Merge tag 'amlogic-dt' of...

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: amlogic updates for v5.9
- power-domain and MMC updates

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: enable the SDHC controller
  ARM: dts: meson8b: ec100: enable the SDHC controller
  ARM: dts: meson: add the SDHC MMC controller
  ARM: dts: meson8b: add power domain controller
  ARM: dts: meson8m2: add resets for the power domain controller
  ARM: dts: meson8: add power domain controller

Link: https://lore.kernel.org/r/7hd04uf2o8.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/meson.dtsi

@@ -140,6 +140,13 @@ spifc: spi@8c80 {
 				status = "disabled";
 			};
 
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			gpio_intc: interrupt-controller@9880 {
 				compatible = "amlogic,meson-gpio-intc";
 				reg = <0x9880 0x10>;

arch/arm/boot/dts/meson8.dtsi

@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include "meson.dtsi"
@@ -385,6 +386,15 @@ mux {
 			};
 		};
 
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -454,6 +464,8 @@ temperature_calib: calib@1f4 {
 &ethmac {
 	clocks = <&clkc CLKID_ETH>;
 	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
 };
 
 &gpio_intc {
@@ -469,6 +481,16 @@ clkc: clock-controller {
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
 };
 
 &hwrng {
@@ -547,6 +569,16 @@ &saradc {
 	nvmem-cell-names = "temperature_calib";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
 &sdio {
 	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;

arch/arm/boot/dts/meson8b-ec100.dts

@@ -27,6 +27,11 @@ memory {
 		reg = <0x40000000 0x40000000>;
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -299,6 +304,26 @@ &saradc {
 	vref-supply = <&vcc_1v8>;
 };
 
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 

arch/arm/boot/dts/meson8b-odroidc1.dts

@@ -15,6 +15,7 @@ / {
 	aliases {
 		serial0 = &uart_AO;
 		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
 	};
 
 	chosen {
@@ -26,6 +27,11 @@ memory {
 		reg = <0x40000000 0x40000000>;
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		blue {
@@ -310,6 +316,26 @@ &saradc {
 	vref-supply = <&vcc_1v8>;
 };
 
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
 &sdio {
 	status = "okay";
 

arch/arm/boot/dts/meson8b.dtsi

@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
 #include "meson.dtsi"
@@ -362,6 +363,16 @@ mux {
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		pwm_c1_pins: pwm-c1 {
 			mux {
 				groups = "pwm_c1";
@@ -433,6 +444,8 @@ &ethmac {
 
 	resets = <&reset RESET_ETHERNET>;
 	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
 };
 
 &gpio_intc {
@@ -449,6 +462,30 @@ clkc: clock-controller {
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
 };
 
 &hwrng {
@@ -527,6 +564,16 @@ &saradc {
 	nvmem-cell-names = "temperature_calib";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
 &sdio {
 	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;

arch/arm/boot/dts/meson8m2.dtsi

@@ -61,10 +61,33 @@ mux {
 	};
 };
 
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
 &saradc {
 	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
 &usb0_phy {
 	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
 };