Skip to content

L
linux
Commit 9e130e2b authored by Keguang Zhang's avatar Keguang Zhang Committed by Daniel Lezcano
Browse files
Options

MIPS: Loongson32: Remove deprecated PWM timer clocksource 

The Loongson1 PWM timer will be moved to clocksource framework.
Then, the old driver is no longer needed.
Remove the deprecated code and update the Kconfig.
Signed-off-by: default avatarKeguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230512103724.587760-2-keguang.zhang@gmail.com
parent ea950510
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 273 deletions
arch/mips/include/asm/mach-loongson32/loongson1.h
View file @ 9e130e2b
......@@ -47,7 +47,6 @@
#include <regs-clk.h>
#include <regs-mux.h>
#include <regs-pwm.h>
#include <regs-rtc.h>
#include <regs-wdt.h>
......
arch/mips/include/asm/mach-loongson32/regs-pwm.h deleted 100644 → 0
View file @ ea950510
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
*
* Loongson 1 PWM Register Definitions.
*/
#ifndef __ASM_MACH_LOONGSON32_REGS_PWM_H
#define __ASM_MACH_LOONGSON32_REGS_PWM_H
/* Loongson 1 PWM Timer Register Definitions */
#define PWM_CNT 0x0
#define PWM_HRC 0x4
#define PWM_LRC 0x8
#define PWM_CTRL 0xc
/* PWM Control Register Bits */
#define CNT_RST BIT(7)
#define INT_SR BIT(6)
#define INT_EN BIT(5)
#define PWM_SINGLE BIT(4)
#define PWM_OE BIT(3)
#define CNT_EN BIT(0)
#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */
arch/mips/loongson32/Kconfig
View file @ 9e130e2b
......@@ -35,41 +35,4 @@ config LOONGSON1_LS1C
select COMMON_CLK
endchoice
menuconfig CEVT_CSRC_LS1X
bool "Use PWM Timer for clockevent/clocksource"
select MIPS_EXTERNAL_TIMER
depends on CPU_LOONGSON32
help
This option changes the default clockevent/clocksource to PWM Timer,
and is required by Loongson1 CPUFreq support.
If unsure, say N.
choice
prompt "Select clockevent/clocksource"
depends on CEVT_CSRC_LS1X
default TIMER_USE_PWM0
config TIMER_USE_PWM0
bool "Use PWM Timer 0"
help
Use PWM Timer 0 as the default clockevent/clocksourcer.
config TIMER_USE_PWM1
bool "Use PWM Timer 1"
help
Use PWM Timer 1 as the default clockevent/clocksourcer.
config TIMER_USE_PWM2
bool "Use PWM Timer 2"
help
Use PWM Timer 2 as the default clockevent/clocksourcer.
config TIMER_USE_PWM3
bool "Use PWM Timer 3"
help
Use PWM Timer 3 as the default clockevent/clocksourcer.
endchoice
endif # MACH_LOONGSON32
arch/mips/loongson32/common/time.c
View file @ 9e130e2b
......@@ -5,208 +5,8 @@
#include <linux/clk.h>
#include <linux/of_clk.h>
#include <linux/interrupt.h>
#include <linux/sizes.h>
#include <asm/time.h>
#include <loongson1.h>
#include <platform.h>
#ifdef CONFIG_CEVT_CSRC_LS1X
#if defined(CONFIG_TIMER_USE_PWM1)
#define LS1X_TIMER_BASE LS1X_PWM1_BASE
#define LS1X_TIMER_IRQ LS1X_PWM1_IRQ
#elif defined(CONFIG_TIMER_USE_PWM2)
#define LS1X_TIMER_BASE LS1X_PWM2_BASE
#define LS1X_TIMER_IRQ LS1X_PWM2_IRQ
#elif defined(CONFIG_TIMER_USE_PWM3)
#define LS1X_TIMER_BASE LS1X_PWM3_BASE
#define LS1X_TIMER_IRQ LS1X_PWM3_IRQ
#else
#define LS1X_TIMER_BASE LS1X_PWM0_BASE
#define LS1X_TIMER_IRQ LS1X_PWM0_IRQ
#endif
DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
static void __iomem *timer_reg_base;
static uint32_t ls1x_jiffies_per_tick;
static inline void ls1x_pwmtimer_set_period(uint32_t period)
{
__raw_writel(period, timer_reg_base + PWM_HRC);
__raw_writel(period, timer_reg_base + PWM_LRC);
}
static inline void ls1x_pwmtimer_restart(void)
{
__raw_writel(0x0, timer_reg_base + PWM_CNT);
__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
}
void __init ls1x_pwmtimer_init(void)
{
timer_reg_base = ioremap(LS1X_TIMER_BASE, SZ_16);
if (!timer_reg_base)
panic("Failed to remap timer registers");
ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
ls1x_pwmtimer_restart();
}
static u64 ls1x_clocksource_read(struct clocksource *cs)
{
unsigned long flags;
int count;
u32 jifs;
static int old_count;
static u32 old_jifs;
raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
/*
* Although our caller may have the read side of xtime_lock,
* this is now a seqlock, and we are cheating in this routine
* by having side effects on state that we cannot undo if
* there is a collision on the seqlock and our caller has to
* retry. (Namely, old_jifs and old_count.) So we must treat
* jiffies as volatile despite the lock. We read jiffies
* before latching the timer count to guarantee that although
* the jiffies value might be older than the count (that is,
* the counter may underflow between the last point where
* jiffies was incremented and the point where we latch the
* count), it cannot be newer.
*/
jifs = jiffies;
/* read the count */
count = __raw_readl(timer_reg_base + PWM_CNT);
/*
* It's possible for count to appear to go the wrong way for this
* reason:
*
* The timer counter underflows, but we haven't handled the resulting
* interrupt and incremented jiffies yet.
*
* Previous attempts to handle these cases intelligently were buggy, so
* we just do the simple thing now.
*/
if (count < old_count && jifs == old_jifs)
count = old_count;
old_count = count;
old_jifs = jifs;
raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
return (u64) (jifs * ls1x_jiffies_per_tick) + count;
}
static struct clocksource ls1x_clocksource = {
.name = "ls1x-pwmtimer",
.read = ls1x_clocksource_read,
.mask = CLOCKSOURCE_MASK(24),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
{
struct clock_event_device *cd = devid;
ls1x_pwmtimer_restart();
cd->event_handler(cd);
return IRQ_HANDLED;
}
static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
{
raw_spin_lock(&ls1x_timer_lock);
ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
ls1x_pwmtimer_restart();
__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
raw_spin_unlock(&ls1x_timer_lock);
return 0;
}
static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
{
raw_spin_lock(&ls1x_timer_lock);
__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
raw_spin_unlock(&ls1x_timer_lock);
return 0;
}
static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
{
raw_spin_lock(&ls1x_timer_lock);
__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
timer_reg_base + PWM_CTRL);
raw_spin_unlock(&ls1x_timer_lock);
return 0;
}
static int ls1x_clockevent_set_next(unsigned long evt,
struct clock_event_device *cd)
{
raw_spin_lock(&ls1x_timer_lock);
ls1x_pwmtimer_set_period(evt);
ls1x_pwmtimer_restart();
raw_spin_unlock(&ls1x_timer_lock);
return 0;
}
static struct clock_event_device ls1x_clockevent = {
.name = "ls1x-pwmtimer",
.features = CLOCK_EVT_FEAT_PERIODIC,
.rating = 300,
.irq = LS1X_TIMER_IRQ,
.set_next_event = ls1x_clockevent_set_next,
.set_state_shutdown = ls1x_clockevent_set_state_shutdown,
.set_state_periodic = ls1x_clockevent_set_state_periodic,
.set_state_oneshot = ls1x_clockevent_set_state_shutdown,
.tick_resume = ls1x_clockevent_tick_resume,
};
static void __init ls1x_time_init(void)
{
struct clock_event_device *cd = &ls1x_clockevent;
int ret;
if (!mips_hpt_frequency)
panic("Invalid timer clock rate");
ls1x_pwmtimer_init();
clockevent_set_clock(cd, mips_hpt_frequency);
cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
cd->max_delta_ticks = 0xffffff;
cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
cd->min_delta_ticks = 0x000300;
cd->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(cd);
ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
if (ret)
panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
&ls1x_clockevent))
pr_err("Failed to register ls1x-pwmtimer interrupt\n");
}
#endif /* CONFIG_CEVT_CSRC_LS1X */
void __init plat_time_init(void)
{
struct clk *clk = NULL;
......@@ -214,20 +14,10 @@ void __init plat_time_init(void)
/* initialize LS1X clocks */
of_clk_init(NULL);
#ifdef CONFIG_CEVT_CSRC_LS1X
/* setup LS1X PWM timer */
clk = clk_get(NULL, "ls1x-pwmtimer");
if (IS_ERR(clk))
panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
mips_hpt_frequency = clk_get_rate(clk);
ls1x_time_init();
#else
/* setup mips r4k timer */
clk = clk_get(NULL, "cpu_clk");
if (IS_ERR(clk))
panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
mips_hpt_frequency = clk_get_rate(clk) / 2;
#endif /* CONFIG_CEVT_CSRC_LS1X */
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7