Commit 9eac6d0a authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Nicolas Pitre

ARM: Remove dependency of plat-orion GPIO code on mach directory includes.

This patch makes the various mach dirs that use the plat-orion GPIO
code pass in GPIO-related platform info (GPIO controller base address,
secondary base IRQ number, etc) explicitly, instead of having
plat-orion get those values by including a mach dir include file --
the latter mechanism is problematic if you want to support multiple
ARM platforms in the same kernel image.
Signed-off-by: default avatarLennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: default avatarNicolas Pitre <nico@fluxnic.net>
parent 4ee1f6b5
...@@ -130,7 +130,8 @@ ...@@ -130,7 +130,8 @@
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) #define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) #define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) #define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420)
#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) #define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) #define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
......
...@@ -6,46 +6,4 @@ ...@@ -6,46 +6,4 @@
* warranty of any kind, whether express or implied. * warranty of any kind, whether express or implied.
*/ */
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <asm/errno.h>
#include <mach/irqs.h>
#include <plat/gpio.h> #include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
#define GPIO_MAX 72
#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : \
((pin < 64) ? GPIO_BASE_HI : \
DOVE_GPIO2_VIRT_BASE))
#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
static inline int gpio_to_irq(int pin)
{
if (pin < NR_GPIO_IRQS)
return pin + IRQ_DOVE_GPIO_START;
return -EINVAL;
}
static inline int irq_to_gpio(int irq)
{
if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
return irq - IRQ_DOVE_GPIO_START;
return -EINVAL;
}
#endif
...@@ -99,11 +99,21 @@ void __init dove_init_irq(void) ...@@ -99,11 +99,21 @@ void __init dove_init_irq(void)
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
/* /*
* Mask and clear GPIO IRQ interrupts. * Initialize gpiolib for GPIOs 0-71.
*/ */
writel(0, GPIO_LEVEL_MASK(0)); orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
writel(0, GPIO_EDGE_MASK(0)); IRQ_DOVE_GPIO_START);
writel(0, GPIO_EDGE_CAUSE(0)); set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 32);
set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 64);
/* /*
* Mask and clear PMU interrupts * Mask and clear PMU interrupts
...@@ -111,18 +121,6 @@ void __init dove_init_irq(void) ...@@ -111,18 +121,6 @@ void __init dove_init_irq(void)
writel(0, PMU_INTERRUPT_MASK); writel(0, PMU_INTERRUPT_MASK);
writel(0, PMU_INTERRUPT_CAUSE); writel(0, PMU_INTERRUPT_CAUSE);
for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) { for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
set_irq_chip(i, &pmu_irq_chip); set_irq_chip(i, &pmu_irq_chip);
set_irq_handler(i, handle_level_irq); set_irq_handler(i, handle_level_irq);
......
...@@ -6,33 +6,4 @@ ...@@ -6,33 +6,4 @@
* warranty of any kind, whether express or implied. * warranty of any kind, whether express or implied.
*/ */
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <mach/irqs.h>
#include <plat/gpio.h> #include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
#define GPIO_MAX 50
#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0140 : 0x0100)
#define GPIO_OUT(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x00)
#define GPIO_IO_CONF(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x04)
#define GPIO_BLINK_EN(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x08)
#define GPIO_IN_POL(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x0c)
#define GPIO_DATA_IN(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x10)
#define GPIO_EDGE_CAUSE(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x14)
#define GPIO_EDGE_MASK(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x18)
#define GPIO_LEVEL_MASK(pin) (DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x1c)
static inline int gpio_to_irq(int pin)
{
return pin + IRQ_KIRKWOOD_GPIO_START;
}
static inline int irq_to_gpio(int irq)
{
return irq - IRQ_KIRKWOOD_GPIO_START;
}
#endif
...@@ -69,6 +69,8 @@ ...@@ -69,6 +69,8 @@
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) #define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030)
#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) #define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140)
#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) #define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) #define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) #define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
......
...@@ -27,31 +27,21 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) ...@@ -27,31 +27,21 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
void __init kirkwood_init_irq(void) void __init kirkwood_init_irq(void)
{ {
int i;
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
/* /*
* Mask and clear GPIO IRQ interrupts. * Initialize gpiolib for GPIOs 0-49.
*/ */
writel(0, GPIO_LEVEL_MASK(0)); orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0,
writel(0, GPIO_EDGE_MASK(0)); IRQ_KIRKWOOD_GPIO_START);
writel(0, GPIO_EDGE_CAUSE(0));
writel(0, GPIO_LEVEL_MASK(32));
writel(0, GPIO_EDGE_MASK(32));
writel(0, GPIO_EDGE_CAUSE(32));
for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START + 32);
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler); set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler);
......
...@@ -49,9 +49,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list) ...@@ -49,9 +49,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
if (!variant_mask) if (!variant_mask)
return; return;
/* Initialize gpiolib. */
orion_gpio_init();
printk(KERN_DEBUG "initial MPP regs:"); printk(KERN_DEBUG "initial MPP regs:");
for (i = 0; i < MPP_NR_REGS; i++) { for (i = 0; i < MPP_NR_REGS; i++) {
mpp_ctrl[i] = readl(MPP_CTRL(i)); mpp_ctrl[i] = readl(MPP_CTRL(i));
......
...@@ -6,35 +6,4 @@ ...@@ -6,35 +6,4 @@
* warranty of any kind, whether express or implied. * warranty of any kind, whether express or implied.
*/ */
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <mach/irqs.h>
#include <plat/gpio.h> #include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
extern int mv78xx0_core_index(void);
#define GPIO_MAX 32
#define GPIO_OUT(pin) (DEV_BUS_VIRT_BASE + 0x0100)
#define GPIO_IO_CONF(pin) (DEV_BUS_VIRT_BASE + 0x0104)
#define GPIO_BLINK_EN(pin) (DEV_BUS_VIRT_BASE + 0x0108)
#define GPIO_IN_POL(pin) (DEV_BUS_VIRT_BASE + 0x010c)
#define GPIO_DATA_IN(pin) (DEV_BUS_VIRT_BASE + 0x0110)
#define GPIO_EDGE_CAUSE(pin) (DEV_BUS_VIRT_BASE + 0x0114)
#define GPIO_MASK_OFF (mv78xx0_core_index() ? 0x18 : 0)
#define GPIO_EDGE_MASK(pin) (DEV_BUS_VIRT_BASE + 0x0118 + GPIO_MASK_OFF)
#define GPIO_LEVEL_MASK(pin) (DEV_BUS_VIRT_BASE + 0x011c + GPIO_MASK_OFF)
static inline int gpio_to_irq(int pin)
{
return pin + IRQ_MV78XX0_GPIO_START;
}
static inline int irq_to_gpio(int irq)
{
return irq - IRQ_MV78XX0_GPIO_START;
}
#endif
...@@ -71,6 +71,7 @@ ...@@ -71,6 +71,7 @@
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) #define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) #define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
#define GPIO_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100)
#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) #define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100) #define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) #define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
......
...@@ -26,28 +26,18 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) ...@@ -26,28 +26,18 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
void __init mv78xx0_init_irq(void) void __init mv78xx0_init_irq(void)
{ {
int i;
/* Initialize gpiolib. */
orion_gpio_init();
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF)); orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
/* /*
* Mask and clear GPIO IRQ interrupts. * Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
* core #0.)
*/ */
writel(0, GPIO_LEVEL_MASK(0)); orion_gpio_init(0, 32, GPIO_VIRT_BASE,
writel(0, GPIO_EDGE_MASK(0)); mv78xx0_core_index() ? 0x18 : 0,
writel(0, GPIO_EDGE_CAUSE(0)); IRQ_MV78XX0_GPIO_START);
for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler); set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler);
......
...@@ -44,9 +44,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list) ...@@ -44,9 +44,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
if (!variant_mask) if (!variant_mask)
return; return;
/* Initialize gpiolib. */
orion_gpio_init();
printk(KERN_DEBUG "initial MPP regs:"); printk(KERN_DEBUG "initial MPP regs:");
for (i = 0; i < MPP_NR_REGS; i++) { for (i = 0; i < MPP_NR_REGS; i++) {
mpp_ctrl[i] = readl(MPP_CTRL(i)); mpp_ctrl[i] = readl(MPP_CTRL(i));
......
...@@ -6,32 +6,4 @@ ...@@ -6,32 +6,4 @@
* warranty of any kind, whether express or implied. * warranty of any kind, whether express or implied.
*/ */
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <mach/irqs.h>
#include <plat/gpio.h> #include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
#define GPIO_MAX 32
#define GPIO_OUT(pin) ORION5X_DEV_BUS_REG(0x100)
#define GPIO_IO_CONF(pin) ORION5X_DEV_BUS_REG(0x104)
#define GPIO_BLINK_EN(pin) ORION5X_DEV_BUS_REG(0x108)
#define GPIO_IN_POL(pin) ORION5X_DEV_BUS_REG(0x10c)
#define GPIO_DATA_IN(pin) ORION5X_DEV_BUS_REG(0x110)
#define GPIO_EDGE_CAUSE(pin) ORION5X_DEV_BUS_REG(0x114)
#define GPIO_EDGE_MASK(pin) ORION5X_DEV_BUS_REG(0x118)
#define GPIO_LEVEL_MASK(pin) ORION5X_DEV_BUS_REG(0x11c)
static inline int gpio_to_irq(int pin)
{
return pin + IRQ_ORION5X_GPIO_START;
}
static inline int irq_to_gpio(int irq)
{
return irq - IRQ_ORION5X_GPIO_START;
}
#endif
...@@ -73,6 +73,7 @@ ...@@ -73,6 +73,7 @@
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) #define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
#define GPIO_VIRT_BASE ORION5X_DEV_BUS_REG(0x0100)
#define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600) #define SPI_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) #define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) #define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
......
...@@ -28,27 +28,12 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) ...@@ -28,27 +28,12 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
void __init orion5x_init_irq(void) void __init orion5x_init_irq(void)
{ {
int i;
orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
/* /*
* Mask and clear GPIO IRQ interrupts * Initialize gpiolib for GPIOs 0-31.
*/
writel(0x0, GPIO_LEVEL_MASK(0));
writel(0x0, GPIO_EDGE_MASK(0));
writel(0x0, GPIO_EDGE_CAUSE(0));
/*
* Register chained level handlers for GPIO IRQs by default.
* User can use set_type() if he wants to use edge types handlers.
*/ */
for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START);
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler); set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler); set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler); set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
......
...@@ -124,9 +124,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) ...@@ -124,9 +124,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
/* Initialize gpiolib. */
orion_gpio_init();
for ( ; mode->mpp >= 0; mode++) { for ( ; mode->mpp >= 0; mode++) {
u32 *reg; u32 *reg;
int num_type; int num_type;
......
This diff is collapsed.
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#define __PLAT_GPIO_H #define __PLAT_GPIO_H
#include <linux/init.h> #include <linux/init.h>
#include <asm-generic/gpio.h>
/* /*
* GENERIC_GPIO primitives. * GENERIC_GPIO primitives.
...@@ -19,6 +20,7 @@ ...@@ -19,6 +20,7 @@
#define gpio_get_value __gpio_get_value #define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value #define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep #define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
/* /*
* Orion-specific GPIO API extensions. * Orion-specific GPIO API extensions.
...@@ -31,7 +33,8 @@ void orion_gpio_set_blink(unsigned pin, int blink); ...@@ -31,7 +33,8 @@ void orion_gpio_set_blink(unsigned pin, int blink);
void orion_gpio_set_valid(unsigned pin, int mode); void orion_gpio_set_valid(unsigned pin, int mode);
/* Initialize gpiolib. */ /* Initialize gpiolib. */
void __init orion_gpio_init(void); void __init orion_gpio_init(int gpio_base, int ngpio,
u32 base, int mask_offset, int secondary_irq_base);
/* /*
* GPIO interrupt handling. * GPIO interrupt handling.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment