Commit 9e37d3e2 authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (lm75) Handle cleanup with devm_add_action

Use devm_add_action() to register the function to restore the original
chip configuration. Use devm_hwmon_device_register_with_groups()
to register the hwmon device, and drop the remove function as no
longer needed.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent eacc48ce
......@@ -76,7 +76,6 @@ static const u8 LM75_REG_TEMP[3] = {
/* Each client has this additional data */
struct lm75_data {
struct i2c_client *client;
struct device *hwmon_dev;
struct mutex update_lock;
u8 orig_conf;
u8 resolution; /* In bits, between 9 and 12 */
......@@ -185,10 +184,19 @@ static const struct thermal_zone_of_device_ops lm75_of_thermal_ops = {
/* device probe and removal */
static void lm75_remove(void *data)
{
struct lm75_data *lm75 = data;
struct i2c_client *client = lm75->client;
i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
}
static int
lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct lm75_data *data;
int status;
u8 set_mask, clr_mask;
......@@ -298,29 +306,22 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
new |= set_mask;
if (status != new)
lm75_write_value(client, LM75_REG_CONF, new);
dev_dbg(dev, "Config %02x\n", new);
data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
data, lm75_groups);
if (IS_ERR(data->hwmon_dev))
return PTR_ERR(data->hwmon_dev);
devm_add_action(dev, lm75_remove, data);
devm_thermal_zone_of_sensor_register(data->hwmon_dev, 0,
data->hwmon_dev,
&lm75_of_thermal_ops);
dev_dbg(dev, "Config %02x\n", new);
dev_info(dev, "%s: sensor '%s'\n",
dev_name(data->hwmon_dev), client->name);
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data, lm75_groups);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
return 0;
}
devm_thermal_zone_of_sensor_register(hwmon_dev, 0,
hwmon_dev,
&lm75_of_thermal_ops);
static int lm75_remove(struct i2c_client *client)
{
struct lm75_data *data = i2c_get_clientdata(client);
dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);
hwmon_device_unregister(data->hwmon_dev);
lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
return 0;
}
......@@ -489,7 +490,6 @@ static struct i2c_driver lm75_driver = {
.pm = LM75_DEV_PM_OPS,
},
.probe = lm75_probe,
.remove = lm75_remove,
.id_table = lm75_ids,
.detect = lm75_detect,
.address_list = normal_i2c,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment