Commit a0a1f61a authored by Justin P. Mattock's avatar Justin P. Mattock Committed by Greg Kroah-Hartman

staging "vt6656" Fix typos in comments, and in a printk message.

Signed-off-by: default avatarJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7664ec86
......@@ -191,7 +191,7 @@
//
// Cipher Suite Selectors defiened in 802.11i
// Cipher Suite Selectors defined in 802.11i
//
#define WLAN_11i_CSS_USE_GROUP 0
#define WLAN_11i_CSS_WEP40 1
......@@ -720,7 +720,7 @@ typedef struct tagWLAN_FR_AUTHEN {
} WLAN_FR_AUTHEN, *PWLAN_FR_AUTHEN;
// Deauthenication
// Deauthentication
typedef struct tagWLAN_FR_DEAUTHEN {
unsigned int uType;
......
......@@ -27,7 +27,7 @@
*
* Functions:
* BBuGetFrameTime - Calculate data frame transmitting time
* BBvCaculateParameter - Caculate PhyLength, PhyService and Phy Signal parameter for baseband Tx
* BBvCaculateParameter - Calculate PhyLength, PhyService and Phy Signal parameter for baseband Tx
* BBbVT3184Init - VIA VT3184 baseband chip init code
* BBvLoopbackOn - Turn on BaseBand Loopback mode
* BBvLoopbackOff - Turn off BaseBand Loopback mode
......@@ -741,7 +741,7 @@ BBuGetFrameTime (
}
/*
* Description: Caculate Length, Service, and Signal fields of Phy for Tx
* Description: Calculate Length, Service, and Signal fields of Phy for Tx
*
* Parameters:
* In:
......
......@@ -226,7 +226,7 @@ PKnownBSS BSSpSearchBSSList(void *hDeviceContext,
if (pSelect == NULL) {
pSelect = pCurrBSS;
} else {
// compare RSSI, select signal strong one
// compare RSSI, select the strongest signal
if (pCurrBSS->uRSSI < pSelect->uRSSI) {
pSelect = pCurrBSS;
}
......@@ -274,9 +274,9 @@ void BSSvClearBSSList(void *hDeviceContext, BOOL bKeepCurrBSSID)
if (pMgmt->sBSSList[ii].bActive &&
!compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
pMgmt->abyCurrBSSID)) {
//mike mark: there are two same BSSID in list if that AP is in hidden ssid mode,one 's SSID is null,
// but other's is obvious, so if it acssociate with your STA exactly,you must keep two
// of them!!!!!!!!!
//mike mark: there are two BSSID's in list. If that AP is in hidden ssid mode, one SSID is null,
// but other's might not be obvious, so if it associate's with your STA,
// you must keep the two of them!!
// bKeepCurrBSSID = FALSE;
continue;
}
......@@ -489,7 +489,7 @@ BOOL BSSbInsertToBSSList(void *hDeviceContext,
}
if (pDevice->bUpdateBBVGA) {
// Moniter if RSSI is too strong.
// Monitor if RSSI is too strong.
pBSSList->byRSSIStatCnt = 0;
RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &pBSSList->ldBmMAX);
pBSSList->ldBmAverage[0] = pBSSList->ldBmMAX;
......@@ -621,7 +621,7 @@ BOOL BSSbUpdateToBSSList(void *hDeviceContext,
if (pRxPacket->uRSSI != 0) {
RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &ldBm);
// Moniter if RSSI is too strong.
// Monitor if RSSI is too strong.
pBSSList->byRSSIStatCnt++;
pBSSList->byRSSIStatCnt %= RSSI_STAT_COUNT;
pBSSList->ldBmAverage[pBSSList->byRSSIStatCnt] = ldBm;
......@@ -687,8 +687,8 @@ BOOL BSSbIsSTAInNodeDB(void *hDeviceContext,
/*+
*
* Routine Description:
* Find an empty node and allocated; if no empty found,
* instand used of most inactive one.
* Find an empty node and allocate it; if no empty node
* is found, then use the most inactive one.
*
* Return Value:
* None
......@@ -718,7 +718,7 @@ void BSSvCreateOneNode(void *hDeviceContext, unsigned int *puNodeIndex)
}
}
// if not found replace uInActiveCount is largest one.
// if not found replace uInActiveCount with the largest one.
if ( ii == (MAX_NODE_NUM + 1)) {
*puNodeIndex = SelectIndex;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Replace inactive node = %d\n", SelectIndex);
......
......@@ -28,9 +28,9 @@
* CARDbIsOFDMinBasicRate - Check if any OFDM rate is in BasicRateSet
* CARDvSetLoopbackMode - Set Loopback mode
* CARDbSoftwareReset - Sortware reset NIC
* CARDqGetTSFOffset - Caculate TSFOffset
* CARDqGetTSFOffset - Calculate TSFOffset
* CARDbGetCurrentTSF - Read Current NIC TSF counter
* CARDqGetNextTBTT - Caculate Next Beacon TSF counter
* CARDqGetNextTBTT - Calculate Next Beacon TSF counter
* CARDvSetFirstNextTBTT - Set NIC Beacon time
* CARDvUpdateNextTBTT - Sync. NIC Beacon time
* CARDbRadioPowerOff - Turn Off NIC Radio Power
......@@ -40,7 +40,7 @@
*
* Revision History:
* 06-10-2003 Bryan YC Fan: Re-write codes to support VT3253 spec.
* 08-26-2003 Kyle Hsu: Modify the defination type of dwIoBase.
* 08-26-2003 Kyle Hsu: Modify the definition type of dwIoBase.
* 09-01-2003 Bryan YC Fan: Add vUpdateIFS().
*
*/
......@@ -200,7 +200,7 @@ static WORD swGetOFDMControlRate(void *pDeviceHandler, WORD wRateIdx)
}
/*
* Description: Caculate TxRate and RsvTime fields for RSPINF in OFDM mode.
* Description: Calculate TxRate and RsvTime fields for RSPINF in OFDM mode.
*
* Parameters:
* In:
......@@ -640,7 +640,7 @@ BYTE CARDbyGetPktType(void *pDeviceHandler)
/*
* Description: Caculate TSF offset of two TSF input
* Description: Calculate TSF offset of two TSF input
* Get TSF Offset from RxBCN's TSF and local TSF
*
* Parameters:
......
......@@ -478,7 +478,7 @@ typedef struct __device_info {
unsigned int cbTD;
//
// Variables to track resources for the Interript In Pipe
// Variables to track resources for the Interrupt In Pipe
//
INT_BUFFER intBuf;
BOOL fKillEventPollingThread;
......
......@@ -748,7 +748,7 @@ RXbBulkInProcessData (
if ((*pbyRSSI != 0) &&
(pMgmt->pCurrBSS!=NULL)) {
RFvRSSITodBm(pDevice, *pbyRSSI, &ldBm);
// Moniter if RSSI is too strong.
// Monitor if RSSI is too strong.
pMgmt->pCurrBSS->byRSSIStatCnt++;
pMgmt->pCurrBSS->byRSSIStatCnt %= RSSI_STAT_COUNT;
pMgmt->pCurrBSS->ldBmAverage[pMgmt->pCurrBSS->byRSSIStatCnt] = ldBm;
......
......@@ -18,7 +18,7 @@
*
* File: hostap.c
*
* Purpose: handle hostap deamon ioctl input/out functions
* Purpose: handle hostap daemon ioctl input/out functions
*
* Author: Lyndon Chen
*
......@@ -48,7 +48,7 @@ static int msglevel =MSG_LEVEL_INFO;
/*
* Description:
* register net_device (AP) for hostap deamon
* register net_device (AP) for hostap daemon
*
* Parameters:
* In:
......@@ -176,7 +176,7 @@ int vt6656_hostap_set_hostapd(PSDevice pDevice, int val, int rtnl_locked)
/*
* Description:
* remove station function supported for hostap deamon
* remove station function supported for hostap daemon
*
* Parameters:
* In:
......@@ -204,7 +204,7 @@ static int hostap_remove_sta(PSDevice pDevice,
/*
* Description:
* add a station from hostap deamon
* add a station from hostap daemon
*
* Parameters:
* In:
......@@ -686,7 +686,7 @@ static int hostap_get_encryption(PSDevice pDevice,
/*
* Description:
* vt6656_hostap_ioctl main function supported for hostap deamon.
* vt6656_hostap_ioctl main function supported for hostap daemon.
*
* Parameters:
* In:
......
......@@ -149,7 +149,7 @@ void INTnsProcessData(PSDevice pDevice)
pMgmt->sNodeDBTable[0].bRxPSPoll =
FALSE;
} else if (pMgmt->byDTIMCount == 0) {
/* check if mutltcast tx bufferring */
/* check if multicast tx buffering */
pMgmt->byDTIMCount =
pMgmt->byDTIMPeriod-1;
pMgmt->sNodeDBTable[0].bRxPSPoll = TRUE;
......
......@@ -617,7 +617,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
result = -EFAULT;
break;
}
/* for some AP maybe good authenticate */
/* for some AP's maybe a good authentication */
if (wpa_Result.key_mgmt == 0x20)
pMgmt->Cisco_cckm = 1;
else
......@@ -641,7 +641,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
break;
default:
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not support..\n");
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not supported..\n");
}
return result;
......
......@@ -674,7 +674,7 @@ int iwctl_giwaplist(struct net_device *dev, struct iw_request_info *info,
jj++;
}
wrq->flags = 1; // Should be define'd
wrq->flags = 1; // Should be defined
wrq->length = jj;
memcpy(extra, sock, sizeof(struct sockaddr) * jj);
memcpy(extra + sizeof(struct sockaddr) * jj, qual, sizeof(struct iw_quality) * jj);
......
......@@ -403,7 +403,7 @@ BOOL KeybRemoveKey(
BOOL bReturnValue = FALSE;
if (is_broadcast_ether_addr(pbyBSSID)) {
// dealte all key
// delete all keys
if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
for (i=0;i<MAX_KEY_TABLE;i++) {
pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
......@@ -618,7 +618,7 @@ BOOL KeybGetTransmitKey(PSKeyManagement pTable, PBYTE pbyBSSID, DWORD dwKeyType,
/*
* Description: Check Pairewise Key
* Description: Check Pairwise Key
*
* Parameters:
* In:
......
......@@ -29,14 +29,14 @@
* vt6656_probe - module initial (insmod) driver entry
* device_remove1 - module remove entry
* device_open - allocate dma/descripter resource & initial mac/bbp function
* device_xmit - asynchrous data tx function
* device_xmit - asynchronous data tx function
* device_set_multi - set mac filter
* device_ioctl - ioctl entry
* device_close - shutdown mac/bbp & free dma/descripter resource
* device_close - shutdown mac/bbp & free dma/descriptor resource
* device_alloc_frag_buf - rx fragement pre-allocated function
* device_free_tx_bufs - free tx buffer function
* device_dma0_tx_80211- tx 802.11 frame via dma0
* device_dma0_xmit- tx PS bufferred frame via dma0
* device_dma0_xmit- tx PS buffered frame via dma0
* device_init_registers- initial MAC & BBP & RF internal registers.
* device_init_rings- initial tx/rx ring buffer
* device_init_defrag_cb- initial & allocate de-fragement buffer.
......@@ -316,7 +316,7 @@ static void device_init_diversity_timer(PSDevice pDevice)
//
// Initialiation of MAC & BBP registers
// Initialization of MAC & BBP registers
//
static BOOL device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
......@@ -639,7 +639,7 @@ static BOOL device_release_WPADEV(PSDevice pDevice)
viawget_wpa_header *wpahdr;
int ii=0;
// wait_queue_head_t Set_wait;
//send device close to wpa_supplicnat layer
//send device close to wpa_supplicant layer
if (pDevice->bWPADEVUp==TRUE) {
wpahdr = (viawget_wpa_header *)pDevice->skb->data;
wpahdr->type = VIAWGET_DEVICECLOSE_MSG;
......@@ -1010,7 +1010,7 @@ static int device_open(struct net_device *dev) {
}
if (device_init_defrag_cb(pDevice)== FALSE) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Initial defragement cb fail \n");
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Initial defragment cb fail \n");
goto free_rx_tx;
}
......@@ -1345,7 +1345,7 @@ static int Config_FileGetParameter(unsigned char *string,
}
memset(buf2,0,100);
memcpy(buf2,start_p,end_p-start_p); //get the tartget line
memcpy(buf2,start_p,end_p-start_p); //get the target line
buf2[end_p-start_p]='\0';
//find value
......@@ -1396,7 +1396,7 @@ static unsigned char *Config_FileOperation(PSDevice pDevice)
}
if(!(filp->f_op) || !(filp->f_op->read) ||!(filp->f_op->write)) {
printk("file %s cann't readable or writable?\n",config_path);
printk("file %s is not read or writeable?\n",config_path);
result = -1;
goto error1;
}
......@@ -1969,7 +1969,7 @@ static int device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) {
default:
rc = -EOPNOTSUPP;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Ioctl command not support..%x\n", cmd);
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Ioctl command not supported..%x\n", cmd);
}
......
......@@ -1048,7 +1048,7 @@ BYTE abyArray[256];
wLength1,
abyArray
);
//Channle Table 0
//Channel Table 0
wValue = 0;
while ( wLength2 > 0 ) {
......@@ -1106,7 +1106,7 @@ BYTE abyArray[256];
wLength1,
abyArray);
//Channle Table 0
//Channel Table 0
wValue = 0;
while ( wLength2 > 0 ) {
......
......@@ -1827,7 +1827,7 @@ s_bPacketToWirelessUsb(
*
* Parameters:
* In:
* pDevice - Pointer to adpater
* pDevice - Pointer to adapter
* dwTxBufferAddr - Transmit Buffer
* pPacket - Packet from upper layer
* cbPacketSize - Transmit Data Length
......@@ -2473,7 +2473,7 @@ vDMA0_tx_80211(PSDevice pDevice, struct sk_buff *skb) {
cbMacHdLen = WLAN_HDR_ADDR3_LEN;
}
// hostapd deamon ext support rate patch
// hostapd daemon ext support rate patch
if (WLAN_GET_FC_FSTYPE(p80211Header->sA4.wFrameCtl) == WLAN_FSTYPE_ASSOCRESP) {
if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len != 0) {
......@@ -2591,7 +2591,7 @@ vDMA0_tx_80211(PSDevice pDevice, struct sk_buff *skb) {
pMACHeader->wFrameCtl &= cpu_to_le16(0xfffc);
memcpy(pbyPayloadHead, (skb->data + cbMacHdLen), cbFrameBodySize);
// replace support rate, patch for hostapd deamon( only support 11M)
// replace support rate, patch for hostapd daemon( only support 11M)
if (WLAN_GET_FC_FSTYPE(p80211Header->sA4.wFrameCtl) == WLAN_FSTYPE_ASSOCRESP) {
if (cbExtSuppRate != 0) {
if (((PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates)->len != 0)
......@@ -2855,7 +2855,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
}
PRINT_K("Authentication completed!!\n");
}
else if((Key_info & BIT3) && (Descriptor_type==2) && //RSN pairse-key challenge
else if((Key_info & BIT3) && (Descriptor_type==2) && //RSN pairwise-key challenge
(Key_info & BIT8) && (Key_info & BIT9)) {
pDevice->fWPA_Authened = TRUE;
PRINT_K("WPA2 Authentication completed!!\n");
......
......@@ -18,7 +18,7 @@
*
* File: tcrc.c
*
* Purpose: Implement functions to caculate CRC
* Purpose: Implement functions to calculate CRC
*
* Author: Tevin Chen
*
......
......@@ -18,7 +18,7 @@
*
* File: tcrc.h
*
* Purpose: Implement functions to caculate CRC
* Purpose: Implement functions to calculate CRC
*
* Author: Tevin Chen
*
......
......@@ -25,7 +25,7 @@
* Date: May 21, 1996
*
* Functions:
* ETHbyGetHashIndexByCrc32 - Caculate multicast hash value by CRC32
* ETHbyGetHashIndexByCrc32 - Calculate multicast hash value by CRC32
* ETHbIsBufferCrc32Ok - Check CRC value of the buffer if Ok or not
*
* Revision History:
......@@ -50,7 +50,7 @@
/*
* Description: Caculate multicast hash value by CRC32
* Description: Calculate multicast hash value by CRC32
*
* Parameters:
* In:
......
......@@ -168,7 +168,7 @@ static unsigned int rotr1(unsigned int a)
/*
* Description: Caculate RC4Key fom TK, TA, and TSC
* Description: Calculate RC4Key fom TK, TA, and TSC
*
* Parameters:
* In:
......
......@@ -263,7 +263,7 @@ s_vProbeChannel(
*
*
* Return Value:
* A ptr to Tx frame or NULL on allocation failue
* A ptr to Tx frame or NULL on allocation failure
*
-*/
......@@ -794,7 +794,7 @@ void vRunCommand(void *hDeviceContext)
DBG_PRT(MSG_LEVEL_DEBUG,
KERN_INFO "vMgrCreateOwnIBSS fail!\n");
}
// alway turn off unicast bit
// always turn off unicast bit
MACvRegBitsOff(pDevice, MAC_REG_RCR, RCR_UNICAST);
pDevice->byRxMode &= ~RCR_UNICAST;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode );
......@@ -946,7 +946,7 @@ void vRunCommand(void *hDeviceContext)
pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
pItemSSID->len = 0;
memset(pItemSSID->abySSID, 0, WLAN_SSID_MAXLEN);
//clear dessire SSID
//clear desired SSID
pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
pItemSSID->len = 0;
memset(pItemSSID->abySSID, 0, WLAN_SSID_MAXLEN);
......
......@@ -89,7 +89,7 @@ BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
ADD_ONE_WITH_WRAP_AROUND(uIndex, DUPLICATE_RX_CACHE_LENGTH);
}
}
/* Not fount in cache - insert */
/* Not found in cache - insert */
pCacheEntry = &pCache->asCacheEntry[pCache->uInPtr];
pCacheEntry->wFmSequence = pMACHeader->wSeqCtl;
memcpy(&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0]), ETH_ALEN);
......
......@@ -27,7 +27,7 @@
*
* Functions:
* nsMgrObjectInitial - Initialize Management Objet data structure
* vMgrObjectReset - Reset Management Objet data structure
* vMgrObjectReset - Reset Management Object data structure
* vMgrAssocBeginSta - Start associate function
* vMgrReAssocBeginSta - Start reassociate function
* vMgrDisassocBeginSta - Start disassociate function
......@@ -2188,7 +2188,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
// During dpc, already in spinlocked.
if (BSSbIsSTAInNodeDB(pDevice, sFrame.pHdr->sA3.abyAddr2, &uNodeIndex)) {
// Update the STA, (Techically the Beacons of all the IBSS nodes
// Update the STA, (Technically the Beacons of all the IBSS nodes
// should be identical, but that's not happening in practice.
pMgmt->abyCurrSuppRates[1] = RATEuSetIE((PWLAN_IE_SUPP_RATES)sFrame.pSuppRates,
(PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
......@@ -2722,7 +2722,7 @@ void vMgrJoinBSSBegin(void *hDeviceContext, PCMD_STATUS pStatus)
memcpy(pDevice->abyBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
// Add current BSS to Candidate list
// This should only works for WPA2 BSS, and WPA2 BSS check must be done before.
// This should only work for WPA2 BSS, and WPA2 BSS check must be done before.
if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
BOOL bResult = bAdd_PMKID_Candidate((void *) pDevice,
pMgmt->abyCurrBSSID,
......@@ -3181,7 +3181,7 @@ s_vMgrFormatTIM(
*
*
* Return Value:
* PTR to frame; or NULL on allocation failue
* PTR to frame; or NULL on allocation failure
*
-*/
......@@ -3353,7 +3353,7 @@ s_MgrMakeBeacon(
*
*
* Return Value:
* PTR to frame; or NULL on allocation failue
* PTR to frame; or NULL on allocation failure
*
-*/
......@@ -3528,7 +3528,7 @@ s_MgrMakeAssocRequest(
memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
// Set the capibility and listen interval
// Set the capability and listen interval
*(sFrame.pwCapInfo) = cpu_to_le16(wCurrCapInfo);
*(sFrame.pwListenInterval) = cpu_to_le16(wListenInterval);
......@@ -3749,7 +3749,7 @@ s_MgrMakeAssocRequest(
*
*
* Return Value:
* A ptr to frame or NULL on allocation failue
* A ptr to frame or NULL on allocation failure
*
-*/
......@@ -3792,7 +3792,7 @@ s_MgrMakeReAssocRequest(
memcpy( sFrame.pHdr->sA3.abyAddr2, pMgmt->abyMACAddr, WLAN_ADDR_LEN);
memcpy( sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
/* Set the capibility and listen interval */
/* Set the capability and listen interval */
*(sFrame.pwCapInfo) = cpu_to_le16(wCurrCapInfo);
*(sFrame.pwListenInterval) = cpu_to_le16(wListenInterval);
......@@ -4004,7 +4004,7 @@ s_MgrMakeReAssocRequest(
*
*
* Return Value:
* PTR to frame; or NULL on allocation failue
* PTR to frame; or NULL on allocation failure
*
-*/
......@@ -4077,7 +4077,7 @@ s_MgrMakeAssocResponse(
*
*
* Return Value:
* PTR to frame; or NULL on allocation failue
* PTR to frame; or NULL on allocation failure
*
-*/
......
......@@ -231,7 +231,7 @@ WPA_ParseRSN(
* Parameters:
* In:
* byCmd - Search type
* byEncrypt- Encrcypt Type
* byEncrypt- Encrypt Type
* pBSSList - BSS list
* Out:
* none
......
......@@ -174,16 +174,16 @@ WPA2vParseRSN (
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_USE_GROUP;
bUseGK = TRUE;
} else if ( !memcmp(pbyOUI, abyOUIWEP40, 4)) {
// Invialid CSS, continue to parsing
// Invalid CSS, continue parsing
} else if ( !memcmp(pbyOUI, abyOUITKIP, 4)) {
if (pBSSNode->byCSSGK != WLAN_11i_CSS_CCMP)
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_TKIP;
else
; // Invialid CSS, continue to parsing
; // Invalid CSS, continue parsing
} else if ( !memcmp(pbyOUI, abyOUICCMP, 4)) {
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_CCMP;
} else if ( !memcmp(pbyOUI, abyOUIWEP104, 4)) {
// Invialid CSS, continue to parsing
// Invalid CSS, continue parsing
} else {
// any vendor checks here
pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_UNKNOWN;
......
......@@ -74,7 +74,7 @@ static void wpadev_setup(struct net_device *dev)
/*
* Description:
* register netdev for wpa supplicant deamon
* register netdev for wpa supplicant daemon
*
* Parameters:
* In:
......@@ -154,7 +154,7 @@ static int wpa_release_wpadev(PSDevice pDevice)
/*
* Description:
* Set enable/disable dev for wpa supplicant deamon
* Set enable/disable dev for wpa supplicant daemon
*
* Parameters:
* In:
......@@ -326,7 +326,7 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
if ((byKeyDecMode == KEY_CTL_TKIP) &&
(param->u.wpa_key.key_len != MAX_KEY_LEN)) {
// TKIP Key must be 256 bits
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "return- TKIP Key must be 256 bits!\n");
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "return - TKIP Key must be 256 bits!\n");
return -EINVAL;
}
// Check AES key length
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment