Commit 9dbf5a28 authored by Eric Bénard's avatar Eric Bénard Committed by Sebastian Reichel

bq27x00_battery: fix register offset for bq27425

- SOC is at 0x1C so we must add 0x4 as stated in the comment to read the
  right value.
- DCAP is at 0x3c so we also must use a value with the right offset to get
  the correct design capacity.

Actually testing on a bq27410 which has the same register map as bq27425
(but adds new registers).
Signed-off-by: default avatarEric Bénard <eric@eukrea.com>
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
parent 19fb8b2d
......@@ -76,7 +76,8 @@
/* bq27425 register addresses are same as bq27x00 addresses minus 4 */
#define BQ27425_REG_OFFSET 0x04
#define BQ27425_REG_SOC 0x18 /* Register address plus offset */
#define BQ27425_REG_SOC (0x1C + BQ27425_REG_OFFSET)
#define BQ27425_REG_DCAP (0x3C + BQ27425_REG_OFFSET)
#define BQ27000_RS 20 /* Resistor sense */
#define BQ27x00_POWER_CONSTANT (256 * 29200 / 1000)
......@@ -282,9 +283,12 @@ static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di)
{
int ilmd;
if (bq27xxx_is_chip_version_higher(di))
ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false);
else
if (bq27xxx_is_chip_version_higher(di)) {
if (di->chip == BQ27425)
ilmd = bq27x00_read(di, BQ27425_REG_DCAP, false);
else
ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false);
} else
ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true);
if (ilmd < 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment