ARM: dts: qcom-*: replace deprecated perst-gpio with perst-gpios

Replace deprecated perst-gpio properties with up-to-date perst-gpios
in the arm32 Qualcomm Snapdragon device trees.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220506152107.1527552-8-dmitry.baryshkov@linaro.org

arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts

@@ -215,7 +215,7 @@ pci@1b500000 {
 			vdda_refclk-supply = <&v3p3_fixed>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 		};
 
 		amba {

arch/arm/boot/dts/qcom-apq8064-ifc6410.dts

@@ -287,7 +287,7 @@ pci@1b500000 {
 			vdda_refclk-supply = <&ext_3p3v>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 		};
 
 		qcom,ssbi@500000 {

arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

@@ -100,7 +100,7 @@ flash@0 {
 
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 0x1>;
 		};
 
 		qpic-nand@79b0000 {

arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

@@ -10,7 +10,7 @@ / {
 	soc {
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 0x1>;
 		};
 
 		spi@78b6000 {

arch/arm/boot/dts/qcom-ipq8064.dtsi

@@ -979,7 +979,7 @@ pcie0: pci@1b500000 {
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie1: pci@1b700000 {
@@ -1030,7 +1030,7 @@ pcie1: pci@1b700000 {
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie2: pci@1b900000 {
@@ -1081,7 +1081,7 @@ pcie2: pci@1b900000 {
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 		};
 
 		nss_common: syscon@03000000 {