Commit a05ef00c authored by Uladzislau Rezki (Sony)'s avatar Uladzislau Rezki (Sony) Committed by Linus Torvalds

selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE

Add the test script for the kernel test driver to analyse vmalloc
allocator for benchmarking and stressing purposes.  It is just a kernel
module loader.  You can specify and pass different parameters in order
to investigate allocations behaviour.  See "usage" output for more
details.

Also add basic vmalloc smoke test to the "run_vmtests" suite.

Link: http://lkml.kernel.org/r/20190103142108.20744-4-urezki@gmail.comSigned-off-by: default avatarUladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: default avatarShuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 3f21a6b7
......@@ -211,4 +211,20 @@ else
echo "[PASS]"
fi
echo "------------------------------------"
echo "running vmalloc stability smoke test"
echo "------------------------------------"
./test_vmalloc.sh smoke
ret_val=$?
if [ $ret_val -eq 0 ]; then
echo "[PASS]"
elif [ $ret_val -eq $ksft_skip ]; then
echo "[SKIP]"
exitcode=$ksft_skip
else
echo "[FAIL]"
exitcode=1
fi
exit $exitcode
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Copyright (C) 2018 Uladzislau Rezki (Sony) <urezki@gmail.com>
#
# This is a test script for the kernel test driver to analyse vmalloc
# allocator. Therefore it is just a kernel module loader. You can specify
# and pass different parameters in order to:
# a) analyse performance of vmalloc allocations;
# b) stressing and stability check of vmalloc subsystem.
TEST_NAME="vmalloc"
DRIVER="test_${TEST_NAME}"
# 1 if fails
exitcode=1
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
#
# Static templates for performance, stressing and smoke tests.
# Also it is possible to pass any supported parameters manualy.
#
PERF_PARAM="single_cpu_test=1 sequential_test_order=1 test_repeat_count=3"
SMOKE_PARAM="single_cpu_test=1 test_loop_count=10000 test_repeat_count=10"
STRESS_PARAM="test_repeat_count=20"
check_test_requirements()
{
uid=$(id -u)
if [ $uid -ne 0 ]; then
echo "$0: Must be run as root"
exit $ksft_skip
fi
if ! which modprobe > /dev/null 2>&1; then
echo "$0: You need modprobe installed"
exit $ksft_skip
fi
if ! modinfo $DRIVER > /dev/null 2>&1; then
echo "$0: You must have the following enabled in your kernel:"
echo "CONFIG_TEST_VMALLOC=m"
exit $ksft_skip
fi
}
run_perfformance_check()
{
echo "Run performance tests to evaluate how fast vmalloc allocation is."
echo "It runs all test cases on one single CPU with sequential order."
modprobe $DRIVER $PERF_PARAM > /dev/null 2>&1
echo "Done."
echo "Ccheck the kernel message buffer to see the summary."
}
run_stability_check()
{
echo "Run stability tests. In order to stress vmalloc subsystem we run"
echo "all available test cases on all available CPUs simultaneously."
echo "It will take time, so be patient."
modprobe $DRIVER $STRESS_PARAM > /dev/null 2>&1
echo "Done."
echo "Check the kernel ring buffer to see the summary."
}
run_smoke_check()
{
echo "Run smoke test. Note, this test provides basic coverage."
echo "Please check $0 output how it can be used"
echo "for deep performance analysis as well as stress testing."
modprobe $DRIVER $SMOKE_PARAM > /dev/null 2>&1
echo "Done."
echo "Check the kernel ring buffer to see the summary."
}
usage()
{
echo -n "Usage: $0 [ performance ] | [ stress ] | | [ smoke ] | "
echo "manual parameters"
echo
echo "Valid tests and parameters:"
echo
modinfo $DRIVER
echo
echo "Example usage:"
echo
echo "# Shows help message"
echo "./${DRIVER}.sh"
echo
echo "# Runs 1 test(id_1), repeats it 5 times on all online CPUs"
echo "./${DRIVER}.sh run_test_mask=1 test_repeat_count=5"
echo
echo -n "# Runs 4 tests(id_1|id_2|id_4|id_16) on one CPU with "
echo "sequential order"
echo -n "./${DRIVER}.sh single_cpu_test=1 sequential_test_order=1 "
echo "run_test_mask=23"
echo
echo -n "# Runs all tests on all online CPUs, shuffled order, repeats "
echo "20 times"
echo "./${DRIVER}.sh test_repeat_count=20"
echo
echo "# Performance analysis"
echo "./${DRIVER}.sh performance"
echo
echo "# Stress testing"
echo "./${DRIVER}.sh stress"
echo
exit 0
}
function validate_passed_args()
{
VALID_ARGS=`modinfo $DRIVER | awk '/parm:/ {print $2}' | sed 's/:.*//'`
#
# Something has been passed, check it.
#
for passed_arg in $@; do
key=${passed_arg//=*/}
val="${passed_arg:$((${#key}+1))}"
valid=0
for valid_arg in $VALID_ARGS; do
if [[ $key = $valid_arg ]] && [[ $val -gt 0 ]]; then
valid=1
break
fi
done
if [[ $valid -ne 1 ]]; then
echo "Error: key or value is not correct: ${key} $val"
exit $exitcode
fi
done
}
function run_manual_check()
{
#
# Validate passed parameters. If there is wrong one,
# the script exists and does not execute further.
#
validate_passed_args $@
echo "Run the test with following parameters: $@"
modprobe $DRIVER $@ > /dev/null 2>&1
echo "Done."
echo "Check the kernel ring buffer to see the summary."
}
function run_test()
{
if [ $# -eq 0 ]; then
usage
else
if [[ "$1" = "performance" ]]; then
run_perfformance_check
elif [[ "$1" = "stress" ]]; then
run_stability_check
elif [[ "$1" = "smoke" ]]; then
run_smoke_check
else
run_manual_check $@
fi
fi
}
check_test_requirements
run_test $@
exit 0
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment