Commit 9ecca12e authored by Marcin Malagowski's avatar Marcin Malagowski Committed by Jonathan Cameron

iio: pressure: Add driver for Honeywell ABP family

This patch adds minimal driver for the Honeywell Amplified Basic
Pressure sensors series. Sensors are pretty simple but are
available in many variants:
- psi/mbar/kPa output,
- analog/i2c/spi,
- gage/differential measurement,
- different measure ranges etc.

Refer to datasheets for more details:
http://sensing.honeywell.com/honeywell-sensing-basic-board-mount-pressure-sensors-abp-series-datasheet-323005128-c-en.pdf
http://sensing.honeywell.com/index.php%3Fci_id%3D45841

Driver internals:
- i2c only. measure request is done by the SMBUS QUICK cmd, so if the i2c
  bus doesn't support it, it is required to send a dummy byte to trigger
  measurement,
- since iio sysfs expects kilopascals, mbar-variants are treated as their
  respective kPa-s, hence i2c id-table has doubled entries in one line:
	{ "abp060mg", ABP006KG }, { "abp006kg", ABP006KG },
- psi-variants have prescaled values in config,
- no temperature reads yet.

Work remained:
- optional temperature channel,
- SPI support,
- DT binding.

Changes since v1:
- mutex is now locked in read_raw(),
- corrected error codes,
- fixed coding style issues,
- renamed few defines and functions abp -> abp060mg
(some structs left as they were to keep the sensible meaning).
Signed-off-by: default avatarMarcin Malagowski <mrc@bourne.st>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 00053566
...@@ -5,6 +5,16 @@ ...@@ -5,6 +5,16 @@
menu "Pressure sensors" menu "Pressure sensors"
config ABP060MG
tristate "Honeywell ABP pressure sensor driver"
depends on I2C
help
Say yes here to build support for the Honeywell ABP pressure
sensors.
To compile this driver as a module, choose M here: the module
will be called abp060mg.
config BMP280 config BMP280
tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
depends on (I2C || SPI_MASTER) depends on (I2C || SPI_MASTER)
......
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
# #
# When adding new entries keep the list in alphabetical order # When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ABP060MG) += abp060mg.o
obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_BMP280) += bmp280.o
bmp280-objs := bmp280-core.o bmp280-regmap.o bmp280-objs := bmp280-core.o bmp280-regmap.o
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
......
/*
* Copyright (C) 2016 - Marcin Malagowski <mrc@bourne.st>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#define ABP060MG_ERROR_MASK 0xC000
#define ABP060MG_RESP_TIME_MS 40
#define ABP060MG_MIN_COUNTS 1638 /* = 0x0666 (10% of u14) */
#define ABP060MG_MAX_COUNTS 14745 /* = 0x3999 (90% of u14) */
#define ABP060MG_NUM_COUNTS (ABP060MG_MAX_COUNTS - ABP060MG_MIN_COUNTS)
enum abp_variant {
/* gage [kPa] */
ABP006KG, ABP010KG, ABP016KG, ABP025KG, ABP040KG, ABP060KG, ABP100KG,
ABP160KG, ABP250KG, ABP400KG, ABP600KG, ABP001GG,
/* differential [kPa] */
ABP006KD, ABP010KD, ABP016KD, ABP025KD, ABP040KD, ABP060KD, ABP100KD,
ABP160KD, ABP250KD, ABP400KD,
/* gage [psi] */
ABP001PG, ABP005PG, ABP015PG, ABP030PG, ABP060PG, ABP100PG, ABP150PG,
/* differential [psi] */
ABP001PD, ABP005PD, ABP015PD, ABP030PD, ABP060PD,
};
struct abp_config {
int min;
int max;
};
static struct abp_config abp_config[] = {
/* mbar & kPa variants */
[ABP006KG] = { .min = 0, .max = 6000 },
[ABP010KG] = { .min = 0, .max = 10000 },
[ABP016KG] = { .min = 0, .max = 16000 },
[ABP025KG] = { .min = 0, .max = 25000 },
[ABP040KG] = { .min = 0, .max = 40000 },
[ABP060KG] = { .min = 0, .max = 60000 },
[ABP100KG] = { .min = 0, .max = 100000 },
[ABP160KG] = { .min = 0, .max = 160000 },
[ABP250KG] = { .min = 0, .max = 250000 },
[ABP400KG] = { .min = 0, .max = 400000 },
[ABP600KG] = { .min = 0, .max = 600000 },
[ABP001GG] = { .min = 0, .max = 1000000 },
[ABP006KD] = { .min = -6000, .max = 6000 },
[ABP010KD] = { .min = -10000, .max = 10000 },
[ABP016KD] = { .min = -16000, .max = 16000 },
[ABP025KD] = { .min = -25000, .max = 25000 },
[ABP040KD] = { .min = -40000, .max = 40000 },
[ABP060KD] = { .min = -60000, .max = 60000 },
[ABP100KD] = { .min = -100000, .max = 100000 },
[ABP160KD] = { .min = -160000, .max = 160000 },
[ABP250KD] = { .min = -250000, .max = 250000 },
[ABP400KD] = { .min = -400000, .max = 400000 },
/* psi variants (1 psi ~ 6895 Pa) */
[ABP001PG] = { .min = 0, .max = 6985 },
[ABP005PG] = { .min = 0, .max = 34474 },
[ABP015PG] = { .min = 0, .max = 103421 },
[ABP030PG] = { .min = 0, .max = 206843 },
[ABP060PG] = { .min = 0, .max = 413686 },
[ABP100PG] = { .min = 0, .max = 689476 },
[ABP150PG] = { .min = 0, .max = 1034214 },
[ABP001PD] = { .min = -6895, .max = 6895 },
[ABP005PD] = { .min = -34474, .max = 34474 },
[ABP015PD] = { .min = -103421, .max = 103421 },
[ABP030PD] = { .min = -206843, .max = 206843 },
[ABP060PD] = { .min = -413686, .max = 413686 },
};
struct abp_state {
struct i2c_client *client;
struct mutex lock;
/*
* bus-dependent MEASURE_REQUEST length.
* If no SMBUS_QUICK support, need to send dummy byte
*/
int mreq_len;
/* model-dependent values (calculated on probe) */
int scale;
int offset;
};
static const struct iio_chan_spec abp060mg_channels[] = {
{
.type = IIO_PRESSURE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE),
},
};
static int abp060mg_get_measurement(struct abp_state *state, int *val)
{
struct i2c_client *client = state->client;
__be16 buf[2];
u16 pressure;
int ret;
buf[0] = 0;
ret = i2c_master_send(client, (u8 *)&buf, state->mreq_len);
if (ret < 0)
return ret;
msleep_interruptible(ABP060MG_RESP_TIME_MS);
ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf));
if (ret < 0)
return ret;
pressure = be16_to_cpu(buf[0]);
if (pressure & ABP060MG_ERROR_MASK)
return -EIO;
if (pressure < ABP060MG_MIN_COUNTS || pressure > ABP060MG_MAX_COUNTS)
return -EIO;
*val = pressure;
return IIO_VAL_INT;
}
static int abp060mg_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
struct abp_state *state = iio_priv(indio_dev);
int ret;
mutex_lock(&state->lock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = abp060mg_get_measurement(state, val);
break;
case IIO_CHAN_INFO_OFFSET:
*val = state->offset;
ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
*val = state->scale;
*val2 = ABP060MG_NUM_COUNTS * 1000; /* to kPa */
ret = IIO_VAL_FRACTIONAL;
break;
default:
ret = -EINVAL;
break;
}
mutex_unlock(&state->lock);
return ret;
}
static const struct iio_info abp060mg_info = {
.driver_module = THIS_MODULE,
.read_raw = abp060mg_read_raw,
};
static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id)
{
struct abp_state *state = iio_priv(indio_dev);
struct abp_config *cfg = &abp_config[id];
state->scale = cfg->max - cfg->min;
state->offset = -ABP060MG_MIN_COUNTS;
if (cfg->min < 0) /* differential */
state->offset -= ABP060MG_NUM_COUNTS >> 1;
}
static int abp060mg_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
struct abp_state *state;
unsigned long cfg_id = id->driver_data;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state));
if (!indio_dev)
return -ENOMEM;
state = iio_priv(indio_dev);
i2c_set_clientdata(client, state);
state->client = client;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK))
state->mreq_len = 1;
abp060mg_init_device(indio_dev, cfg_id);
indio_dev->dev.parent = &client->dev;
indio_dev->name = dev_name(&client->dev);
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &abp060mg_info;
indio_dev->channels = abp060mg_channels;
indio_dev->num_channels = ARRAY_SIZE(abp060mg_channels);
mutex_init(&state->lock);
return devm_iio_device_register(&client->dev, indio_dev);
}
static const struct i2c_device_id abp060mg_id_table[] = {
/* mbar & kPa variants (abp060m [60 mbar] == abp006k [6 kPa]) */
/* gage: */
{ "abp060mg", ABP006KG }, { "abp006kg", ABP006KG },
{ "abp100mg", ABP010KG }, { "abp010kg", ABP010KG },
{ "abp160mg", ABP016KG }, { "abp016kg", ABP016KG },
{ "abp250mg", ABP025KG }, { "abp025kg", ABP025KG },
{ "abp400mg", ABP040KG }, { "abp040kg", ABP040KG },
{ "abp600mg", ABP060KG }, { "abp060kg", ABP060KG },
{ "abp001bg", ABP100KG }, { "abp100kg", ABP100KG },
{ "abp1_6bg", ABP160KG }, { "abp160kg", ABP160KG },
{ "abp2_5bg", ABP250KG }, { "abp250kg", ABP250KG },
{ "abp004bg", ABP400KG }, { "abp400kg", ABP400KG },
{ "abp006bg", ABP600KG }, { "abp600kg", ABP600KG },
{ "abp010bg", ABP001GG }, { "abp001gg", ABP001GG },
/* differential: */
{ "abp060md", ABP006KD }, { "abp006kd", ABP006KD },
{ "abp100md", ABP010KD }, { "abp010kd", ABP010KD },
{ "abp160md", ABP016KD }, { "abp016kd", ABP016KD },
{ "abp250md", ABP025KD }, { "abp025kd", ABP025KD },
{ "abp400md", ABP040KD }, { "abp040kd", ABP040KD },
{ "abp600md", ABP060KD }, { "abp060kd", ABP060KD },
{ "abp001bd", ABP100KD }, { "abp100kd", ABP100KD },
{ "abp1_6bd", ABP160KD }, { "abp160kd", ABP160KD },
{ "abp2_5bd", ABP250KD }, { "abp250kd", ABP250KD },
{ "abp004bd", ABP400KD }, { "abp400kd", ABP400KD },
/* psi variants */
/* gage: */
{ "abp001pg", ABP001PG },
{ "abp005pg", ABP005PG },
{ "abp015pg", ABP015PG },
{ "abp030pg", ABP030PG },
{ "abp060pg", ABP060PG },
{ "abp100pg", ABP100PG },
{ "abp150pg", ABP150PG },
/* differential: */
{ "abp001pd", ABP001PD },
{ "abp005pd", ABP005PD },
{ "abp015pd", ABP015PD },
{ "abp030pd", ABP030PD },
{ "abp060pd", ABP060PD },
{ /* empty */ },
};
MODULE_DEVICE_TABLE(i2c, abp060mg_id_table);
static struct i2c_driver abp060mg_driver = {
.driver = {
.name = "abp060mg",
},
.probe = abp060mg_probe,
.id_table = abp060mg_id_table,
};
module_i2c_driver(abp060mg_driver);
MODULE_AUTHOR("Marcin Malagowski <mrc@bourne.st>");
MODULE_DESCRIPTION("Honeywell ABP pressure sensor driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment