Commit 9ebe5422 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "An update to the Goodix touchscreen driver to enable it work properly
  on various Bay Trail and Cherry Trail devices, and a few other
  assorted changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: update SPDX tag for input-event-codes.h
  Input: i8042 - add Acer Aspire 5738z to nomux list
  Input: goodix - fix compilation when ACPI support is disabled
  dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
  Input: of_touchscreen - explicitly choose axis
  Input: goodix - support gt9147 touchpanel
  dt-bindings: touchscreen: goodix: support of gt9147
  Input: goodix - add support for Goodix GT917S
  Input: goodix - use string-based chip ID
  dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
  Input: goodix - add support for more then one touch-key
  Input: goodix - fix spurious key release events
  Input: goodix - try to reset the controller if the i2c-test fails
  Input: goodix - restore config on resume if necessary
  Input: goodix - make goodix_send_cfg() take a raw buffer as argument
  Input: goodix - add minimum firmware size check
  Input: goodix - save a copy of the config from goodix_read_config()
  Input: goodix - move defines to above struct goodix_ts_data declaration
  Input: goodix - add support for controlling the IRQ pin through ACPI methods
  Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
  ...
parents 34183ddd cd510679
FocalTech EDT-FT5x06 Polytouch driver
=====================================
There are 5 variants of the chip for various touch panel sizes
FT5206GE1 2.8" .. 3.8"
FT5306DE4 4.3" .. 7"
FT5406EE8 7" .. 8.9"
FT5506EEG 7" .. 8.9"
FT5726NEI 5.7” .. 11.6"
The software interface is identical for all those chips, so that
currently there is no need for the driver to distinguish between the
different chips. Nevertheless distinct compatible strings are used so
that a distinction can be added if necessary without changing the DT
bindings.
Required properties:
- compatible: "edt,edt-ft5206"
or: "edt,edt-ft5306"
or: "edt,edt-ft5406"
or: "edt,edt-ft5506"
or: "evervision,ev-ft5726"
or: "focaltech,ft6236"
- reg: I2C slave address of the chip (0x38)
- interrupts: interrupt specification for the touchdetect
interrupt
Optional properties:
- reset-gpios: GPIO specification for the RESET input
- wake-gpios: GPIO specification for the WAKE input
- vcc-supply: Regulator that supplies the touchscreen
- pinctrl-names: should be "default"
- pinctrl-0: a phandle pointing to the pin settings for the
control gpios
- wakeup-source: If present the device will act as wakeup-source
- threshold: allows setting the "click"-threshold in the range
from 0 to 80.
- gain: allows setting the sensitivity in the range from 0 to
31. Note that lower values indicate higher
sensitivity.
- offset: allows setting the edge compensation in the range from
0 to 31.
- offset-x: Same as offset, but applies only to the horizontal position.
Range from 0 to 80, only supported by evervision,ev-ft5726
devices.
- offset-y: Same as offset, but applies only to the vertical position.
Range from 0 to 80, only supported by evervision,ev-ft5726
devices.
- touchscreen-size-x : See touchscreen.txt
- touchscreen-size-y : See touchscreen.txt
- touchscreen-fuzz-x : See touchscreen.txt
- touchscreen-fuzz-y : See touchscreen.txt
- touchscreen-inverted-x : See touchscreen.txt
- touchscreen-inverted-y : See touchscreen.txt
- touchscreen-swapped-x-y : See touchscreen.txt
Example:
polytouch: edt-ft5x06@38 {
compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&edt_ft5x06_pins>;
interrupt-parent = <&gpio2>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
};
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: FocalTech EDT-FT5x06 Polytouch Bindings
description: |
There are 5 variants of the chip for various touch panel sizes
FT5206GE1 2.8" .. 3.8"
FT5306DE4 4.3" .. 7"
FT5406EE8 7" .. 8.9"
FT5506EEG 7" .. 8.9"
FT5726NEI 5.7” .. 11.6"
maintainers:
- Dmitry Torokhov <dmitry.torokhov@gmail.com>
allOf:
- $ref: touchscreen.yaml#
- if:
properties:
compatible:
contains:
enum:
- evervision,ev-ft5726
then:
properties:
offset-x: true
offset-y: true
properties:
compatible:
enum:
- edt,edt-ft5206
- edt,edt-ft5306
- edt,edt-ft5406
- edt,edt-ft5506
- evervision,ev-ft5726
- focaltech,ft6236
reg:
const: 0x38
interrupts:
maxItems: 1
reset-gpios:
maxItems: 1
wake-gpios:
maxItems: 1
wakeup-source: true
vcc-supply:
maxItems: 1
gain:
description: Allows setting the sensitivity in the range from 0 to 31.
Note that lower values indicate higher sensitivity.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 31
offset:
description: Allows setting the edge compensation in the range from 0 to 31.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 31
offset-x:
description: Same as offset, but applies only to the horizontal position.
Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 80
offset-y:
description: Same as offset, but applies only to the vertical position.
Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 80
touchscreen-size-x: true
touchscreen-size-y: true
touchscreen-fuzz-x: true
touchscreen-fuzz-y: true
touchscreen-inverted-x: true
touchscreen-inverted-y: true
touchscreen-swapped-x-y: true
interrupt-controller: true
additionalProperties: false
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c@00000000 {
#address-cells = <1>;
#size-cells = <0>;
edt-ft5x06@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&gpio2>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
};
};
...
...@@ -21,6 +21,8 @@ properties: ...@@ -21,6 +21,8 @@ properties:
- goodix,gt911 - goodix,gt911
- goodix,gt9110 - goodix,gt9110
- goodix,gt912 - goodix,gt912
- goodix,gt9147
- goodix,gt917s
- goodix,gt927 - goodix,gt927
- goodix,gt9271 - goodix,gt9271
- goodix,gt928 - goodix,gt928
......
...@@ -530,6 +530,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { ...@@ -530,6 +530,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"), DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"),
}, },
}, },
{
/*
* Acer Aspire 5738z
* Touchpad stops working in mux mode when dis- + re-enabled
* with the touchpad enable/disable toggle hotkey
*/
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
},
},
{ } { }
}; };
......
...@@ -1309,6 +1309,7 @@ static int elants_i2c_probe(struct i2c_client *client, ...@@ -1309,6 +1309,7 @@ static int elants_i2c_probe(struct i2c_client *client,
input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
error = input_register_device(ts->input); error = input_register_device(ts->input);
if (error) { if (error) {
......
This diff is collapsed.
...@@ -66,7 +66,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, ...@@ -66,7 +66,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
{ {
struct device *dev = input->dev.parent; struct device *dev = input->dev.parent;
struct input_absinfo *absinfo; struct input_absinfo *absinfo;
unsigned int axis; unsigned int axis, axis_x, axis_y;
unsigned int minimum, maximum, fuzz; unsigned int minimum, maximum, fuzz;
bool data_present; bool data_present;
...@@ -74,33 +74,34 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, ...@@ -74,33 +74,34 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
if (!input->absinfo) if (!input->absinfo)
return; return;
axis = multitouch ? ABS_MT_POSITION_X : ABS_X; axis_x = multitouch ? ABS_MT_POSITION_X : ABS_X;
axis_y = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
input_abs_get_min(input, axis), input_abs_get_min(input, axis_x),
&minimum) | &minimum) |
touchscreen_get_prop_u32(dev, "touchscreen-size-x", touchscreen_get_prop_u32(dev, "touchscreen-size-x",
input_abs_get_max(input, input_abs_get_max(input,
axis) + 1, axis_x) + 1,
&maximum) | &maximum) |
touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x", touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
input_abs_get_fuzz(input, axis), input_abs_get_fuzz(input, axis_x),
&fuzz); &fuzz);
if (data_present) if (data_present)
touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz); touchscreen_set_params(input, axis_x, minimum, maximum - 1, fuzz);
axis = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y", data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y",
input_abs_get_min(input, axis), input_abs_get_min(input, axis_y),
&minimum) | &minimum) |
touchscreen_get_prop_u32(dev, "touchscreen-size-y", touchscreen_get_prop_u32(dev, "touchscreen-size-y",
input_abs_get_max(input, input_abs_get_max(input,
axis) + 1, axis_y) + 1,
&maximum) | &maximum) |
touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y", touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
input_abs_get_fuzz(input, axis), input_abs_get_fuzz(input, axis_y),
&fuzz); &fuzz);
if (data_present) if (data_present)
touchscreen_set_params(input, axis, minimum, maximum - 1, fuzz); touchscreen_set_params(input, axis_y, minimum, maximum - 1, fuzz);
axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE; axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE;
data_present = touchscreen_get_prop_u32(dev, data_present = touchscreen_get_prop_u32(dev,
...@@ -117,15 +118,13 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, ...@@ -117,15 +118,13 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
if (!prop) if (!prop)
return; return;
axis = multitouch ? ABS_MT_POSITION_X : ABS_X; prop->max_x = input_abs_get_max(input, axis_x);
prop->max_y = input_abs_get_max(input, axis_y);
prop->max_x = input_abs_get_max(input, axis);
prop->max_y = input_abs_get_max(input, axis + 1);
prop->invert_x = prop->invert_x =
device_property_read_bool(dev, "touchscreen-inverted-x"); device_property_read_bool(dev, "touchscreen-inverted-x");
if (prop->invert_x) { if (prop->invert_x) {
absinfo = &input->absinfo[axis]; absinfo = &input->absinfo[axis_x];
absinfo->maximum -= absinfo->minimum; absinfo->maximum -= absinfo->minimum;
absinfo->minimum = 0; absinfo->minimum = 0;
} }
...@@ -133,7 +132,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, ...@@ -133,7 +132,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
prop->invert_y = prop->invert_y =
device_property_read_bool(dev, "touchscreen-inverted-y"); device_property_read_bool(dev, "touchscreen-inverted-y");
if (prop->invert_y) { if (prop->invert_y) {
absinfo = &input->absinfo[axis + 1]; absinfo = &input->absinfo[axis_y];
absinfo->maximum -= absinfo->minimum; absinfo->maximum -= absinfo->minimum;
absinfo->minimum = 0; absinfo->minimum = 0;
} }
...@@ -141,7 +140,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch, ...@@ -141,7 +140,7 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
prop->swap_x_y = prop->swap_x_y =
device_property_read_bool(dev, "touchscreen-swapped-x-y"); device_property_read_bool(dev, "touchscreen-swapped-x-y");
if (prop->swap_x_y) if (prop->swap_x_y)
swap(input->absinfo[axis], input->absinfo[axis + 1]); swap(input->absinfo[axis_x], input->absinfo[axis_y]);
} }
EXPORT_SYMBOL(touchscreen_parse_properties); EXPORT_SYMBOL(touchscreen_parse_properties);
......
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
/* /*
* Input event codes * Input event codes
* *
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment