Commit 9ed2c993 authored by Marek Olšák's avatar Marek Olšák Committed by Alex Deucher

drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)

v2: update emit_ib_size
(though it's still wrong because it was wrong before)
Signed-off-by: default avatarMarek Olšák <marek.olsak@amd.com>
Acked-by: default avatarChristian König <christian.koenig@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 535cfa75
......@@ -31,7 +31,8 @@ struct amdgpu_gds {
uint32_t gds_size;
uint32_t gws_size;
uint32_t oa_size;
uint32_t gds_compute_max_wave_id;
uint32_t gds_compute_max_wave_id;
uint32_t vgt_gs_max_wave_id;
};
struct amdgpu_gds_reg_offset {
......
......@@ -4197,6 +4197,15 @@ static void gfx_v10_0_ring_emit_ib_gfx(struct amdgpu_ring *ring,
unsigned vmid = AMDGPU_JOB_GET_VMID(job);
u32 header, control = 0;
/* Prevent a hw deadlock due to a wave ID mismatch between ME and GDS.
* This resets the wave ID counters. (needed by transform feedback)
* TODO: This might only be needed on a VMID switch when we change
* the GDS OA mapping, not sure.
*/
amdgpu_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1));
amdgpu_ring_write(ring, mmVGT_GS_MAX_WAVE_ID);
amdgpu_ring_write(ring, ring->adev->gds.vgt_gs_max_wave_id);
if (ib->flags & AMDGPU_IB_FLAG_CE)
header = PACKET3(PACKET3_INDIRECT_BUFFER_CNST, 2);
else
......@@ -4930,7 +4939,7 @@ static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_gfx = {
5 + /* HDP_INVL */
8 + 8 + /* FENCE x2 */
2, /* SWITCH_BUFFER */
.emit_ib_size = 4, /* gfx_v10_0_ring_emit_ib_gfx */
.emit_ib_size = 7, /* gfx_v10_0_ring_emit_ib_gfx */
.emit_ib = gfx_v10_0_ring_emit_ib_gfx,
.emit_fence = gfx_v10_0_ring_emit_fence,
.emit_pipeline_sync = gfx_v10_0_ring_emit_pipeline_sync,
......@@ -5078,10 +5087,9 @@ static void gfx_v10_0_set_gds_init(struct amdgpu_device *adev)
/* init asic gds info */
switch (adev->asic_type) {
case CHIP_NAVI10:
adev->gds.gds_size = 0x10000;
break;
default:
adev->gds.gds_size = 0x10000;
adev->gds.vgt_gs_max_wave_id = 0x3ff;
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment