Commit 9f2f381f authored by Jeff Kirsher's avatar Jeff Kirsher

macb: Move the Atmel driver

Move the Atmel driver into drivers/net/ethernet/cadence/ and
make the necessary Kconfig and Makefile changes.

CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: default avatarJamie Iles <jamie@jamieiles.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 7b35f033
......@@ -1323,7 +1323,7 @@ F: include/video/atmel_lcdc.h
ATMEL MACB ETHERNET DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/net/macb.*
F: drivers/net/ethernet/cadence/
ATMEL SPI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
......
......@@ -2,9 +2,6 @@
# Network device configuration
#
config HAVE_NET_MACB
bool
menuconfig NETDEVICES
default y if UML
depends on NET
......@@ -224,19 +221,6 @@ menuconfig NET_ETHERNET
if NET_ETHERNET
config MACB
tristate "Atmel MACB support"
depends on HAVE_NET_MACB
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
parts. Say Y to include support for the MACB chip.
To compile this driver as a module, choose M here: the module
will be called macb.
source "drivers/net/arm/Kconfig"
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
......
......@@ -63,9 +63,6 @@ obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_TR) += tokenring/
......
#
# Acorn Network device configuration
# These are for Acorn's Expansion card network interfaces
#
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on ARM && ARCH_AT91RM9200
select MII
help
If you wish to compile a kernel for the AT91RM9200 and enable
ethernet support, then you should always answer Y to this.
# File: drivers/net/arm/Makefile
#
# Makefile for the ARM network device drivers
#
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
......@@ -15,6 +15,7 @@ source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/atheros/Kconfig"
source "drivers/net/ethernet/cadence/Kconfig"
source "drivers/net/ethernet/adi/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
......
......@@ -7,6 +7,7 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
obj-$(CONFIG_NET_ATMEL) += cadence/
obj-$(CONFIG_NET_BFIN) += adi/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
......
#
# Atmel device configuration
#
config HAVE_NET_MACB
bool
config NET_ATMEL
bool "Atmel devices"
depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
Make sure you know the name of your card. Read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
If unsure, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the remaining Atmel network card questions. If you say Y, you will be
asked for your specific card in the following questions.
if NET_ATMEL
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on ARM && ARCH_AT91RM9200
select MII
---help---
If you wish to compile a kernel for the AT91RM9200 and enable
ethernet support, then you should always answer Y to this.
config MACB
tristate "Atmel MACB support"
depends on HAVE_NET_MACB
select PHYLIB
---help---
The Atmel MACB ethernet interface is found on many AT32 and AT91
parts. Say Y to include support for the MACB chip.
To compile this driver as a module, choose M here: the module
will be called macb.
endif # NET_ATMEL
#
# Makefile for the Atmel network device drivers.
#
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_MACB) += macb.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment