MIPS: lantiq: Fix IPI interrupt handling

commit 2b4dba55 upstream.

This makes SMP on the vrx200 work again, by removing all the MIPS CPU
interrupt specific code and making it fully use the generic MIPS CPU
interrupt controller.

The mti,cpu-interrupt-controller from irq-mips-cpu.c now handles the CPU
interrupts and also the IPI interrupts which are used to communication
between the CPUs in a SMP system. The generic interrupt code was
already used before but the interrupt vectors were overwritten again
when we called set_vi_handler() in the lantiq interrupt driver and we
also provided our own plat_irq_dispatch() function which overwrote the
weak generic implementation. Now the code uses the generic handler for
the MIPS CPU interrupts including the IPI interrupts and registers a
handler for the CPU interrupts which are handled by the lantiq ICU with
irq_set_chained_handler() which was already called before.

Calling the set_c0_status() function is also not needed any more because
the generic MIPS CPU interrupt already activates the needed bits.

Fixes: 1eed4004 ("MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support")
Cc: stable@kernel.org # v4.12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: jhogan@kernel.org
Cc: ralf@linux-mips.org
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/mips/lantiq/irq.c

@@ -224,9 +224,11 @@ static struct irq_chip ltq_eiu_type = {
 	.irq_set_type = ltq_eiu_settype,
 };
 
-static void ltq_hw_irqdispatch(int module)
+static void ltq_hw_irq_handler(struct irq_desc *desc)
 {
+	int module = irq_desc_get_irq(desc) - 2;
 	u32 irq;
+	int hwirq;
 
 	irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR);
 	if (irq == 0)
@@ -237,7 +239,8 @@ static void ltq_hw_irqdispatch(int module)
 	 * other bits might be bogus
 	 */
 	irq = __fls(irq);
-	do_IRQ((int)irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module));
+	hwirq = irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module);
+	generic_handle_irq(irq_linear_revmap(ltq_domain, hwirq));
 
 	/* if this is a EBU irq, we need to ack it or get a deadlock */
 	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
@@ -245,49 +248,6 @@ static void ltq_hw_irqdispatch(int module)
 			LTQ_EBU_PCC_ISTAT);
 }
 
-#define DEFINE_HWx_IRQDISPATCH(x)					\
-	static void ltq_hw ## x ## _irqdispatch(void)			\
-	{								\
-		ltq_hw_irqdispatch(x);					\
-	}
-DEFINE_HWx_IRQDISPATCH(0)
-DEFINE_HWx_IRQDISPATCH(1)
-DEFINE_HWx_IRQDISPATCH(2)
-DEFINE_HWx_IRQDISPATCH(3)
-DEFINE_HWx_IRQDISPATCH(4)
-
-#if MIPS_CPU_TIMER_IRQ == 7
-static void ltq_hw5_irqdispatch(void)
-{
-	do_IRQ(MIPS_CPU_TIMER_IRQ);
-}
-#else
-DEFINE_HWx_IRQDISPATCH(5)
-#endif
-
-static void ltq_hw_irq_handler(struct irq_desc *desc)
-{
-	ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-	int irq;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
 static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	struct irq_chip *chip = &ltq_irq_type;
@@ -343,28 +303,10 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	for (i = 0; i < MAX_IM; i++)
 		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
 
-	if (cpu_has_vint) {
-		pr_info("Setting up vectored interrupts\n");
-		set_vi_handler(2, ltq_hw0_irqdispatch);
-		set_vi_handler(3, ltq_hw1_irqdispatch);
-		set_vi_handler(4, ltq_hw2_irqdispatch);
-		set_vi_handler(5, ltq_hw3_irqdispatch);
-		set_vi_handler(6, ltq_hw4_irqdispatch);
-		set_vi_handler(7, ltq_hw5_irqdispatch);
-	}
-
 	ltq_domain = irq_domain_add_linear(node,
 		(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
 		&irq_domain_ops, 0);
 
-#ifndef CONFIG_MIPS_MT_SMP
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
-		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#else
-	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
-		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#endif
-
 	/* tell oprofile which irq to use */
 	ltq_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);