-		if (netdev->features & NETIF_F_HW_TLS_TX)
-			netdev_warn(netdev, "Disabling hw_tls_tx, not supported in switchdev mode\n");
-	}
+	if (mlx5e_is_uplink_rep(priv))
+		features = mlx5e_fix_uplink_rep_features(netdev, features);
 
 	mutex_unlock(&priv->state_lock);
 
@@ -4859,6 +4872,9 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 	if (MLX5_CAP_ETH(mdev, scatter_fcs))
 		netdev->hw_features |= NETIF_F_RXFCS;
 
+	if (mlx5_qos_is_supported(mdev))
+		netdev->hw_features |= NETIF_F_HW_TC;
+
 	netdev->features          = netdev->hw_features;
 
 	/* Defaults */
@@ -4879,8 +4895,6 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 		netdev->hw_features	 |= NETIF_F_NTUPLE;
 #endif
 	}
-	if (mlx5_qos_is_supported(mdev))
-		netdev->features |= NETIF_F_HW_TC;
 
 	netdev->features         |= NETIF_F_HIGHDMA;
 	netdev->features         |= NETIF_F_HW_VLAN_STAG_FILTER;

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -452,12 +452,32 @@ static void mlx5e_detach_mod_hdr(struct mlx5e_priv *priv,
 static
 struct mlx5_core_dev *mlx5e_hairpin_get_mdev(struct net *net, int ifindex)
 {
+	struct mlx5_core_dev *mdev;
 	struct net_device *netdev;
 	struct mlx5e_priv *priv;
 
-	netdev = __dev_get_by_index(net, ifindex);
+	netdev = dev_get_by_index(net, ifindex);
+	if (!netdev)
+		return ERR_PTR(-ENODEV);
+
 	priv = netdev_priv(netdev);
-	return priv->mdev;
+	mdev = priv->mdev;
+	dev_put(netdev);
+
+	/* Mirred tc action holds a refcount on the ifindex net_device (see
+	 * net/sched/act_mirred.c:tcf_mirred_get_dev). So, it's okay to continue using mdev
+	 * after dev_put(netdev), while we're in the context of adding a tc flow.
+	 *
+	 * The mdev pointer corresponds to the peer/out net_device of a hairpin. It is then
+	 * stored in a hairpin object, which exists until all flows, that refer to it, get
+	 * removed.
+	 *
+	 * On the other hand, after a hairpin object has been created, the peer net_device may
+	 * be removed/unbound while there are still some hairpin flows that are using it. This
+	 * case is handled by mlx5e_tc_hairpin_update_dead_peer, which is hooked to
+	 * NETDEV_UNREGISTER event of the peer net_device.
+	 */
+	return mdev;
 }
 
 static int mlx5e_hairpin_create_transport(struct mlx5e_hairpin *hp)
@@ -666,6 +686,10 @@ mlx5e_hairpin_create(struct mlx5e_priv *priv, struct mlx5_hairpin_params *params
 
 	func_mdev = priv->mdev;
 	peer_mdev = mlx5e_hairpin_get_mdev(dev_net(priv->netdev), peer_ifindex);
+	if (IS_ERR(peer_mdev)) {
+		err = PTR_ERR(peer_mdev);
+		goto create_pair_err;
+	}
 
 	pair = mlx5_core_hairpin_create(func_mdev, peer_mdev, params);
 	if (IS_ERR(pair)) {
@@ -804,6 +828,11 @@ static int mlx5e_hairpin_flow_add(struct mlx5e_priv *priv,
 	int err;
 
 	peer_mdev = mlx5e_hairpin_get_mdev(dev_net(priv->netdev), peer_ifindex);
+	if (IS_ERR(peer_mdev)) {
+		NL_SET_ERR_MSG_MOD(extack, "invalid ifindex of mirred device");
+		return PTR_ERR(peer_mdev);
+	}
+
 	if (!MLX5_CAP_GEN(priv->mdev, hairpin) || !MLX5_CAP_GEN(peer_mdev, hairpin)) {
 		NL_SET_ERR_MSG_MOD(extack, "hairpin is not supported");
 		return -EOPNOTSUPP;

drivers/net/ethernet/mellanox/mlx5/core/eswitch.h

@@ -636,7 +636,7 @@ struct esw_vport_tbl_namespace {
 };
 
 struct mlx5_vport_tbl_attr {
-	u16 chain;
+	u32 chain;
 	u16 prio;
 	u16 vport;
 	const struct esw_vport_tbl_namespace *vport_ns;

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c

@@ -382,10 +382,11 @@ esw_setup_vport_dest(struct mlx5_flow_destination *dest, struct mlx5_flow_act *f
 {
 	dest[dest_idx].type = MLX5_FLOW_DESTINATION_TYPE_VPORT;
 	dest[dest_idx].vport.num = esw_attr->dests[attr_idx].rep->vport;
-	dest[dest_idx].vport.vhca_id =
-		MLX5_CAP_GEN(esw_attr->dests[attr_idx].mdev, vhca_id);
-	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+	if (MLX5_CAP_ESW(esw->dev, merged_eswitch)) {
+		dest[dest_idx].vport.vhca_id =
+			MLX5_CAP_GEN(esw_attr->dests[attr_idx].mdev, vhca_id);
 		dest[dest_idx].vport.flags |= MLX5_FLOW_DEST_VPORT_VHCA_ID;
+	}
 	if (esw_attr->dests[attr_idx].flags & MLX5_ESW_DEST_ENCAP) {
 		if (pkt_reformat) {
 			flow_act->action |= MLX5_FLOW_CONTEXT_ACTION_PACKET_REFORMAT;
@@ -2367,6 +2368,9 @@ static int mlx5_esw_offloads_devcom_event(int event,
 
 	switch (event) {
 	case ESW_OFFLOADS_DEVCOM_PAIR:
+		if (mlx5_get_next_phys_dev(esw->dev) != peer_esw->dev)
+			break;
+
 		if (mlx5_eswitch_vport_match_metadata_enabled(esw) !=
 		    mlx5_eswitch_vport_match_metadata_enabled(peer_esw))
 			break;

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c

@@ -1024,17 +1024,19 @@ static int connect_fwd_rules(struct mlx5_core_dev *dev,
 static int connect_flow_table(struct mlx5_core_dev *dev, struct mlx5_flow_table *ft,
 			      struct fs_prio *prio)
 {
-	struct mlx5_flow_table *next_ft;
+	struct mlx5_flow_table *next_ft, *first_ft;
 	int err = 0;
 
 	/* Connect_prev_fts and update_root_ft_create are mutually exclusive */
 
-	if (list_empty(&prio->node.children)) {
+	first_ft = list_first_entry_or_null(&prio->node.children,
+					    struct mlx5_flow_table, node.list);
+	if (!first_ft || first_ft->level > ft->level) {
 		err = connect_prev_fts(dev, ft, prio);
 		if (err)
 			return err;
 
-		next_ft = find_next_chained_ft(prio);
+		next_ft = first_ft ? first_ft : find_next_chained_ft(prio);
 		err = connect_fwd_rules(dev, ft, next_ft);
 		if (err)
 			return err;
@@ -2120,7 +2122,7 @@ static int disconnect_flow_table(struct mlx5_flow_table *ft)
 				node.list) == ft))
 		return 0;
 
-	next_ft = find_next_chained_ft(prio);
+	next_ft = find_next_ft(ft);
 	err = connect_fwd_rules(dev, next_ft, ft);
 	if (err)
 		return err;

drivers/net/ethernet/mellanox/mlx5/core/health.c

@@ -626,8 +626,16 @@ static void mlx5_fw_fatal_reporter_err_work(struct work_struct *work)
 	}
 	fw_reporter_ctx.err_synd = health->synd;
 	fw_reporter_ctx.miss_counter = health->miss_counter;
-	devlink_health_report(health->fw_fatal_reporter,
-			      "FW fatal error reported", &fw_reporter_ctx);
+	if (devlink_health_report(health->fw_fatal_reporter,
+				  "FW fatal error reported", &fw_reporter_ctx) == -ECANCELED) {
+		/* If recovery wasn't performed, due to grace period,
+		 * unload the driver. This ensures that the driver
+		 * closes all its resources and it is not subjected to
+		 * requests from the kernel.
+		 */
+		mlx5_core_err(dev, "Driver is in error state. Unloading\n");
+		mlx5_unload_one(dev);
+	}
 }
 
 static const struct devlink_health_reporter_ops mlx5_fw_fatal_reporter_ops = {