Commit 9fe8ecca authored by Fernando D S Lima's avatar Fernando D S Lima Committed by Jiri Kosina

HID: sensor-hub: Fixup for Lenovo ThinkPad Helix 2 sensor hub report

There is an error in the report descriptor of the Thinkpad Helix 2 where
logical minimum value (557376) is greater than logical maximum (491200)
for all of the magnetic flux axis data fields. This error results in a
report descriptor parsing failure that causes the sensors attached to the
hub not to be detected.

dmesg excerpt:
[   19.866905] drivers/hid/hid-core.c: logical range invalid 0x88140 0x77ec0
[   19.866914] hid-sensor-hub 0018:2047:0855.0007: item 0 1 0 8 parsing failed
[   19.866926] hid-sensor-hub 0018:2047:0855.0007: parse failed
[   19.866933] hid-sensor-hub: probe of 0018:2047:0855.0007 failed with error -22

Add a report fixup to change magnetic flux logical minimums to -557376
for the parsing to succeed and the sensors to get detected.
After applying the fix the sensors get detected, with corresponding drivers
(hid-accel-3d,hid-gyro-3d,etc) loaded, and its possible to read their values.
Signed-off-by: default avatarFernando D S Lima <fernandodsl@gmail.com>
Reviewed-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 851328fe
...@@ -593,6 +593,20 @@ static __u8 *sensor_hub_report_fixup(struct hid_device *hdev, __u8 *rdesc, ...@@ -593,6 +593,20 @@ static __u8 *sensor_hub_report_fixup(struct hid_device *hdev, __u8 *rdesc,
} }
} }
/* Checks if the report descriptor of Thinkpad Helix 2 has a logical
* minimum for magnetic flux axis greater than the maximum */
if (hdev->product == USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA &&
*rsize == 2558 && rdesc[913] == 0x17 && rdesc[914] == 0x40 &&
rdesc[915] == 0x81 && rdesc[916] == 0x08 &&
rdesc[917] == 0x00 && rdesc[918] == 0x27 &&
rdesc[921] == 0x07 && rdesc[922] == 0x00) {
/* Sets negative logical minimum for mag x, y and z */
rdesc[914] = rdesc[935] = rdesc[956] = 0xc0;
rdesc[915] = rdesc[936] = rdesc[957] = 0x7e;
rdesc[916] = rdesc[937] = rdesc[958] = 0xf7;
rdesc[917] = rdesc[938] = rdesc[959] = 0xff;
}
return rdesc; return rdesc;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment