Commit a0b15506 authored by Mark Brown's avatar Mark Brown

Merge branch 'for-2.6.39' into for-2.6.40

parents 31215871 e1bb31b4
......@@ -45,25 +45,25 @@
/* platform domain */
#define SND_SOC_DAPM_INPUT(wname) \
{ .id = snd_soc_dapm_input, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0}
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_OUTPUT(wname) \
{ .id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0}
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_MIC(wname, wevent) \
{ .id = snd_soc_dapm_mic, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0, .event = wevent, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
#define SND_SOC_DAPM_HP(wname, wevent) \
{ .id = snd_soc_dapm_hp, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0, .event = wevent, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_SPK(wname, wevent) \
{ .id = snd_soc_dapm_spk, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0, .event = wevent, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_LINE(wname, wevent) \
{ .id = snd_soc_dapm_line, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0, .event = wevent, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
/* path domain */
......@@ -189,11 +189,11 @@
/* events that are pre and post DAPM */
#define SND_SOC_DAPM_PRE(wname, wevent) \
{ .id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0, .event = wevent, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_POST(wname, wevent) \
{ .id = snd_soc_dapm_post, .name = wname, .kcontrols = NULL, \
.num_kcontrols = 0, .event = wevent, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
/* stream domain */
......
......@@ -772,6 +772,7 @@ static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
return 0;
}
#ifdef CONFIG_REGULATOR
static int ldo_regulator_is_enabled(struct regulator_dev *dev)
{
struct ldo_regulator *ldo = rdev_get_drvdata(dev);
......@@ -901,6 +902,19 @@ static int ldo_regulator_remove(struct snd_soc_codec *codec)
return 0;
}
#else
static int ldo_regulator_register(struct snd_soc_codec *codec,
struct regulator_init_data *init_data,
int voltage)
{
return -EINVAL;
}
static int ldo_regulator_remove(struct snd_soc_codec *codec)
{
return 0;
}
#endif
/*
* set dac bias
......
......@@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
slave_config.direction = DMA_TO_DEVICE;
slave_config.dst_addr = dma_params->dma_addr;
slave_config.dst_addr_width = buswidth;
slave_config.dst_maxburst = dma_params->burstsize;
slave_config.dst_maxburst = dma_params->burstsize * buswidth;
} else {
slave_config.direction = DMA_FROM_DEVICE;
slave_config.src_addr = dma_params->dma_addr;
slave_config.src_addr_width = buswidth;
slave_config.src_maxburst = dma_params->burstsize;
slave_config.src_maxburst = dma_params->burstsize * buswidth;
}
ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
......@@ -303,6 +303,11 @@ static struct snd_soc_platform_driver imx_soc_platform_mx2 = {
static int __devinit imx_soc_platform_probe(struct platform_device *pdev)
{
struct imx_ssi *ssi = platform_get_drvdata(pdev);
ssi->dma_params_tx.burstsize = 6;
ssi->dma_params_rx.burstsize = 4;
return snd_soc_register_platform(&pdev->dev, &imx_soc_platform_mx2);
}
......
......@@ -234,7 +234,4 @@ void imx_pcm_free(struct snd_pcm *pcm);
*/
#define IMX_SSI_DMABUF_SIZE (64 * 1024)
#define DMA_RXFIFO_BURST 0x4
#define DMA_TXFIFO_BURST 0x6
#endif /* _IMX_SSI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment