Commit 9e955a42 authored by Dan Murphy's avatar Dan Murphy Committed by Pavel Machek

leds: lm3532: Fix warnings for undefined parameters

Fix warnings for undefined parameters when W=1 is used.
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Reviewed-by: default avatarMarek Behún <kabel@kernel.org>
Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
parent b5a3b44f
......@@ -96,15 +96,15 @@
/*
* struct lm3532_als_data
* @config - value of ALS configuration register
* @als1_imp_sel - value of ALS1 resistor select register
* @als2_imp_sel - value of ALS2 resistor select register
* @als_avrg_time - ALS averaging time
* @als_input_mode - ALS input mode for brightness control
* @als_vmin - Minimum ALS voltage
* @als_vmax - Maximum ALS voltage
* @zone_lo - values of ALS lo ZB(Zone Boundary) registers
* @zone_hi - values of ALS hi ZB(Zone Boundary) registers
* @config: value of ALS configuration register
* @als1_imp_sel: value of ALS1 resistor select register
* @als2_imp_sel: value of ALS2 resistor select register
* @als_avrg_time: ALS averaging time
* @als_input_mode: ALS input mode for brightness control
* @als_vmin: Minimum ALS voltage
* @als_vmax: Maximum ALS voltage
* @zone_lo: values of ALS lo ZB(Zone Boundary) registers
* @zone_hi: values of ALS hi ZB(Zone Boundary) registers
*/
struct lm3532_als_data {
u8 config;
......@@ -121,14 +121,14 @@ struct lm3532_als_data {
/**
* struct lm3532_led
* @led_dev: led class device
* @priv - Pointer the device data structure
* @control_bank - Control bank the LED is associated to
* @mode - Mode of the LED string
* @ctrl_brt_pointer - Zone target register that controls the sink
* @num_leds - Number of LED strings are supported in this array
* @full_scale_current - The full-scale current setting for the current sink.
* @led_strings - The LED strings supported in this array
* @enabled - Enabled status
* @priv: Pointer the device data structure
* @control_bank: Control bank the LED is associated to
* @mode: Mode of the LED string
* @ctrl_brt_pointer: Zone target register that controls the sink
* @num_leds: Number of LED strings are supported in this array
* @full_scale_current: The full-scale current setting for the current sink.
* @led_strings: The LED strings supported in this array
* @enabled: Enabled status
*/
struct lm3532_led {
struct led_classdev led_dev;
......@@ -145,16 +145,16 @@ struct lm3532_led {
/**
* struct lm3532_data
* @enable_gpio - Hardware enable gpio
* @enable_gpio: Hardware enable gpio
* @regulator: regulator
* @client: i2c client
* @regmap - Devices register map
* @dev - Pointer to the devices device struct
* @lock - Lock for reading/writing the device
* @als_data - Pointer to the als data struct
* @runtime_ramp_up - Runtime ramp up setting
* @runtime_ramp_down - Runtime ramp down setting
* @leds - Array of LED strings
* @regmap: Devices register map
* @dev: Pointer to the devices device struct
* @lock: Lock for reading/writing the device
* @als_data: Pointer to the als data struct
* @runtime_ramp_up: Runtime ramp up setting
* @runtime_ramp_down: Runtime ramp down setting
* @leds: Array of LED strings
*/
struct lm3532_data {
struct gpio_desc *enable_gpio;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment