drm/amd/display: Move vupdate keepout programming from DCN20 to DCN10

[Why]

The OTG_VUPDATE_KEEPOUT register and fields is
available on DCN10, and named the same in DCN20.

[How]

Move register definition and programming function
to dcn10 optc.

There is no functional change.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c

@@ -131,6 +131,22 @@ void optc1_setup_vertical_interrupt2(
 			OTG_VERTICAL_INTERRUPT2_LINE_START, start_line);
 }
 
+/**
+ * Vupdate keepout can be set to a window to block the update lock for that pipe from changing.
+ * Start offset begins with vstartup and goes for x number of clocks,
+ * end offset starts from end of vupdate to x number of clocks.
+ */
+void optc1_set_vupdate_keepout(struct timing_generator *optc,
+			       struct vupdate_keepout_params *params)
+{
+	struct optc *optc1 = DCN10TG_FROM_TG(optc);
+
+	REG_SET_3(OTG_VUPDATE_KEEPOUT, 0,
+		  MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_START_OFFSET, params->start_offset,
+		  MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_END_OFFSET, params->end_offset,
+		  OTG_MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_EN, params->enable);
+}
+
 /**
  * program_timing_generator   used by mode timing set
  * Program CRTC Timing Registers - OTG_H_*, OTG_V_*, Pixel repetition.

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.h

@@ -194,6 +194,9 @@ struct dcn_optc_registers {
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_UPDATE_PENDING, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_BLANK_DATA_DOUBLE_BUFFER_EN, mask_sh),\
 	SF(OTG0_OTG_DOUBLE_BUFFER_CONTROL, OTG_RANGE_TIMING_DBUF_UPDATE_MODE, mask_sh),\
+	SF(OTG0_OTG_VUPDATE_KEEPOUT, OTG_MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_EN, mask_sh), \
+	SF(OTG0_OTG_VUPDATE_KEEPOUT, MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_START_OFFSET, mask_sh), \
+	SF(OTG0_OTG_VUPDATE_KEEPOUT, MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_END_OFFSET, mask_sh), \
 	SF(OTG0_OTG_H_TOTAL, OTG_H_TOTAL, mask_sh),\
 	SF(OTG0_OTG_H_BLANK_START_END, OTG_H_BLANK_START, mask_sh),\
 	SF(OTG0_OTG_H_BLANK_START_END, OTG_H_BLANK_END, mask_sh),\

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c

@@ -134,22 +134,6 @@ void optc2_set_gsl_window(struct timing_generator *optc,
 		OTG_GSL_WINDOW_END_Y, params->gsl_window_end_y);
 }
 
-/**
- * Vupdate keepout can be set to a window to block the update lock for that pipe from changing.
- * Start offset begins with vstartup and goes for x number of clocks,
- * end offset starts from end of vupdate to x number of clocks.
- */
-void optc2_set_vupdate_keepout(struct timing_generator *optc,
-		   const struct vupdate_keepout_params *params)
-{
-	struct optc *optc1 = DCN10TG_FROM_TG(optc);
-
-	REG_SET_3(OTG_VUPDATE_KEEPOUT, 0,
-		MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_START_OFFSET, params->start_offset,
-		MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_END_OFFSET, params->end_offset,
-		OTG_MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_EN, params->enable);
-}
-
 void optc2_set_gsl_source_select(
 		struct timing_generator *optc,
 		int group_idx,

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.h

@@ -56,9 +56,6 @@
 	SF(OTG0_OTG_GSL_WINDOW_X, OTG_GSL_WINDOW_END_X, mask_sh), \
 	SF(OTG0_OTG_GSL_WINDOW_Y, OTG_GSL_WINDOW_START_Y, mask_sh),\
 	SF(OTG0_OTG_GSL_WINDOW_Y, OTG_GSL_WINDOW_END_Y, mask_sh),\
-	SF(OTG0_OTG_VUPDATE_KEEPOUT, OTG_MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_EN, mask_sh), \
-	SF(OTG0_OTG_VUPDATE_KEEPOUT, MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_START_OFFSET, mask_sh), \
-	SF(OTG0_OTG_VUPDATE_KEEPOUT, MASTER_UPDATE_LOCK_VUPDATE_KEEPOUT_END_OFFSET, mask_sh), \
 	SF(OTG0_OTG_GSL_CONTROL, OTG_GSL_MASTER_MODE, mask_sh), \
 	SF(OTG0_OTG_GSL_CONTROL, OTG_MASTER_UPDATE_LOCK_GSL_EN, mask_sh), \
 	SF(OTG0_OTG_DSC_START_POSITION, OTG_DSC_START_POSITION_X, mask_sh), \