Commit 9d64b539 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

PCI / ACPI / PM: Resume all bridges on suspend-to-RAM

Commit 26112ddc (PCI / ACPI / PM: Resume bridges w/o drivers on
suspend-to-RAM) attempted to fix a functional regression resulting
from commit c62ec461 (PM / core: Fix direct_complete handling
for devices with no callbacks) by resuming PCI bridges without
drivers (that is, "parallel PCI" ones) during system-wide suspend if
the target system state is not ACPI S0 (working state).

That turns out insufficient, however, as it is reported that, at
least in one case, the platform firmware gets confused if a PCIe
root port is suspended before entering the ACPI S3 sleep state.
That issue was exposed by commit 77b3729ca03 (PCI / PM: Use
SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports) that allowed
PCIe ports to stay in runtime suspend during system-wide suspend
(which is OK for suspend-to-idle, but turns out to be problematic
otherwise).

For this reason, drop the driver check from acpi_pci_need_resume()
and resume all bridges (including PCIe ports with drivers) during
system-wide suspend if the target system state is not ACPI S0.

[If the target system state is ACPI S0, it means suspend-to-idle
 and the platform firmware is not going to be invoked to actually
 suspend the system, so there is no need to resume the bridges in
 that case.]

Fixes: 77b3729ca03 (PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200675Reported-by: default avatarteika kazura <teika@gmx.com>
Tested-by: default avatarteika kazura <teika@gmx.com>
Reviewed-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+: 26112ddc (PCI / ACPI / PM: Resume bridges ...)
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent b018fc98
......@@ -632,13 +632,11 @@ static bool acpi_pci_need_resume(struct pci_dev *dev)
/*
* In some cases (eg. Samsung 305V4A) leaving a bridge in suspend over
* system-wide suspend/resume confuses the platform firmware, so avoid
* doing that, unless the bridge has a driver that should take care of
* the PM handling. According to Section 16.1.6 of ACPI 6.2, endpoint
* doing that. According to Section 16.1.6 of ACPI 6.2, endpoint
* devices are expected to be in D3 before invoking the S3 entry path
* from the firmware, so they should not be affected by this issue.
*/
if (pci_is_bridge(dev) && !dev->driver &&
acpi_target_system_state() != ACPI_STATE_S0)
if (pci_is_bridge(dev) && acpi_target_system_state() != ACPI_STATE_S0)
return true;
if (!adev || !acpi_device_power_manageable(adev))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment