Commit 9fe4eee9 authored by Dave Stevenson's avatar Dave Stevenson Committed by Mauro Carvalho Chehab

media: i2c: imx290: Convert V4L2_CID_VBLANK to read/write

The driver exposed V4L2_CID_VBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert to a read/write control so that the frame rate can be
controlled.
V4L2_CID_VBLANK also sets the limits for the exposure control,
therefore exposure ranges have to be updated when vblank changes
(either via s_ctrl, or via changing mode).
Signed-off-by: default avatarDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarAlexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent 08a0061d
......@@ -49,6 +49,7 @@
#define IMX290_BLKLEVEL IMX290_REG_16BIT(0x300a)
#define IMX290_GAIN IMX290_REG_8BIT(0x3014)
#define IMX290_VMAX IMX290_REG_24BIT(0x3018)
#define IMX290_VMAX_MAX 0x3ffff
#define IMX290_HMAX IMX290_REG_16BIT(0x301c)
#define IMX290_HMAX_MAX 0xffff
#define IMX290_SHS1 IMX290_REG_24BIT(0x3020)
......@@ -109,6 +110,9 @@
#define IMX290_PGCTRL_THRU BIT(1)
#define IMX290_PGCTRL_MODE(n) ((n) << 4)
/* Number of lines by which exposure must be less than VMAX */
#define IMX290_EXPOSURE_OFFSET 2
#define IMX290_VMAX_DEFAULT 1125
#define IMX290_PIXEL_RATE 148500000
......@@ -225,6 +229,7 @@ struct imx290 {
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *exposure;
};
static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
......@@ -238,7 +243,6 @@ static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
static const struct imx290_regval imx290_global_init_settings[] = {
{ IMX290_CTRL_07, IMX290_WINMODE_1080P },
{ IMX290_VMAX, IMX290_VMAX_DEFAULT },
{ IMX290_EXTCK_FREQ, 0x2520 },
{ IMX290_WINWV_OB, 12 },
{ IMX290_WINPH, 0 },
......@@ -664,6 +668,16 @@ static int imx290_setup_format(struct imx290 *imx290,
/* ----------------------------------------------------------------------------
* Controls
*/
static void imx290_exposure_update(struct imx290 *imx290,
const struct imx290_mode *mode)
{
unsigned int exposure_max;
exposure_max = imx290->vblank->val + mode->height -
IMX290_EXPOSURE_OFFSET;
__v4l2_ctrl_modify_range(imx290->exposure, 1, exposure_max, 1,
exposure_max);
}
static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
{
......@@ -671,7 +685,7 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
struct imx290, ctrls);
const struct v4l2_mbus_framefmt *format;
struct v4l2_subdev_state *state;
int ret = 0;
int ret = 0, vmax;
/*
* Return immediately for controls that don't need to be applied to the
......@@ -680,6 +694,11 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
return 0;
if (ctrl->id == V4L2_CID_VBLANK) {
/* Changing vblank changes the allowed range for exposure. */
imx290_exposure_update(imx290, imx290->current_mode);
}
/* V4L2 controls values will be applied only when power is already up */
if (!pm_runtime_get_if_in_use(imx290->dev))
return 0;
......@@ -692,9 +711,23 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
ret = imx290_write(imx290, IMX290_GAIN, ctrl->val, NULL);
break;
case V4L2_CID_VBLANK:
ret = imx290_write(imx290, IMX290_VMAX,
ctrl->val + imx290->current_mode->height,
NULL);
/*
* Due to the way that exposure is programmed in this sensor in
* relation to VMAX, we have to reprogramme it whenever VMAX is
* changed.
* Update ctrl so that the V4L2_CID_EXPOSURE case can refer to
* it.
*/
ctrl = imx290->exposure;
fallthrough;
case V4L2_CID_EXPOSURE:
vmax = imx290->vblank->val + imx290->current_mode->height;
ret = imx290_write(imx290, IMX290_SHS1,
IMX290_VMAX_DEFAULT - ctrl->val - 1, NULL);
vmax - ctrl->val - 1, NULL);
break;
case V4L2_CID_TEST_PATTERN:
......@@ -751,13 +784,15 @@ static void imx290_ctrl_update(struct imx290 *imx290,
{
unsigned int hblank_min = mode->hmax_min - mode->width;
unsigned int hblank_max = IMX290_HMAX_MAX - mode->width;
unsigned int vblank = IMX290_VMAX_DEFAULT - mode->height;
unsigned int vblank_min = IMX290_VMAX_DEFAULT - mode->height;
unsigned int vblank_max = IMX290_VMAX_MAX - mode->height;
__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
__v4l2_ctrl_modify_range(imx290->hblank, hblank_min, hblank_max, 1,
hblank_min);
__v4l2_ctrl_modify_range(imx290->vblank, vblank, vblank, 1, vblank);
__v4l2_ctrl_modify_range(imx290->vblank, vblank_min, vblank_max, 1,
vblank_min);
}
static int imx290_ctrl_init(struct imx290 *imx290)
......@@ -787,9 +822,13 @@ static int imx290_ctrl_init(struct imx290 *imx290)
v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0);
v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
V4L2_CID_EXPOSURE, 1, IMX290_VMAX_DEFAULT - 2, 1,
IMX290_VMAX_DEFAULT - 2);
/*
* Correct range will be determined through imx290_ctrl_update setting
* V4L2_CID_VBLANK.
*/
imx290->exposure = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
V4L2_CID_EXPOSURE, 1, 65535, 1,
65535);
/*
* Set the link frequency, pixel rate, horizontal blanking and vertical
......@@ -821,8 +860,6 @@ static int imx290_ctrl_init(struct imx290 *imx290)
imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
V4L2_CID_VBLANK, 1, 1, 1, 1);
if (imx290->vblank)
imx290->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
v4l2_ctrl_new_fwnode_properties(&imx290->ctrls, &imx290_ctrl_ops,
&props);
......@@ -1008,6 +1045,7 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
imx290->current_mode = mode;
imx290_ctrl_update(imx290, &fmt->format, mode);
imx290_exposure_update(imx290, mode);
}
*format = fmt->format;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment