Commit 9e2ecbeb authored by Nithin Sujir's avatar Nithin Sujir Committed by David S. Miller

tg3: Add ethtool_eee struct and tg3_setup_eee()

Add an eee structure and update it with eee settings. This will be used
for set/get_eee operations. Add common function tg3_setup_eee() that
will be used in the subsequent patches.
Reviewed-by: default avatarBen Li <benli@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 16495445
......@@ -4249,6 +4249,16 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
/* Advertise 1000-BaseT EEE ability */
if (advertise & ADVERTISED_1000baseT_Full)
val |= MDIO_AN_EEE_ADV_1000T;
if (!tp->eee.eee_enabled) {
val = 0;
tp->eee.advertised = 0;
} else {
tp->eee.advertised = advertise &
(ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Full);
}
err = tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
if (err)
val = 0;
......@@ -4613,6 +4623,42 @@ static void tg3_clear_mac_status(struct tg3 *tp)
udelay(40);
}
static void tg3_setup_eee(struct tg3 *tp)
{
u32 val;
val = TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
TG3_CPMU_EEE_LNKIDL_UART_IDL;
if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0)
val |= TG3_CPMU_EEE_LNKIDL_APE_TX_MT;
tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, val);
tw32_f(TG3_CPMU_EEE_CTRL,
TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
val = TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
(tp->eee.tx_lpi_enabled ? TG3_CPMU_EEEMD_LPI_IN_TX : 0) |
TG3_CPMU_EEEMD_LPI_IN_RX |
TG3_CPMU_EEEMD_EEE_ENABLE;
if (tg3_asic_rev(tp) != ASIC_REV_5717)
val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN;
if (tg3_flag(tp, ENABLE_APE))
val |= TG3_CPMU_EEEMD_APE_TX_DET_EN;
tw32_f(TG3_CPMU_EEE_MODE, tp->eee.eee_enabled ? val : 0);
tw32_f(TG3_CPMU_EEE_DBTMR1,
TG3_CPMU_DBTMR1_PCIEXIT_2047US |
(tp->eee.tx_lpi_timer & 0xffff));
tw32_f(TG3_CPMU_EEE_DBTMR2,
TG3_CPMU_DBTMR2_APE_TX_2047US |
TG3_CPMU_DBTMR2_TXIDXEQ_2047US);
}
static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset)
{
bool current_link_up;
......@@ -9448,38 +9494,8 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy)
tg3_abort_hw(tp, 1);
/* Enable MAC control of LPI */
if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
val = TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
TG3_CPMU_EEE_LNKIDL_UART_IDL;
if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0)
val |= TG3_CPMU_EEE_LNKIDL_APE_TX_MT;
tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, val);
tw32_f(TG3_CPMU_EEE_CTRL,
TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
val = TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
TG3_CPMU_EEEMD_LPI_IN_TX |
TG3_CPMU_EEEMD_LPI_IN_RX |
TG3_CPMU_EEEMD_EEE_ENABLE;
if (tg3_asic_rev(tp) != ASIC_REV_5717)
val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN;
if (tg3_flag(tp, ENABLE_APE))
val |= TG3_CPMU_EEEMD_APE_TX_DET_EN;
tw32_f(TG3_CPMU_EEE_MODE, val);
tw32_f(TG3_CPMU_EEE_DBTMR1,
TG3_CPMU_DBTMR1_PCIEXIT_2047US |
TG3_CPMU_DBTMR1_LNKIDLE_2047US);
tw32_f(TG3_CPMU_EEE_DBTMR2,
TG3_CPMU_DBTMR2_APE_TX_2047US |
TG3_CPMU_DBTMR2_TXIDXEQ_2047US);
}
if (tp->phy_flags & TG3_PHYFLG_EEE_CAP)
tg3_setup_eee(tp);
if ((tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
!(tp->phy_flags & TG3_PHYFLG_USER_CONFIGURED)) {
......@@ -14946,9 +14962,18 @@ static int tg3_phy_probe(struct tg3 *tp)
(tg3_asic_rev(tp) == ASIC_REV_5717 &&
tg3_chip_rev_id(tp) != CHIPREV_ID_5717_A0) ||
(tg3_asic_rev(tp) == ASIC_REV_57765 &&
tg3_chip_rev_id(tp) != CHIPREV_ID_57765_A0)))
tg3_chip_rev_id(tp) != CHIPREV_ID_57765_A0))) {
tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
tp->eee.supported = SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full;
tp->eee.advertised = ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Full;
tp->eee.eee_enabled = 1;
tp->eee.tx_lpi_enabled = 1;
tp->eee.tx_lpi_timer = TG3_CPMU_DBTMR1_LNKIDLE_2047US;
}
tg3_phy_init_link_config(tp);
if (!(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
......
......@@ -3371,6 +3371,7 @@ struct tg3 {
unsigned int irq_cnt;
struct ethtool_coalesce coal;
struct ethtool_eee eee;
/* firmware info */
const char *fw_needed;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment