ASoC: tas2781: Add tas2563 into driver

Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to downloading
corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-4-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/tas2781-i2c.c

 // SPDX-License-Identifier: GPL-2.0
 //
-// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier
+// ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier
 //
 // Copyright (C) 2022 - 2023 Texas Instruments Incorporated
 // https://www.ti.com
 //
-// The TAS2781 driver implements a flexible and configurable
+// The TAS2563/TAS2781 driver implements a flexible and configurable
 // algo coefficient setting for one, two, or even multiple
-// TAS2781 chips.
+// TAS2563/TAS2781 chips.
 //
 // Author: Shenghao Ding <shenghao-ding@ti.com>
 // Author: Kevin Lu <kevin-lu@ti.com>
@@ -32,6 +32,7 @@
 #include <sound/tas2781-tlv.h>
 
 static const struct i2c_device_id tasdevice_id[] = {
+	{ "tas2563", TAS2563 },
 	{ "tas2781", TAS2781 },
 	{}
 };
@@ -39,6 +40,7 @@ MODULE_DEVICE_TABLE(i2c, tasdevice_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id tasdevice_of_match[] = {
+	{ .compatible = "ti,tas2563" },
 	{ .compatible = "ti,tas2781" },
 	{},
 };