Commit 9fbd8b30 authored by Claudiu Beznea's avatar Claudiu Beznea Committed by Herbert Xu

hwrng: atmel - move set of TRNG_HALFR in atmel_trng_init()

Move set of TRNG_HALFR in atmel_trng_init() as this function is
also called on resume path. In case of SAMA7G5 where backup and
self-refresh PM mode is available most of the SoC parts are
powered of (including TRNG) when entering suspend. In that case
on resuming path TRNG_HALFR should also be re-configured.
Signed-off-by: default avatarClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent f14b0208
......@@ -36,6 +36,7 @@ struct atmel_trng {
struct clk *clk;
void __iomem *base;
struct hwrng rng;
bool has_half_rate;
};
static bool atmel_trng_wait_ready(struct atmel_trng *trng, bool wait)
......@@ -74,14 +75,32 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
return ret;
}
static void atmel_trng_init(struct atmel_trng *trng)
static int atmel_trng_init(struct atmel_trng *trng)
{
unsigned long rate;
int ret;
ret = clk_prepare_enable(trng->clk);
if (ret)
return ret;
if (trng->has_half_rate) {
rate = clk_get_rate(trng->clk);
/* if peripheral clk is above 100MHz, set HALFR */
if (rate > 100000000)
writel(TRNG_HALFR, trng->base + TRNG_MR);
}
writel(TRNG_KEY | 1, trng->base + TRNG_CR);
return 0;
}
static void atmel_trng_cleanup(struct atmel_trng *trng)
{
writel(TRNG_KEY, trng->base + TRNG_CR);
clk_disable_unprepare(trng->clk);
}
static int atmel_trng_probe(struct platform_device *pdev)
......@@ -105,22 +124,14 @@ static int atmel_trng_probe(struct platform_device *pdev)
if (!data)
return -ENODEV;
if (data->has_half_rate) {
unsigned long rate = clk_get_rate(trng->clk);
/* if peripheral clk is above 100MHz, set HALFR */
if (rate > 100000000)
writel(TRNG_HALFR, trng->base + TRNG_MR);
}
trng->has_half_rate = data->has_half_rate;
trng->rng.name = pdev->name;
trng->rng.read = atmel_trng_read;
ret = clk_prepare_enable(trng->clk);
ret = atmel_trng_init(trng);
if (ret)
return ret;
atmel_trng_init(trng);
trng->rng.name = pdev->name;
trng->rng.read = atmel_trng_read;
ret = devm_hwrng_register(&pdev->dev, &trng->rng);
if (ret)
goto err_register;
......@@ -130,7 +141,6 @@ static int atmel_trng_probe(struct platform_device *pdev)
return 0;
err_register:
clk_disable_unprepare(trng->clk);
atmel_trng_cleanup(trng);
return ret;
}
......@@ -141,7 +151,6 @@ static int atmel_trng_remove(struct platform_device *pdev)
atmel_trng_cleanup(trng);
clk_disable_unprepare(trng->clk);
return 0;
}
......@@ -152,7 +161,6 @@ static int atmel_trng_suspend(struct device *dev)
struct atmel_trng *trng = dev_get_drvdata(dev);
atmel_trng_cleanup(trng);
clk_disable_unprepare(trng->clk);
return 0;
}
......@@ -160,15 +168,8 @@ static int atmel_trng_suspend(struct device *dev)
static int atmel_trng_resume(struct device *dev)
{
struct atmel_trng *trng = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(trng->clk);
if (ret)
return ret;
atmel_trng_init(trng);
return 0;
return atmel_trng_init(trng);
}
static const struct dev_pm_ops atmel_trng_pm_ops = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment