net: dsa: felix: Add support for MRP

Implement functions 'port_mrp_add', 'port_mrp_del',
'port_mrp_add_ring_role' and 'port_mrp_del_ring_role' to call the mrp
functions from ocelot.

Also all MRP frames that arrive to CPU on queue number OCELOT_MRP_CPUQ
will be forward by the SW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/ocelot/felix.c

@@ -1582,6 +1582,40 @@ static int felix_sb_occ_tc_port_bind_get(struct dsa_switch *ds, int port,
 					      pool_type, p_cur, p_max);
 }
 
+static int felix_mrp_add(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_mrp *mrp)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_mrp_add(ocelot, port, mrp);
+}
+
+static int felix_mrp_del(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_mrp *mrp)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_mrp_add(ocelot, port, mrp);
+}
+
+static int
+felix_mrp_add_ring_role(struct dsa_switch *ds, int port,
+			const struct switchdev_obj_ring_role_mrp *mrp)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_mrp_add_ring_role(ocelot, port, mrp);
+}
+
+static int
+felix_mrp_del_ring_role(struct dsa_switch *ds, int port,
+			const struct switchdev_obj_ring_role_mrp *mrp)
+{
+	struct ocelot *ocelot = ds->priv;
+
+	return ocelot_mrp_del_ring_role(ocelot, port, mrp);
+}
+
 const struct dsa_switch_ops felix_switch_ops = {
 	.get_tag_protocol		= felix_get_tag_protocol,
 	.change_tag_protocol		= felix_change_tag_protocol,
@@ -1636,6 +1670,10 @@ const struct dsa_switch_ops felix_switch_ops = {
 	.devlink_sb_occ_max_clear	= felix_sb_occ_max_clear,
 	.devlink_sb_occ_port_pool_get	= felix_sb_occ_port_pool_get,
 	.devlink_sb_occ_tc_port_bind_get= felix_sb_occ_tc_port_bind_get,
+	.port_mrp_add			= felix_mrp_add,
+	.port_mrp_del			= felix_mrp_del,
+	.port_mrp_add_ring_role		= felix_mrp_add_ring_role,
+	.port_mrp_del_ring_role		= felix_mrp_del_ring_role,
 };
 
 struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)

net/dsa/tag_ocelot.c

@@ -83,6 +83,7 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 	struct dsa_port *dp;
 	u8 *extraction;
 	u16 vlan_tpid;
+	u64 cpuq;
 
 	/* Revert skb->data by the amount consumed by the DSA master,
 	 * so it points to the beginning of the frame.
@@ -112,6 +113,7 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 	ocelot_xfh_get_qos_class(extraction, &qos_class);
 	ocelot_xfh_get_tag_type(extraction, &tag_type);
 	ocelot_xfh_get_vlan_tci(extraction, &vlan_tci);
+	ocelot_xfh_get_cpuq(extraction, &cpuq);
 
 	skb->dev = dsa_master_find_slave(netdev, 0, src_port);
 	if (!skb->dev)
@@ -126,6 +128,12 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
 	skb->offload_fwd_mark = 1;
 	skb->priority = qos_class;
 
+#if IS_ENABLED(CONFIG_BRIDGE_MRP)
+	if (eth_hdr(skb)->h_proto == cpu_to_be16(ETH_P_MRP) &&
+	    cpuq & BIT(OCELOT_MRP_CPUQ))
+		skb->offload_fwd_mark = 0;
+#endif
+
 	/* Ocelot switches copy frames unmodified to the CPU. However, it is
 	 * possible for the user to request a VLAN modification through
 	 * VCAP_IS1_ACT_VID_REPLACE_ENA. In this case, what will happen is that