Commit 9fa0853a authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: rfkill: add support for input key to control wireless radio
  [NET] net/core: Fix error handling
  [TG3]: Update version and reldate.
  [TG3]: Eliminate spurious interrupts.
  [TG3]: Add ASPM workaround.
  [Bluetooth] Correct SCO buffer for another Broadcom based dongle
  [Bluetooth] Add support for Targus ACB10US USB dongle
  [Bluetooth] Disconnect L2CAP connection after last RFCOMM DLC
  [Bluetooth] Check that device is in rfcomm_dev_list before deleting
  [Bluetooth] Use in-kernel sockets API
  [Bluetooth] Attach host adapters to the Bluetooth bus
  [Bluetooth] Fix L2CAP and HCI setsockopt() information leaks
parents ef93127e cf4328cd
......@@ -114,10 +114,16 @@ static struct usb_device_id blacklist_ids[] = {
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 },
/* Broadcom BCM2045 */
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_WRONG_SCO_MTU },
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_WRONG_SCO_MTU },
/* Targus ACB10US */
{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = HCI_RESET },
/* ANYCOM Bluetooth USB-200 and USB-250 */
{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET },
......
......@@ -64,8 +64,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "3.75"
#define DRV_MODULE_RELDATE "March 23, 2007"
#define DRV_MODULE_VERSION "3.76"
#define DRV_MODULE_RELDATE "May 5, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
......@@ -3019,6 +3019,16 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
}
}
if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND) {
u32 val = tr32(PCIE_PWR_MGMT_THRESH);
if (!netif_carrier_ok(tp->dev))
val = (val & ~PCIE_PWR_MGMT_L1_THRESH_MSK) |
tp->pwrmgmt_thresh;
else
val |= PCIE_PWR_MGMT_L1_THRESH_MSK;
tw32(PCIE_PWR_MGMT_THRESH, val);
}
return err;
}
......@@ -3580,8 +3590,12 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id)
* Writing non-zero to intr-mbox-0 additional tells the
* NIC to stop sending us irqs, engaging "in-intr-handler"
* event coalescing.
*
* Flush the mailbox to de-assert the IRQ immediately to prevent
* spurious interrupts. The flush impacts performance but
* excessive spurious interrupts can be worse in some cases.
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
if (tg3_irq_sync(tp))
goto out;
sblk->status &= ~SD_STATUS_UPDATED;
......@@ -3625,8 +3639,12 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
* writing non-zero to intr-mbox-0 additional tells the
* NIC to stop sending us irqs, engaging "in-intr-handler"
* event coalescing.
*
* Flush the mailbox to de-assert the IRQ immediately to prevent
* spurious interrupts. The flush impacts performance but
* excessive spurious interrupts can be worse in some cases.
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
if (tg3_irq_sync(tp))
goto out;
if (netif_rx_schedule_prep(dev)) {
......@@ -10004,6 +10022,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
}
if (tr32(VCPU_CFGSHDW) & VCPU_CFGSHDW_ASPM_DBNC)
tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
return;
}
......@@ -10131,6 +10151,14 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
/* bootcode if bit 18 is set */
if (cfg2 & (1 << 18))
tp->tg3_flags2 |= TG3_FLG2_SERDES_PREEMPHASIS;
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
u32 cfg3;
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_3, &cfg3);
if (cfg3 & NIC_SRAM_ASPM_DEBOUNCE)
tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
}
}
}
......@@ -10998,6 +11026,10 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
*/
tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND)
tp->pwrmgmt_thresh = tr32(PCIE_PWR_MGMT_THRESH) &
PCIE_PWR_MGMT_L1_THRESH_MSK;
return err;
}
......
......@@ -1150,6 +1150,9 @@
#define VCPU_STATUS_INIT_DONE 0x04000000
#define VCPU_STATUS_DRV_RESET 0x08000000
#define VCPU_CFGSHDW 0x00005104
#define VCPU_CFGSHDW_ASPM_DBNC 0x00001000
/* Mailboxes */
#define GRCMBOX_BASE 0x00005600
#define GRCMBOX_INTERRUPT_0 0x00005800 /* 64-bit */
......@@ -1507,6 +1510,8 @@
#define PCIE_TRANS_CFG_1SHOT_MSI 0x20000000
#define PCIE_TRANS_CFG_LOM 0x00000020
#define PCIE_PWR_MGMT_THRESH 0x00007d28
#define PCIE_PWR_MGMT_L1_THRESH_MSK 0x0000ff00
#define TG3_EEPROM_MAGIC 0x669955aa
#define TG3_EEPROM_MAGIC_FW 0xa5000000
......@@ -1593,6 +1598,9 @@
#define SHASTA_EXT_LED_MAC 0x00010000
#define SHASTA_EXT_LED_COMBO 0x00018000
#define NIC_SRAM_DATA_CFG_3 0x00000d3c
#define NIC_SRAM_ASPM_DEBOUNCE 0x00000002
#define NIC_SRAM_RX_MINI_BUFFER_DESC 0x00001000
#define NIC_SRAM_DMA_DESC_POOL_BASE 0x00002000
......@@ -2200,6 +2208,7 @@ struct tg3 {
#define TG3_FLAG_USE_LINKCHG_REG 0x00000008
#define TG3_FLAG_USE_MI_INTERRUPT 0x00000010
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_ASPM_WORKAROUND 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
#define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100
#define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200
......@@ -2288,6 +2297,7 @@ struct tg3 {
u32 grc_local_ctrl;
u32 dma_rwctrl;
u32 coalesce_mode;
u32 pwrmgmt_thresh;
/* PCI block */
u16 pci_chip_rev_id;
......
#ifndef __RFKILL_H
#define __RFKILL_H
/*
* Copyright (C) 2006 Ivo van Doorn
* Copyright (C) 2007 Dmitry Torokhov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/device.h>
/**
* enum rfkill_type - type of rfkill switch.
* RFKILL_TYPE_WLAN: switch is no a Wireless network devices.
* RFKILL_TYPE_BlUETOOTH: switch is on a bluetooth device.
* RFKILL_TYPE_IRDA: switch is on an infrared devices.
*/
enum rfkill_type {
RFKILL_TYPE_WLAN = 0,
RFKILL_TYPE_BLUETOOTH = 1,
RFKILL_TYPE_IRDA = 2,
RFKILL_TYPE_MAX = 3,
};
enum rfkill_state {
RFKILL_STATE_OFF = 0,
RFKILL_STATE_ON = 1,
};
/**
* struct rfkill - rfkill control structure.
* @name: Name of the switch.
* @type: Radio type which the button controls, the value stored
* here should be a value from enum rfkill_type.
* @state: State of the switch (on/off).
* @user_claim: Set when the switch is controlled exlusively by userspace.
* @mutex: Guards switch state transitions
* @data: Pointer to the RF button drivers private data which will be
* passed along when toggling radio state.
* @toggle_radio(): Mandatory handler to control state of the radio.
* @dev: Device structure integrating the switch into device tree.
* @node: Used to place switch into list of all switches known to the
* the system.
*
* This structure represents a RF switch located on a network device.
*/
struct rfkill {
char *name;
enum rfkill_type type;
enum rfkill_state state;
bool user_claim;
struct mutex mutex;
void *data;
int (*toggle_radio)(void *data, enum rfkill_state state);
struct device dev;
struct list_head node;
};
#define to_rfkill(d) container_of(d, struct rfkill, dev)
struct rfkill *rfkill_allocate(struct device *parent, enum rfkill_type type);
void rfkill_free(struct rfkill *rfkill);
int rfkill_register(struct rfkill *rfkill);
void rfkill_unregister(struct rfkill *rfkill);
void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state);
#endif /* RFKILL_H */
......@@ -225,6 +225,8 @@ source "net/ieee80211/Kconfig"
endmenu
source "net/rfkill/Kconfig"
endif # if NET
endmenu # Networking
......@@ -51,6 +51,7 @@ obj-$(CONFIG_IEEE80211) += ieee80211/
obj-$(CONFIG_TIPC) += tipc/
obj-$(CONFIG_NETLABEL) += netlabel/
obj-$(CONFIG_IUCV) += iucv/
obj-$(CONFIG_RFKILL) += rfkill/
ifeq ($(CONFIG_NET),y)
obj-$(CONFIG_SYSCTL) += sysctl_net.o
......
......@@ -499,6 +499,15 @@ static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char
break;
case HCI_FILTER:
{
struct hci_filter *f = &hci_pi(sk)->filter;
uf.type_mask = f->type_mask;
uf.opcode = f->opcode;
uf.event_mask[0] = *((u32 *) f->event_mask + 0);
uf.event_mask[1] = *((u32 *) f->event_mask + 1);
}
len = min_t(unsigned int, len, sizeof(uf));
if (copy_from_user(&uf, optval, len)) {
err = -EFAULT;
......
......@@ -305,7 +305,7 @@ int hci_register_sysfs(struct hci_dev *hdev)
BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
dev->class = bt_class;
dev->bus = &bt_bus;
dev->parent = hdev->parent;
strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
......@@ -322,6 +322,10 @@ int hci_register_sysfs(struct hci_dev *hdev)
if (device_create_file(dev, bt_attrs[i]) < 0)
BT_ERR("Failed to create device attribute");
if (sysfs_create_link(&bt_class->subsys.kset.kobj,
&dev->kobj, kobject_name(&dev->kobj)) < 0)
BT_ERR("Failed to create class symlink");
return 0;
}
......@@ -329,6 +333,9 @@ void hci_unregister_sysfs(struct hci_dev *hdev)
{
BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
sysfs_remove_link(&bt_class->subsys.kset.kobj,
kobject_name(&hdev->dev.kobj));
device_del(&hdev->dev);
}
......
......@@ -954,11 +954,17 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, ch
switch (optname) {
case L2CAP_OPTIONS:
opts.imtu = l2cap_pi(sk)->imtu;
opts.omtu = l2cap_pi(sk)->omtu;
opts.flush_to = l2cap_pi(sk)->flush_to;
opts.mode = 0x00;
len = min_t(unsigned int, sizeof(opts), optlen);
if (copy_from_user((char *) &opts, optval, len)) {
err = -EFAULT;
break;
}
l2cap_pi(sk)->imtu = opts.imtu;
l2cap_pi(sk)->omtu = opts.omtu;
break;
......
......@@ -622,7 +622,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst
bacpy(&addr.l2_bdaddr, src);
addr.l2_family = AF_BLUETOOTH;
addr.l2_psm = 0;
*err = sock->ops->bind(sock, (struct sockaddr *) &addr, sizeof(addr));
*err = kernel_bind(sock, (struct sockaddr *) &addr, sizeof(addr));
if (*err < 0)
goto failed;
......@@ -643,7 +643,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst
bacpy(&addr.l2_bdaddr, dst);
addr.l2_family = AF_BLUETOOTH;
addr.l2_psm = htobs(RFCOMM_PSM);
*err = sock->ops->connect(sock, (struct sockaddr *) &addr, sizeof(addr), O_NONBLOCK);
*err = kernel_connect(sock, (struct sockaddr *) &addr, sizeof(addr), O_NONBLOCK);
if (*err == 0 || *err == -EINPROGRESS)
return s;
......@@ -1058,6 +1058,12 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci)
case BT_DISCONN:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, 0);
if (list_empty(&s->dlcs)) {
s->state = BT_DISCONN;
rfcomm_send_disc(s, 0);
}
break;
}
} else {
......@@ -1067,6 +1073,10 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci)
s->state = BT_CONNECTED;
rfcomm_process_connect(s);
break;
case BT_DISCONN:
rfcomm_session_put(s);
break;
}
}
return 0;
......@@ -1757,19 +1767,12 @@ static inline void rfcomm_accept_connection(struct rfcomm_session *s)
BT_DBG("session %p", s);
if (sock_create_lite(PF_BLUETOOTH, sock->type, BTPROTO_L2CAP, &nsock))
err = kernel_accept(sock, &nsock, O_NONBLOCK);
if (err < 0)
return;
nsock->ops = sock->ops;
__module_get(nsock->ops->owner);
err = sock->ops->accept(sock, nsock, O_NONBLOCK);
if (err < 0) {
sock_release(nsock);
return;
}
/* Set our callbacks */
nsock->sk->sk_data_ready = rfcomm_l2data_ready;
nsock->sk->sk_state_change = rfcomm_l2state_change;
......@@ -1885,7 +1888,7 @@ static int rfcomm_add_listener(bdaddr_t *ba)
bacpy(&addr.l2_bdaddr, ba);
addr.l2_family = AF_BLUETOOTH;
addr.l2_psm = htobs(RFCOMM_PSM);
err = sock->ops->bind(sock, (struct sockaddr *) &addr, sizeof(addr));
err = kernel_bind(sock, (struct sockaddr *) &addr, sizeof(addr));
if (err < 0) {
BT_ERR("Bind failed %d", err);
goto failed;
......@@ -1898,7 +1901,7 @@ static int rfcomm_add_listener(bdaddr_t *ba)
release_sock(sk);
/* Start listening on the socket */
err = sock->ops->listen(sock, 10);
err = kernel_listen(sock, 10);
if (err) {
BT_ERR("Listen failed %d", err);
goto failed;
......
......@@ -517,9 +517,10 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
if (dlc->state == BT_CLOSED) {
if (!dev->tty) {
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
rfcomm_dev_hold(dev);
rfcomm_dev_del(dev);
if (rfcomm_dev_get(dev->id) == NULL)
return;
rfcomm_dev_del(dev);
/* We have to drop DLC lock here, otherwise
rfcomm_dev_put() will dead lock if it's
the last reference. */
......@@ -974,8 +975,12 @@ static void rfcomm_tty_hangup(struct tty_struct *tty)
rfcomm_tty_flush_buffer(tty);
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags))
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
if (rfcomm_dev_get(dev->id) == NULL)
return;
rfcomm_dev_del(dev);
rfcomm_dev_put(dev);
}
}
static int rfcomm_tty_read_proc(char *buf, char **start, off_t offset, int len, int *eof, void *unused)
......
......@@ -2377,9 +2377,9 @@ static int __init dev_proc_init(void)
out:
return rc;
out_softnet:
proc_net_remove("softnet_stat");
out_dev2:
proc_net_remove("ptype");
out_dev2:
proc_net_remove("softnet_stat");
out_dev:
proc_net_remove("dev");
goto out;
......
#
# RF switch subsystem configuration
#
menuconfig RFKILL
tristate "RF switch subsystem support"
help
Say Y here if you want to have control over RF switches
found on many WiFi, Bluetooth and IRDA cards.
To compile this driver as a module, choose M here: the
module will be called rfkill.
config RFKILL_INPUT
tristate "Input layer to RF switch connector"
depends on RFKILL && INPUT
help
Say Y here if you want kernel automatically toggle state
of RF switches on and off when user presses appropriate
button or a key on the keyboard. Without this module you
need a some kind of userspace application to control
state of the switches.
To compile this driver as a module, choose M here: the
module will be called rfkill-input.
#
# Makefile for the RF switch subsystem.
#
obj-$(CONFIG_RFKILL) += rfkill.o
obj-$(CONFIG_RFKILL_INPUT) += rfkill-input.o
/*
* Input layer to RF Kill interface connector
*
* Copyright (c) 2007 Dmitry Torokhov
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/rfkill.h>
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
MODULE_DESCRIPTION("Input layer to RF switch connector");
MODULE_LICENSE("GPL");
struct rfkill_task {
struct work_struct work;
enum rfkill_type type;
struct mutex mutex; /* ensures that task is serialized */
spinlock_t lock; /* for accessing last and desired state */
unsigned long last; /* last schedule */
enum rfkill_state desired_state; /* on/off */
enum rfkill_state current_state; /* on/off */
};
static void rfkill_task_handler(struct work_struct *work)
{
struct rfkill_task *task = container_of(work, struct rfkill_task, work);
enum rfkill_state state;
mutex_lock(&task->mutex);
/*
* Use temp variable to fetch desired state to keep it
* consistent even if rfkill_schedule_toggle() runs in
* another thread or interrupts us.
*/
state = task->desired_state;
if (state != task->current_state) {
rfkill_switch_all(task->type, state);
task->current_state = state;
}
mutex_unlock(&task->mutex);
}
static void rfkill_schedule_toggle(struct rfkill_task *task)
{
unsigned int flags;
spin_lock_irqsave(&task->lock, flags);
if (time_after(jiffies, task->last + msecs_to_jiffies(200))) {
task->desired_state = !task->desired_state;
task->last = jiffies;
schedule_work(&task->work);
}
spin_unlock_irqrestore(&task->lock, flags);
}
#define DEFINE_RFKILL_TASK(n, t) \
struct rfkill_task n = { \
.work = __WORK_INITIALIZER(n.work, \
rfkill_task_handler), \
.type = t, \
.mutex = __MUTEX_INITIALIZER(n.mutex), \
.lock = __SPIN_LOCK_UNLOCKED(n.lock), \
.desired_state = RFKILL_STATE_ON, \
.current_state = RFKILL_STATE_ON, \
}
static DEFINE_RFKILL_TASK(rfkill_wlan, RFKILL_TYPE_WLAN);
static DEFINE_RFKILL_TASK(rfkill_bt, RFKILL_TYPE_BLUETOOTH);
static void rfkill_event(struct input_handle *handle, unsigned int type,
unsigned int code, int down)
{
if (type == EV_KEY && down == 1) {
switch (code) {
case KEY_WLAN:
rfkill_schedule_toggle(&rfkill_wlan);
break;
case KEY_BLUETOOTH:
rfkill_schedule_toggle(&rfkill_bt);
break;
default:
break;
}
}
}
static int rfkill_connect(struct input_handler *handler, struct input_dev *dev,
const struct input_device_id *id)
{
struct input_handle *handle;
int error;
handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
if (!handle)
return -ENOMEM;
handle->dev = dev;
handle->handler = handler;
handle->name = "rfkill";
error = input_register_handle(handle);
if (error)
goto err_free_handle;
error = input_open_device(handle);
if (error)
goto err_unregister_handle;
return 0;
err_unregister_handle:
input_unregister_handle(handle);
err_free_handle:
kfree(handle);
return error;
}
static void rfkill_disconnect(struct input_handle *handle)
{
input_close_device(handle);
input_unregister_handle(handle);
kfree(handle);
}
static const struct input_device_id rfkill_ids[] = {
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT(EV_KEY) },
.keybit = { [LONG(KEY_WLAN)] = BIT(KEY_WLAN) },
},
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT(EV_KEY) },
.keybit = { [LONG(KEY_BLUETOOTH)] = BIT(KEY_BLUETOOTH) },
},
{ }
};
static struct input_handler rfkill_handler = {
.event = rfkill_event,
.connect = rfkill_connect,
.disconnect = rfkill_disconnect,
.name = "rfkill",
.id_table = rfkill_ids,
};
static int __init rfkill_handler_init(void)
{
return input_register_handler(&rfkill_handler);
}
static void __exit rfkill_handler_exit(void)
{
input_unregister_handler(&rfkill_handler);
flush_scheduled_work();
}
module_init(rfkill_handler_init);
module_exit(rfkill_handler_exit);
/*
* Copyright (C) 2006 Ivo van Doorn
* Copyright (C) 2007 Dmitry Torokhov
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/workqueue.h>
#include <linux/capability.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rfkill.h>
MODULE_AUTHOR("Ivo van Doorn <IvDoorn@gmail.com>");
MODULE_VERSION("1.0");
MODULE_DESCRIPTION("RF switch support");
MODULE_LICENSE("GPL");
static LIST_HEAD(rfkill_list); /* list of registered rf switches */
static DEFINE_MUTEX(rfkill_mutex);
static enum rfkill_state rfkill_states[RFKILL_TYPE_MAX];
static int rfkill_toggle_radio(struct rfkill *rfkill,
enum rfkill_state state)
{
int retval;
retval = mutex_lock_interruptible(&rfkill->mutex);
if (retval)
return retval;
if (state != rfkill->state) {
retval = rfkill->toggle_radio(rfkill->data, state);
if (!retval)
rfkill->state = state;
}
mutex_unlock(&rfkill->mutex);
return retval;
}
/**
* rfkill_switch_all - Toggle state of all switches of given type
* @type: type of interfaces to be affeceted
* @state: the new state
*
* This function toggles state of all switches of given type unless
* a specific switch is claimed by userspace in which case it is
* left alone.
*/
void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
{
struct rfkill *rfkill;
mutex_lock(&rfkill_mutex);
rfkill_states[type] = state;
list_for_each_entry(rfkill, &rfkill_list, node) {
if (!rfkill->user_claim)
rfkill_toggle_radio(rfkill, state);
}
mutex_unlock(&rfkill_mutex);
}
EXPORT_SYMBOL(rfkill_switch_all);
static ssize_t rfkill_name_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct rfkill *rfkill = to_rfkill(dev);
return sprintf(buf, "%s\n", rfkill->name);
}
static ssize_t rfkill_type_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct rfkill *rfkill = to_rfkill(dev);
const char *type;
switch (rfkill->type) {
case RFKILL_TYPE_WLAN:
type = "wlan";
break;
case RFKILL_TYPE_BLUETOOTH:
type = "bluetooth";
break;
case RFKILL_TYPE_IRDA:
type = "irda";
break;
default:
BUG();
}
return sprintf(buf, "%s\n", type);
}
static ssize_t rfkill_state_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct rfkill *rfkill = to_rfkill(dev);
return sprintf(buf, "%d\n", rfkill->state);
}
static ssize_t rfkill_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rfkill *rfkill = to_rfkill(dev);
unsigned int state = simple_strtoul(buf, NULL, 0);
int error;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
error = rfkill_toggle_radio(rfkill,
state ? RFKILL_STATE_ON : RFKILL_STATE_OFF);
if (error)
return error;
return count;
}
static ssize_t rfkill_claim_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct rfkill *rfkill = to_rfkill(dev);
return sprintf(buf, "%d", rfkill->user_claim);
}
static ssize_t rfkill_claim_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rfkill *rfkill = to_rfkill(dev);
bool claim = !!simple_strtoul(buf, NULL, 0);
int error;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
/*
* Take the global lock to make sure the kernel is not in
* the middle of rfkill_switch_all
*/
error = mutex_lock_interruptible(&rfkill_mutex);
if (error)
return error;
if (rfkill->user_claim != claim) {
if (!claim)
rfkill_toggle_radio(rfkill,
rfkill_states[rfkill->type]);
rfkill->user_claim = claim;
}
mutex_unlock(&rfkill_mutex);
return count;
}
static struct device_attribute rfkill_dev_attrs[] = {
__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
__ATTR(state, S_IRUGO, rfkill_state_show, rfkill_state_store),
__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
__ATTR_NULL
};
static void rfkill_release(struct device *dev)
{
struct rfkill *rfkill = to_rfkill(dev);
kfree(rfkill);
module_put(THIS_MODULE);
}
#ifdef CONFIG_PM
static int rfkill_suspend(struct device *dev, pm_message_t state)
{
struct rfkill *rfkill = to_rfkill(dev);
if (dev->power.power_state.event != state.event) {
if (state.event == PM_EVENT_SUSPEND) {
mutex_lock(&rfkill->mutex);
if (rfkill->state == RFKILL_STATE_ON)
rfkill->toggle_radio(rfkill->data,
RFKILL_STATE_OFF);
mutex_unlock(&rfkill->mutex);
}
dev->power.power_state = state;
}
return 0;
}
static int rfkill_resume(struct device *dev)
{
struct rfkill *rfkill = to_rfkill(dev);
if (dev->power.power_state.event != PM_EVENT_ON) {
mutex_lock(&rfkill->mutex);
if (rfkill->state == RFKILL_STATE_ON)
rfkill->toggle_radio(rfkill->data, RFKILL_STATE_ON);
mutex_unlock(&rfkill->mutex);
}
dev->power.power_state = PMSG_ON;
return 0;
}
#else
#define rfkill_suspend NULL
#define rfkill_resume NULL
#endif
static struct class rfkill_class = {
.name = "rfkill",
.dev_release = rfkill_release,
.dev_attrs = rfkill_dev_attrs,
.suspend = rfkill_suspend,
.resume = rfkill_resume,
};
static int rfkill_add_switch(struct rfkill *rfkill)
{
int retval;
retval = mutex_lock_interruptible(&rfkill_mutex);
if (retval)
return retval;
retval = rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type]);
if (retval)
goto out;
list_add_tail(&rfkill->node, &rfkill_list);
out:
mutex_unlock(&rfkill_mutex);
return retval;
}
static void rfkill_remove_switch(struct rfkill *rfkill)
{
mutex_lock(&rfkill_mutex);
list_del_init(&rfkill->node);
rfkill_toggle_radio(rfkill, RFKILL_STATE_OFF);
mutex_unlock(&rfkill_mutex);
}
/**
* rfkill_allocate - allocate memory for rfkill structure.
* @parent: device that has rf switch on it
* @type: type of the switch (wlan, bluetooth, irda)
*
* This function should be called by the network driver when it needs
* rfkill structure. Once the structure is allocated the driver shoud
* finish its initialization by setting name, private data, enable_radio
* and disable_radio methods and then register it with rfkill_register().
* NOTE: If registration fails the structure shoudl be freed by calling
* rfkill_free() otherwise rfkill_unregister() should be used.
*/
struct rfkill *rfkill_allocate(struct device *parent, enum rfkill_type type)
{
struct rfkill *rfkill;
struct device *dev;
rfkill = kzalloc(sizeof(struct rfkill), GFP_KERNEL);
if (rfkill)
return NULL;
mutex_init(&rfkill->mutex);
INIT_LIST_HEAD(&rfkill->node);
rfkill->type = type;
dev = &rfkill->dev;
dev->class = &rfkill_class;
dev->parent = parent;
device_initialize(dev);
__module_get(THIS_MODULE);
return rfkill;
}
EXPORT_SYMBOL(rfkill_allocate);
/**
* rfkill_free - Mark rfkill structure for deletion
* @rfkill: rfkill structure to be destroyed
*
* Decrements reference count of rfkill structure so it is destoryed.
* Note that rfkill_free() should _not_ be called after rfkill_unregister().
*/
void rfkill_free(struct rfkill *rfkill)
{
if (rfkill)
put_device(&rfkill->dev);
}
EXPORT_SYMBOL(rfkill_free);
/**
* rfkill_register - Register a rfkill structure.
* @rfkill: rfkill structure to be registered
*
* This function should be called by the network driver when the rfkill
* structure needs to be registered. Immediately from registration the
* switch driver should be able to service calls to toggle_radio.
*/
int rfkill_register(struct rfkill *rfkill)
{
static atomic_t rfkill_no = ATOMIC_INIT(0);
struct device *dev = &rfkill->dev;
int error;
if (!rfkill->toggle_radio)
return -EINVAL;
error = rfkill_add_switch(rfkill);
if (error)
return error;
snprintf(dev->bus_id, sizeof(dev->bus_id),
"rfkill%ld", (long)atomic_inc_return(&rfkill_no) - 1);
error = device_add(dev);
if (error) {
rfkill_remove_switch(rfkill);
return error;
}
return 0;
}
EXPORT_SYMBOL(rfkill_register);
/**
* rfkill_unregister - Uegister a rfkill structure.
* @rfkill: rfkill structure to be unregistered
*
* This function should be called by the network driver during device
* teardown to destroy rfkill structure. Note that rfkill_free() should
* _not_ be called after rfkill_unregister().
*/
void rfkill_unregister(struct rfkill *rfkill)
{
device_del(&rfkill->dev);
rfkill_remove_switch(rfkill);
put_device(&rfkill->dev);
}
EXPORT_SYMBOL(rfkill_unregister);
/*
* Rfkill module initialization/deinitialization.
*/
static int __init rfkill_init(void)
{
int error;
int i;
for (i = 0; i < ARRAY_SIZE(rfkill_states); i++)
rfkill_states[i] = RFKILL_STATE_ON;
error = class_register(&rfkill_class);
if (error) {
printk(KERN_ERR "rfkill: unable to register rfkill class\n");
return error;
}
return 0;
}
static void __exit rfkill_exit(void)
{
class_unregister(&rfkill_class);
}
module_init(rfkill_init);
module_exit(rfkill_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment